N3904026Q3157 Attachment 3- Compliance Checklist Unit 2- 17K.pdf

This document is a specification checklist for the procurement of a counterbalanced diesel forklift. The required equipment must have a capacity between 17,000 and 20,000 pounds at a 24-inch rated load center, with units possessing different official specifications deemed acceptable if capacity is equivalent when adjusted for load center. The forklift must feature a maximum outside turning radius of 160 inches, standard tip and taper forks with maximum width of 6 inches and maximum thickness of 3 inches, a minimum length of 72 inches with a preferred length of 96 inches, and a minimum outside fork spread capability of 72 inches.

Additional mandatory specifications include internal combustion diesel power, equipment no older than 5 years, pneumatic or foam-filled tires, and an enclosed cab equipped with heat, defrost, and air circulating fan (temporary or aftermarket enclosures are acceptable, with a rain canopy acceptable only if no bidder meets specifications without exception). The forklift must be equipped with independent side-shift not controlled by fork positioners, hydraulic fork positioners, front and rear working lights, an audible backup alarm, a manufacturer's capacity data plate showing safe working load and maximum reach height, clearly marked operator controls, and an operator's manual housed within the machine. The document provides a compliance checklist with "Yes" and "No" columns for bidder evaluation against each specification.