Attachment1_SPECS.pdf

SPECIFICATIONS FOR 10K FORKLIFT

A. ITEM: 0001

Forklift, 10,000 lbs, long forks, side-shift, fork mover.

(1) ECC: G1723

(2) Quantity: Two (2) each (Iwakuni)

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese motor Vehicle Safety

Standard in effect on the date of manufacture.

B. VEHICLE SPECIFICATIONS:

(1) CAPACITY OF BASE MODEL: 5 – 6 ton.

(2) REQUIRED LIFTING CAPACITY: 4.5 ton at 3,000 mm from the ground with 600 mm fork center.

(3) FORK LIFT HEIGHT: 3,000 mm.

(4) MAST: Two (2) stage mast.

(5) LENGTH OF FORKS: 1,970 mm.

(6) OUTER MOST DISTANCE BETWEEN FORKS: Manufacturer’s standard.

(7) SIDE SHIFT/FORK MOVER: Manufacturer’s standard side shift and fork mover with two (2) shift levers.

(8) ENGINE: Manufacturer’s standard engine for 5 – 6 ton capacity base model.

(9) TRANSMISSION: Automatic transmission.

(10) BATTERY: Appropriate size/capacity for the engine.

(11) COLOR: Orange or yellow be the main color.

(12) STEERING: Power steering.

(13) BRAKES: Manufacturer’s standard.

(14) TIRES: Manufacturer’s standard pneumatic tires. Dual front tires.

(15) INSTRUMENT/GAUGES: Manufacturer’s standard to include hour meter.

(16) LIGHTS: Manufacturer’s standard to include head lights, signal lights, brake lights and two working lights in front.

(17) TOOLS: Standard tools normally provided by the manufacturer.

(18) SEAT & SEAT BELT: Manufacturer’s standard.

(19) FLOOR MAT: Manufacturer’s standard.

(20) WARNING DEVICES: Manufacturer’s standard to include back up warning buzzer and yellow beacon light at highest point.

(21) SIDE VIEW MIRRORS: Manufacturer’s standard on both sides.

(22) FIRE EXTINGUISHER: Minimum 2 lb. (1.0 kg) ABC type.

(23) Loading capacity curb plate must be visible from operator.

(24) Equipment with visible rusts and a dirty condition shall not be accepted.

C. WARRANTY OF EXTERNAL BODY SHEETS:

a. Three year warranty on perforations in external body sheets due to rust under normal usage.

b. One year warranty on rust at surface of external body sheets under normal usage.

c. The warranty work shall be provided by dealer(s) around Iwakuni, Japan.

D. GOVERNMENT OF JAPAN SAFETY STANDARDS: The vehicles shall meet or exceed Government of

Japan’s Law, Road Vehicle Act Safety Standards and exhaust emission control requirements.

E. SUBMITTALS: Following shall be furnished for consignee by Contractor at time of vehicle delivery.

a. Warranties and Manuals:

(1) One (1) manufacturer’s standard warranty for each forklift. Standard Japanese.

(2) One (1) Operation manual for each forklift. Standard Japanese.

(3) One (1) Operation manual for each forklift. English if available.

(4) One (1) Maintenance manual. Standard Japanese. CD’s not acceptable.

(5) One (1) Parts manual. Standard Japanese. CD’s not acceptable.

(6) Engine serial number for each forklift

b. Certificates:

(1) One (1) Certificate of Transfer for each forklift. Standard Japanese.

(2) A document with vehicle specifications for each forklift.

(3) One (1) Certificate of load tested w/maximum load plus 10% of max. load by appropriate method certified by the U.S. government for each forklift. Tested date required.

F. INTENDED USE: The vehicle covered by this specification is intended for shop and warehouse use by the

U.S. Government in transporting material. The vehicle furnished hereunder shall be delivered ready for immediate use.

G. DELIVERY POINT: All transportation charges borne by the contractor to the Logistics Department Motor

Transportation Division office, MCAS Iwakuni, Japan Bldg. #130A FPO AP 96310-0019, Mr. Yasuhiro Seiji, Tel

0827-79-4736; e-mail: yasuhiro.seiji.ja@usmc.mil.

H. DELIVERY DATE: The vehicle shall be delivered at the delivery point specified above within 120 days from the date of contract.

I. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicle furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

J. INVOICES WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition

Department, PSC 473 BOX 13, FPO AP 96349-0013,Bldg. 1828, 2F, Tomari-cho, Yokosuka, Kanagawa, Japan

238-0001.

mailto:yasuhiro.seiji.ja@usmc.mil

SPECIFICATIONS FOR 4K FORKLIFT

A. ITEM 0002

Forklift; 2-Ton (4000 LBS) Full-Free Lift Three Stage Mast, SIDE SHIFT, Diesel, Automatic transmission, 4Wheel

Solid tires, Sit Down.

(1) G19DDM/G1706 (TAM).

(2) Quantity: Two (2) each (Camp Butler)

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below.

B. MINIMUM DIMENSIONS (Millimeters/Kilograms).

mm/lbs.

Overall Length 3596.64mm “ Width 1158.24mm

“ Height 7.1ft (2200mm; Full-Free Lift Three-Stage Mast – 4700 mm)

Payload Capacity 4,000lbs (2-ton)

Wheel base 1676.4mm

Fork length/width 1070 mm x 122 mm

C. REQUIREMENTS.

(1) Exterior Color: Yellow (LEAD AND CHROMATE FREE PAINT)

(2) Rust proofing and Undercoating:

1. Rust proofing treatment to be done with Ziebart product or equal anti-corrosion product.

2. Internal hidden crevices, panels and beams will be treated with anti-corrosion material.

3. Undersides and undercarriage will be treated with black undercoating material. Finished material will not be tacky, sticky or smear to the touch.

4. Exterior area roof will be treated with paint protection.

(3) Engine Displacement: Diesel engine

(4) Seat Belts: 3-point harness for driver only

(5) Transmission System: Automatic transmission

(6) Speedometer/Odometer: Hours

(7) Fire Extinguisher: (1) ABC dry chemical fire extinguisher shall be installed with bracket for each.

(8) Tires: 4 standard tires

(9) Triangle Reflectors: Three (3) emergency flare and triangle reflectors per vehicle

(10) Lights: Headlights,Taillights, and Turn signals

(11) Warranty:

1. Manufacturer’s basic whole vehicle warranty.

2. All warranty service and repair parts must be available on the island of Okinawa, Japan.

3. Standard commercial warranty.

4. Inspection date will be responsibility of the Contractor Company.

5. The contractor will provide transportation for warranty/service work and inspections

6. One year or 1200 hours

(12) Technical Publications (In Japanese): Text or CD-ROM (Japanese or English)

1. One (1) operator’s manual for each vehicle.

2. Two (2) sets of parts manual.

3. Two (2) sets of repair manual & technical bulletins.

4. One (1) copy of warranty for each vehicle.

5. One (1) certificate of origin for each vehicle.

(13) Accessories: Back up Alarm; Mirrors (On the sides); Install Back Rest

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicles covered by this specification for general administrative use. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor to

Commanding General (M67400)

Marine Corps Base Butler (code G-4/GME)

Camp S.D. Butler, Okinawa

DODAAC M67400

Ship to mark for: G-4/GME, Unit 35001

POC: GME Fleet Manager (Capt Sandford/SSgt McClures)

COMM: 098-970-2871

Email: robert.l.mcclures@usmc.mil

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 60 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition

Department, PSC 473 BOX 13, FPO AP 96349-0013,Bldg. 1828, 2F, Tomari-cho, Yokosuka, Kanagawa, Japan

238-0001.