N39040254275Q113 Attachment 3 DRAIN MANIFOLD DWG 2.pdf

12.00

14.00

8.50

4.00

14 7 2

5.00

All assembed as shown. To open: Loosen all knobs. Rotate upper knobs away to remove glass panel.1.

Pressure tested to 1000 +/- 50 psig, Shell test.2.

No Lead/Brass/Bronze/Cadmium plated or zinc plated items shall be used.3.

Bottom portion of box shall be filled with water for ten minutes. No leakage is allowed.4.

Manifold fluid parts shall be cleaned to Swagelok specification (SC-11) SCS-00011 (latest version) with lubricant MIL-L-24131 (any 5.

Rev) as the only approved lubricant; Valves shall be assembled using lubricant MIL-L-24131 (any Rev) or DOW Corning 111.

All manifold openings are required to be capped/plugged using Swagelok Part number SS-600-CSC11/SS-600-PBLBLQ. 6.

All NPT or ISO tapered thread connections will be made with PTFE tape.7.

Dimensions subject to variation where threaded pull-up is involved.8.

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

CASE

NO.

THIS ASSEMBLY DESIGN, FUNCTION, AND APPLICATION ARE THE EXPRESS SOLE RESPONSIBILITY OF THE PURCHASER. PURCHASER IS SOLELY RESPONSIBLE FOR THE FIT AND FUNCTION OF ANY COMPONENTS. PURCHASER AGREES TO HOLD HARMLESS AND INDEMNIFY SWAGELOK FROM AND AGAINST ANY CLAIMS ARISING FROM OR RELATING TO ANY OF THE FOREGOING.

NORWK-GO10270 REV A

APPROVED? YES NO

BY/DATE?

- DRAWING NOT TO SCALE

- DIMENSIONS ARE INCHES NEXT

TO [MILLIMETERS]

- DRAWING IS SUBJECT TO

CHANGE WITHOUT NOTICE

AREV

THIS PRINT IS THE EXCLUSIVE PROPERTY OF SWAGELOK COMPANY. IT MUST BE RETURNED ON REQUEST ALONG WITH ANY DOCUMENTS CONTAINING INFORMATION OBTAINED FROM THIS PRINT. NEITHER THIS PRINT NOR ANY PART OF IT NOR ANY INFORMATION CONCERNING IT MAY BE COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE EXCEPT IN FURTHERANCE OF YOUR BUSINESS WITH SWAGELOK. THE PARTS REFERRED TO ON THIS PRINT MAY BE THE SUBJECT OF PATENTS AND/OR PENDING APPLICATIONS AND MAY NOT BE MANUFACTURED WITHOUT PERMISSION FROM THE SWAGELOK COMPANY.

9/18/2014

CUSTOMER APPROVAL

PART

NO.

NORWK-GO10270

DRAWN BY

Sheet1

CONCEPT DRAWING

APPROVED BY

TITLE

PART

NO.

ITEM NO. PART NUMBER QTY. DESCRIPTION VENDOR

1 SS-43GS6-LLC-M111-W1 1 SS 43 series ball valve, 3/8 swage ends, w/Lock Handle, DOW 111

Cleaned Swagelok 2 SS-600-3SC11 1 Union tee, 3/8 Swage ends, SC11 Cleaned Swagelok 3 SS-600-CSC11 1 SS 3/8" swage cap, SC11 Cleaned Swagelok 4 SS-600-PBLBQ 2 SS Swagelok plug 3/8", with BLBQ cleaning Swagelok 5 304-S1-PP-BL 2 Bolted plastic clamp support blank Swagelok 6 304-S1-PP-6T 2 Bolted plastic clamp support for 3/8" OD tubing. Swagelok 7 SS-T6-S-049-20-O2 1 Knurled Knob 1/4-20 Stainless Steel Swagelok 8 92240A553 4 18-8 SS Hex Head Cap Screw, 1/4"-20 Thread, 2-3/4" Long, Fully Threaded McMaster 9 93776A421 8 18-8 SS Serrated-Flange Hex Locknut, 1/4"-20 Thread Size, 7/16" Wide, 15/64" Height McMaster 10 91830A581 4 Knurled Knob 1/4-20 Stainless Steel McMaster 11 9489T580 4 Routing Eyebolt, 304 SS, 1/4"-20 Thread, 2" Shank, 1-1/4" Thread Length McMaster 12 ENCLOSURE-GO10270 1 Aluminum 5052-H32 Grade, 0.90 Folded, Sealed Welded Enclosure 13 PLEXI-CLEAR-GO10270 1 Polycarbonate 1/4" Clear Minitek

CASE

NO.

