Attachment_7_TDP_Option_Selection_Worksheet_Rev_1.docx

Attachment 1 to CDRL A005

TDP OPTION SELECTION WORKSHEET

SYSTEM: ADC MK 3 and ADC MK 4 DATE PREPARED:

A. CONTRACT NO.

TBD

D. CDRL DATA ITEM NO.

A005

1. TDP Level (X and complete as applicable.)

A. |_| CONCEPTUAL LEVEL

|_| DEVELOPMENTAL LEVEL

|X| PRODUCTION LEVEL

B. REMARKS: N/A

2. TYPE AND FORMAT (X all that apply and complete as applicable)

A.

|X| TYPE 2D: 2D DRAWINGS

|_| TYPE 3D: 3D MODEL ONLY

|_| TYPE 3D: 3D MODELS WITH

ASSOCIATED 2D DRAWINGS

B.

|_| NATIVE CAD (SPECIFY TYPE) ___________________________

|_| ISO 10303 STEP FORMAT (Specify STEP PROTOCOL AP203, AP 214 etc.)

|X| ISO32000 PORTABLE DOCUMENT FORMAT

|X| OTHER ELECTRONIC FORMAT (SPECIFY TYPE)

______Drawing Interchange Format (DXF)_____ |X| HARDCOPY: To Support Physical Configuration Audit

REMARKS: ________________________________________________________

3. CAGE Code AND DOCUMENT

NUMBERS

A. |X| CONTRACTOR CAGE AND DOCUMENT NUMBERS

|_| GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D)

D. To Be Assigned By:

NUWC Keyport

4. DRAWING FORMATS (X one and complete as applicable)

|X| CONTRACTOR FORMAT.

|_| GOVERNMENT FORMAT.

REMARKS: _________________________________________________________________________________________

5. TDP ELEMENTS REQUIRED (X all that apply)

|_| ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR-OR THE FOLLOWING ARE REQUIRED:

|_| CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS

|_| DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

|X| PRODUCT DRAWINGS/MODELS AND ASSOCIATED LIST

|_| COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LIST

|X| QUALITY ASSURANCE PROVISIONS

|_| SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS

|X| SPECIFICATIONS

|X| SOFTWARE DOCUMENTATION

|X| SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LIST

6. ASSOCIATED LISTS (X and complete as applicable)

7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

|X|ASME Y14.100 ENGINEERING DRAWING PRACTICES WITH APPENDICES

|X| B |X| C |X| D |X| E

|X| ASME Y14.24 TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS

|X| ASME Y14.34 ASSOCIATED LIST

|X| ASME Y14.35 REVISION OF ENGINEERING DRAWINGS AND ASSOCIATED LIST

|_| ASME Y14.41 DIGITAL PRODUCT DATA PRACTICES

|X| ASME Y14.5 DIMENSIONING AND TOLERANCES

|_| OTHER STANDARDS APPLY AS DESCRIBED:

COMPANY STANDARDS PERMITTED: |X| YES |_| NO

8. OTHER TAILORING

Block 2B - ISO32000 PDFs must be full size, direct export (print-to-pdf) files Block 5 – Drawings shall not be marked with a statement indicating the item to be “SIMILAR TO”, “EQUIVALENT TO”, or “SAME AS.” The following note shall be included on new source controlled drawings and on existing source control drawings when these are affected by an engineering change: “ANY PROCUREMENT OF THIS SOURCE CONTROL ITEM FROM THE VENDORS IDENTIFIED HEREIN SHALL BE TO THIS DOCUMENT ONLY.”

Block 6 Assembly and Sub-Assembly levels.