45N_CDRL_A010.doc

CONTRACT DATA REQUIREMENTS LIST

FORM APPROVED

OMB No.0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instruction, searching existing data sources, gathering and maintaining the data needed and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to, Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contract Office for the Contract/PR No. listed in Block E.

TBD

1. DATA ITEM NO.

A010

2. TITLE OF DATA ITEM

Configuration Control Plan

3. SUBTITLE

4. AUTHORITY (DATA ACQUISITION DOCUMENT NO.)

DI-SESS-81875

5. CONTRACT REFERENCE

SOW Para 3.3.2.3

6. REQUIRING OFFICE

AD4.5.14

7. DD 250 REQ

LT

9. DIST STATEMENT REQUIRED

10. FREQUENCY

ONE/R

12 DATE OF FIRST

See BLK 16

14. DISTRIBUTION

b. COPIES

8. APP CODE

A

13. DATE OF SUBSEQUENT See BLK 16

Reg Repro

16. REMARKS

BLOCK 4: Contractor format acceptable. Data Item Description cited as a guide only.

BLOCK 8: and 13: The Government has 45 working days for review and acceptance or rejection. Contractor has 30 days for re-submittal if accepted with comments or rejected.

BLOCK 9: DISTRIBUTION STATEMENT D, Department of Defense and U.S. DoD contractors only (Critical Technology) (Date). Other requests shall be referred to (Cognizant Program Office assigned at time of award).

BLOCK 12: Report to be submitted NLT 45 days after completing studies, research, development, test and evaluation.

BLOCK 14: One (1) soft copy (Reg). Soft copy shall be delivered in the original and modifiable application (e.g., Microsoft Office, AutoCAD, etc.) to:

Building 2185 RM 1130

22347 Cedar Point Road

Patuxent River, MD 20670

DESTRUCTION NOTICE: Follow the procedures in DoD 5220.22-M, NISPOM, Section 5-705.

4.5.14 (See Block 16)

15.TOTAL

G. PREPARED BY

H. DATE

14 September 2018

I. APPROVED BY

J. DATE

DD FORM 1423, JUN 90 Previous editions are obsolete Page of Pages

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

_1598689473.pdf

DATA ITEM DESCRIPTION (DID)

Title: CONFIGURATION MANAGEMENT PLAN (MIL-STD-3046)

Number: DI-SESS-81875 Approval Date: 28 February 2013 AMSC Number: 9296 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: A/ARDEC (AR) Applicable Forms: N/A

Use/Relationship: The Configuration Management (CM) Plan describes the Supplying activities’ configuration management program and the methods, procedures, and controls used for effective configuration identification, change control, status accounting, and audits of the total configuration, including hardware, software and firmware. The principle use is to provide the Acquiring activity a basis for review, evaluation and monitoring of the CM program and its proposed components.

This DID contains the format, content and preparation instructions for the data product resulting from the work task specified in the solicitation.

This DID is approved for use by the US Army to support the Army interim standard MIL-STD- 3046, which will be canceled when a suitable non-government standard is developed or until two years from the date of the standard. When MIL-STD-3046 is canceled, this DID will also be canceled.

Requirements:

1. Reference documents. The applicable issue of any documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as cited in the current issue of the DODISS at the time of the solicitation, or for non-DODISS listed documents as stated herein.

2. Content. The Contractor's CM Plan shall be prepared in accordance with MIL-STD-3046 or IEEE 828 Standard for Configuration Management in Systems and Software Engineering (contractors format is acceptable, provide the information content of MIL-STD-3046 is met).

3. The following references may be useful in defining content: ANSI/EIA-649B, National Consensus Standard for Configuration Management; ISO 10007, Quality Management-Guidelines for Configuration Management; and MIL-HDBK-61A, Configuration Management Guidance.

(Copies of ANSI/EIA-649B are available online at www.techamerica.org/ or from TechAmerica, 601 Pennsylvania Ave., NW, North Building, Ste 600, Washington DC 20004-2650. Copies of ISO 10007 is available online at http://www.iso.org/iso/home/standards.htm. Copies of IEEE 828 are available online at www.ieee.org or from IEEE Service Center, 445 Hoes Lane, Piscataway NJ 08855- 1331.)

END OF DI-SESS-81875

Source: https://assist.dla.mil -- Downloaded: 2018-09-17T15:34Z Check the source to verify that this is the current version before use.

http://www.iso.org/iso/home/standards.htm