Attachment01_REVISEDSPECS_ITEM0002_4K_FORKLIFT.pdf

VEHICLE SPECIFICATIONS (Revised 31 March 2014)

A. ITEM 0002

General Description: Forklift; 2-Ton (4000 LBS) Full-Free Lift Three Stage Mast, SIDE SHIFT, Diesel, Automatic transmission, Sit Down.

(a) Quantity: Two (2) each (Camp Butler)

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below.

B. MINIMUM DIMENSIONS (Millimeters/Kilograms).

mm/lbs.

Overall Length 3596.64mm “ Width 1158.24mm “ Height 7.1ft (2200mm; Full-Free Lift Three-Stage Mast – 4700 mm)

Payload Capacity 4,000lbs(2-ton) Wheel base 1675.4 mm 1620 mm Fork length/width 1070 mm x 122 mm

C. REQUIREMENTS.

(1) Exterior Color: Yellow (LEAD AND CHROMATE FREE PAINT)

(2) Rust proofing and Undercoating:

1. Rust proofing treatment to be done with Ziebart product or equal anti-corrosion product.

2. Internal hidden crevices, panels and beams will be treated with anti-corrosion material.

3. Undersides and undercarriage will be treated with black undercoating material. Finished material will not be tacky, sticky or smear to the touch.

4. Exterior area roof will be treated with paint protection.

(3) Engine Displacement: Diesel engine

(4) Seat Belts: 3-point 2-point harness for driver only

(5) Transmission System: Automatic transmission

(6) Speedometer/Odometer: Hours

No. Fire Extinguisher: (1) ABC dry chemical fire extinguisher shall be installed with bracket for each.

(7) Tires: 4 standard tires

(8) Triangle Reflectors: Three (3) emergency flare and triangle reflectors per vehicle

(9) Lights: Headlights,Taillights, and Turn signals

(10) Warranty:

1. Manufacturer’s basic whole vehicle warranty.

2. All warranty service and repair parts must be available on the island of Okinawa, Japan.

3. Standard commercial warranty.

4. Inspection date will be responsibility of the Contractor Company.

5. The contractor will provide transportation for warranty/service work and inspections

6. One year or 1200 hours

(11) Technical Publications (In Japanese): Text or CD-ROM (Japanese or English)

1. One (1) operator’s manual for each vehicle.

2. Two (2) sets of parts manual.

3. Two (2) sets of repair manual & technical bulletins.

4. One (1) copy of warranty for each vehicle.

5. One (1) certificate of origin for each vehicle.

(12) Accessories: Back up Alarm; Mirrors(On th e sides); Install Back Rest

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicles covered by this specification for general administrative use. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor to

Commanding General (M67400) Marine Corps Base Butler (code G-4/GME) Camp S.D. Butler, Okinawa

DODAAC M67400

Ship to mark for: G-4/GME, Unit 35001 POC: GME Fleet Manager (Capt Sandford/SSgt McClures)

COMM: 098-970-2871

Email: robert.l.mcclures@usmc.mil

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 60 calendar days after delivery order is issued 75 calendar days after contract award.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department, PSC 473 BOX 13, FPO AP 96349-0013,Bldg. 1828, 2F, Tomari-cho, Yokosuka, Kanagawa, Japan 238-0001.