N00178-14-R-3010_Amendment_3.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

This amendment extends the proposal response date until May 1, 2014 at 2:00PM EST., adds a quantity of 1 each to the planned hardw are charts found under Sections C and L for the Electronic Equipment Cabinet (EEE) (Right) SA-2811/U w ith CIWS for the SDTS Mod 5C in

FY2014; and corrects the Draw ing No. for the Boundary Defense Cabinet (BDC) to 8601114-000, OL-798(V)(2) in lieu of 8600737 under

Section C in the planned hardw are chart. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 13

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 09-Apr-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00178-14-R-3010

X 9B. DATED (SEE ITEM 11)

18-Mar-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Apr-2014

CODE

NSWCDD

ATTN: THERESA ASHTON/CODE CS40-11

THERESA.ASHTON@NAVY.MIL

17632 DAHLGREN ROAD STE 157

DAHLGREN VA 22488-5110

N00178 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00178-14-R-3010

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 17-Apr-2014 02:00 PM to 01-May-2014 02:00 PM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

1.0 BACKGROUND

The Naval Surface Warfare Center, Dahlgren Division (NSWCDD), F Department, is assigned as Acquisition

Engineering Agent (AEA) for Surface Ship Self Defense System (SSDS) Mark 2 (Mk2) by Program Executive

Officer (PEO) Integrated Warfare Systems (IWS). The Contractor shall produce and deliver hardware as specified by the Government’s Technical Data Packages (TDP’s) per individual delivery orders. The SSDS Mk 2 system includes hardware baselines identified as MOD 1D for the CVN 68 Class up to CVN 76; MOD 2D for LPD 17

Class; MOD 5C for LSD 41/49 Classes; and MOD 6C for CVN 78 Class. The SSDS Mk 2 system consists of, but is not limited to:

Command and Control Group (CCG) OK-691(V)1 and (V)2

Electronic Equipment Cabinet (EEE)(Left) SA-2811/U

Electronic Equipment Cabinet (EEE)(Right)SA-2811A/U

Electronic Equipment Cabinet (EEE)(Right)SA-2811A/U with CIWS Simulator

Power Temperature Control (PTC) for Advanced Computer Enclosure

(ACE) Remote Computer Equipment Module (CEM) OL-794/U.

Hotel solution

Mini-I/O Signal Data Converter Group OU-184(V) 1 CVN

Mini-I/O Signal Data Converter Group OU-184(V) 2 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-184(V) 3 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-184(V) 4 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-184(V) 5 LSD RTE GFE

Multipurpose Enclosure (MPE) CV-4437/F Type A/E

Multipurpose Enclosure (MPE) CV-4437/C Ethernet to

Ethernet

Multipurpose Enclosure (MPE) CV-4437/E IRIS

Uninterrupted Power Source (UPS) Rack (440VAC) PP-8588/U CPS UPS rack

Uninterrupted Power Source (UPS) Rack (115VAC) PP-8580/U

Indicate CDS

Boundary Defense Cabinet (BDC), nomenclature pending

1.1 SCOPE

This SOW describes the general requirements for the production of hardware in support of the SSDS Mk 2 system.

The scope includes hardware production (which may include Government Furnished Equipment (GFE)), assembly, configuration, alignment, integration, testing and shipping for the SSDS Mk 2 system hardware.

2.0 APPLICABLE DOCUMENTS

The following documents form a part of this SOW, to the extent specified herein. For convenience of reference, the

SOW text cites only the document title.