THIS ASSEMBLY DESIGN, FUNCTION, AND APPLICATION ARE THE EXPRESS SOLE RESPONSIBILITY OF THE PURCHASER. PURCHASER IS SOLELY RESPONSIBLE FOR THE FIT AND FUNCTION OF ANY COMPONENTS. PURCHASER AGREES TO HOLD HARMLESS AND INDEMNIFY SWAGELOK FROM AND AGAINST ANY CLAIMS ARISING FROM OR RELATING TO ANY OF THE FOREGOING.

NORWK-GO10270 REV A

APPROVED? YES NO

BY/DATE?

- DRAWING NOT TO SCALE

- DIMENSIONS ARE INCHES NEXT

TO [MILLIMETERS]

- DRAWING IS SUBJECT TO

CHANGE WITHOUT NOTICE

AREV

THIS PRINT IS THE EXCLUSIVE PROPERTY OF SWAGELOK COMPANY. IT MUST BE RETURNED ON REQUEST ALONG WITH ANY DOCUMENTS CONTAINING INFORMATION OBTAINED FROM THIS PRINT. NEITHER THIS PRINT NOR ANY PART OF IT NOR ANY INFORMATION CONCERNING IT MAY BE COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE EXCEPT IN FURTHERANCE OF YOUR BUSINESS WITH SWAGELOK. THE PARTS REFERRED TO ON THIS PRINT MAY BE THE SUBJECT OF PATENTS AND/OR PENDING APPLICATIONS AND MAY NOT BE MANUFACTURED WITHOUT PERMISSION FROM THE SWAGELOK COMPANY.

9/18/2014

CUSTOMER APPROVAL

PART

NO.

NORWK-GO10270

DRAWN BY

Sheet2

CONCEPT DRAWING

APPROVED BY

TITLE

1.50

TYP (3)

NOTE: Upper handles drawn in open and closed positions for clarity

CASE

NO.

THIS ASSEMBLY DESIGN, FUNCTION, AND APPLICATION ARE THE EXPRESS SOLE RESPONSIBILITY OF THE PURCHASER. PURCHASER IS SOLELY RESPONSIBLE FOR THE FIT AND FUNCTION OF ANY COMPONENTS. PURCHASER AGREES TO HOLD HARMLESS AND INDEMNIFY SWAGELOK FROM AND AGAINST ANY CLAIMS ARISING FROM OR RELATING TO ANY OF THE FOREGOING.

NORWK-GO10270 REV A

APPROVED? YES NO

BY/DATE?

- DRAWING NOT TO SCALE

- DIMENSIONS ARE INCHES NEXT

TO [MILLIMETERS]

- DRAWING IS SUBJECT TO

CHANGE WITHOUT NOTICE

AREV

THIS PRINT IS THE EXCLUSIVE PROPERTY OF SWAGELOK COMPANY. IT MUST BE RETURNED ON REQUEST ALONG WITH ANY DOCUMENTS CONTAINING INFORMATION OBTAINED FROM THIS PRINT. NEITHER THIS PRINT NOR ANY PART OF IT NOR ANY INFORMATION CONCERNING IT MAY BE COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE EXCEPT IN FURTHERANCE OF YOUR BUSINESS WITH SWAGELOK. THE PARTS REFERRED TO ON THIS PRINT MAY BE THE SUBJECT OF PATENTS AND/OR PENDING APPLICATIONS AND MAY NOT BE MANUFACTURED WITHOUT PERMISSION FROM THE SWAGELOK COMPANY.

9/18/2014

CUSTOMER APPROVAL

PART

NO.

NORWK-GO10270

DRAWN BY

Sheet3

CONCEPT DRAWING

APPROVED BY

TITLE