Questions and Answers for Solicitation N0040626QS147.pdf
PDF 50 KB Posted
- Attached to
- Solicitation for Steam Hose Assembly
- Solicitation number
- N0040626QS147
About this file
This is a Questions and Answers document for solicitation N0040626QS147 addressing clarifications on steam hose assembly requirements for NAVSUP FLT LOG CTR Puget Sound.
The solicitation requires 60 steam hose assemblies total: 10 units at 25 feet in length and 50 units at 50 feet in length. All hoses must feature a 2.0-inch inner diameter with a stainless steel metal liner, which is strongly required. The fittings must comply with MIL-DTL-29210 Dixon specifications, consisting of male fittings (P/N: MS26) and female fittings (P/N: GF81 with GB28 Spud included), fabricated from plated iron/steel. Shipping will occur FOB origin through WSS (Worldwide Supply Services) at no cost to the vendor. Upon material readiness, the vendor must submit a Request to Ship (RTS) notice, after which WSS will provide shipping labels and coordinate carrier pickup. Complete RTS instructions and necessary information are provided on page 15 of the solicitation document and will be furnished to the contract awardee.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers for Solicitation N0040626QS147 – Steam Hose Assembly
Q: As it states that ,"FOB Details Government Origin (Shipping Point)" does that mean the address it needs to be shipped to is;
"NAVSUP FLT LOG CTR PUGET SOUND PUGET SOUND (FISCPS),
467 W STREET BREMERTON,
WA 98314-5100 UNITED STATES".
A: This will ship FOB origin. Shipping will be through WSS. Once material is ready to ship the vendor will fill out an RTS notice and WSS will send shipping labels with a carrier to contact for pick up. Those instructions are on page 15 of the solicitation and all necessary information for the RTS notice will be provided to the awardee. There is no direct address provided and this is at no cost to the vendor.
Q: What is the Hose ID?
A: 2.0 inch as specified in (2) in Table-1
Q: What are the types of fittings on the ends of the assemblies?
A: Dixon fittings are specified in accordance with MIL-DTL-29210.
More specifically, following fittings meet the requirements:
Male fitting: P/N: MS26
Female fitting: P/N: GF81 (GB28 Spud included)
Q: What type of metal is required?
A: Plated Iron/Steel for fittings. Stainless steel for metal liner
Q: What is the diameter of the hose?
A: 2.0 inch as specified in (2) in Table-1. OD is not specified.
Q: In the past, we’ve fabricated steam hoses for the government using a metal liner, while in some cases it was not required. Are you able to confirm with the end user if the “metal liner” is or is not required for this solicitation?
A: Metal liner is strongly required.
Q: Are ten (10) ea. 25’ hoses or fifty (50) ea. 50’ hoses required for this solicitation?
A: Both are needed. Sixty (60) hoses total, ten (10) ea. 25’ hoses and fifty (50) ea. 50’ hoses.
File details come from the government source that posted it. Updated .