2.1 MILITARY STANDARDS

MIL-STD-108E Definitions of and Basic Requirements for Enclosures for Electronic

Equipment, 4 Aug 1996

MIL-STD-167-1A Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and

Type II – Internally Excited), 2 Nov 2005

MIL-STD-461F Electromagnetic Emissions and Susceptibility, Requirements for the Control of Electromagnetic Interference (EI), 10 Dec 2007

MIL-STD-740-1 Airborne Sound Measurements and Acceptance Criteria of Shipboard

Equipment, 30 Dec 1986

MIL-STD-740-2 Structure-Borne Vibratory Acceleration Measurements and Acceptance

Criteria of Shipboard Equipment, 30 Dec 1986

MIL-STD-810F Environmental Engineering Considerations and Laboratory Tests, 1 Jan 2000

MIL-STD-901D Shock Tests, H.I. (High Impact) Shipboard Machinery, Equipment, and

Systems Requirements, 17 Mar 1986

MIL-STD-1399C Interface Standard for Shipboard Systems, 2 Feb 1988

MIL-HDBK-2036 General Requirements for Electronic Equipment Specifications, 1 Nov 1999

MIL-STD-2073-1E with Change 1 Standard Practice for Military Packaging, 7 Jan 2011

MIL-STD-129P with Change 4 Military Marking for Shipment and Storage, 19 Sept 2007

2.2 OTHER SPECIFICATIONS AND STANDARDS

9470-002-A-X-C Configuration Management Plan (CMP) for PEO TSC Programs, 5 Jan 1996

EIA/IS-632 Systems Engineering, Dec 1994

IEC-68-2-3 Basic environmental testing procedures (Non-condensing humidity), 1 Jan

ISO 9001 Quality Systems – Model for Quality Assurance in Design, Development, Production, Installation and Servicing

2.3 PRECEDENCE

Notification of any disagreement between the documents listed above and the Technical Data Package (TDP) drawings listed in Section 4.5 of this SOW shall be submitted in writing to the COR and the Contracting Officer prior to continuing performance.

3.0 REQUIREMENTS: SSDS Mk 2 HARDWARE PRODUCTION

The Contractor shall provide hardware production, assembly, part configuration, alignment, integration, testing, and shipping for the SSDS Mk 2 system hardware as specified by the Government’s TDP’s, consisting of mechanical, electrical and assembly drawings.

SSDS Mk 2 hardware production includes assembly and integration; testing of the assembled hardware in accordance with Government provided Factory Qualification Test (FQT) procedures; labeling of the assembled equipment hardware and parts with manufacturer serial numbers and Government assigned serial numbers, including Unique Identification (UID) information; packaging and crating of the hardware for shipment; and shipment to locations specified in individual delivery orders. Installation of the equipment aboard ship is not included in this SOW.

3.1 PROGRAM MANAGEMENT PLAN

The contractor shall provide a Program Management Plan (CDRL A001).

3.2 CONDUCT OF FACTORY QUALIFICATION TEST

The Government reserves the right to observe FQT, which will be performed at the contractor’s facility. The contractor shall provide the Government at least 14 days advanced notice of the test date. FQT procedures will be provided not later than 90 days after contract award.

The following shall be utilized as preliminary FQT procedures and shall be the basis for acceptance of delivered equipment:

1. The unit will be placed under power to demonstrate stable power to internal components.

2. All interconnect cables (Copper and Fiber) will be validated. The successful validation will demonstrate that the unit is wired correctly and the cables are functioning.

3. All network connections must be functional. This functional test will be validated by performing a “ping” test of the network.

4. All discreet cables will be verified.

5. Mechanical fit and functional test will be performed. This functional test will demonstrate the

“unencumber” opening and closing of doors, drawers, slides and “cable keeps”, etc.

6. All lights, indicators and switches must be functional.

4.0 OTHER REQUIREMENTS

4.1 PRODUCTION PLAN

The contractor shall provide production status reports as required. The first submission is due within two weeks of receipt of each delivery order (CDRL A002).

4.2 AS-BUILT CONFIGURATION AUDIT SUMMARY REPORT

The contractor shall provide an As-Built Configuration Audit Summary Report (CDRL A003) for all produced equipment.

