N3904026Q0056 Q and A.pdf
PDF 129 KB Posted
- Attached to
- PNSY Zinc Plating Services
- Solicitation number
- N3904026Q0056
About this file
This is a Questions and Answers (Q&A) document from a federal contracting solicitation addressing plating and material specifications for parts.
The document clarifies material composition and plating requirements for parts to be delivered under the contract. The parts shall be manufactured from HY-80 material per NAVSEA specification TM T9074-BD-GIB-010/0300, which supersedes MIL-S-16216, with a required Brinell hardness specification of 200-260 HB. Plating shall be applied to all surfaces of the parts except within the spline and keyway areas. A detailed drawing indicating areas that should not be plated has been provided and is posted in the SAM notice for reference by prospective contractors during proposal preparation.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q&A
Question:
• Can you please provide Material of part, the RC Hardness, marked up photos of areas requiring masking or full print showing dimensions and surfaces in which masking is to be applied?
Answer:
• The material is HY-80 per spec NAVSEA TM T9074-BD-GIB-010/0300 (which superseded MIL- S-16216). The Brinell hardness is 200-260 HB.
• The parts shall be plated everywhere except within the spline & keyway. See attached for what should NOT be plated.
• The attached drawing is posted in the SAM notice and labeled as what not to plate
File details come from the government source that posted it. Updated .