4.3 GOVERNMENT FURNISHED EQUIPMENT (GFE), GOVERNMENT FURNISHED INFORMATION

(GFI) AND GOVERNMENT FURNISHED PROPERTY (GFP)

(a) The contractor shall account for and manage all GFE/GFI/GFP. The contractor shall inspect GFE/GFI/GFP upon receipt and maintain the status of all GFE/GFI/GFP in custody in accordance with FAR 52.245-1.

(b) The GFE/GFI/GFP requirements will be listed in Section J as an attachment to the contract.

4.4 PACKAGING, HANDLING, STORAGE & TRANSPORTATION (PHS&T)

The equipment produced must be packaged to withstand being stored in an uncontrolled environment (CDRL

A004). All production equipment shall be packaged in accordance with MIL-STD-2073-1E for preservation to protect material against environmentally induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation during storage, multiple handling, and shipment of material.

4.5 PLANNED SSDS Mk2 PRODUCTION HARDWARE

For informational purposes, the following is a list of anticipated production hardware. The hardware to be acquired, quantity and delivery date will be specified per individual delivery order. The TDP’s will be provided as applicable per individual delivery order.

FY2014

Estimated

Lead

Times

(Months)

LSD 45

Mod 5C

LSD 47

Mod 5C

ICSTF

Mod 5C

LSD 51

Mod 5C

SDTS

Mod 5C

LPD 23

Mod 2D

CVN 77

Mod 1D

CVN 70

Mod 1D

SSDS

Mk ½

ICSTD

SSDS

Mk2

Mod

1D/2D

WI

Mod

1D/2D

LSD 43

Mod 5C

Equipment Description FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14

Electronic Equipment Cabinet (EEE) (Left) SA-2811/U

Drawing # 8501280-1 (LSD) and

8501280-2 (CVN)

8 1 1 1 1 1 1 1

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U Drawing # 8501295-1 (LSD) and 8501295-2 (CVN), with 8600946

(FC1)

8 1

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U with CIWS Simulator Drawing # 8501295-1 (LSD) and

8501295-2 (CVN)

8 1 1 1 1 1 1

Power Temperature Control (PTC) for Advanced Computer Enclosure (ACE) Remote Computer Equipment Module (CEM) OL-794/U Drawing # 8501483

6 1 1 1 1 1 5 1

Hotel Solution

Drawing # 8600840

6 10 21 21 10 8 8

Mini-I/O Signal Data Converter Group OU-184(V) 1 CVN Drawing # 8504396-1 (LSD) and

8504396-2 (CVN)

Mini-I/O Signal Data Converter Group OU-184(V) 2 CVN RTE GFE Drawing # 8504397-1 (LSD) and

8504397-2 (CVN)

Mini-I/O Signal Data Converter Group OU-184(V) 3 CVN RTE GFE Drawing # 8504398-1 (LSD) and

8504398-2 (CVN)

8 1 1 1 1 1

Mini-I/O Signal Data Converter Group OU-184(V) 4 CVN RTE GFE Drawing # 8504399-1 (LSD) and

8504399-2 (CVN)

8 1 1 1 1 1 1

Mini-I/O Signal Data Converter

Group OU-184(V) 5 LSD RTE GFE Drawing # 8504443-1 (LSD) and

8504443-2 (CVN)

8 1 1 1 1 1 1

Multipurpose Enclosure (MPE) CV- 4437/F Type A/E Drawing # 8578278-1 (LSD) and

8578278-2 (CVN)

6 1 1 1 1 1

Multipurpose Enclosure (MPE) CV- 4437/C Ethernet to Ethernet Drawing # 8578275-1 (LSD) and

8578275-2 (CVN)

6 2 2 2 2 2 3 3 3 3 3 2

Multipurpose Enclosure (MPE) CV- 6 3 3 3 3 3 3

FY2015 – FY2017

4437/E IRIS

Drawing # 8578277-1 (LSD) and

8578277-2 (CVN)

Uninterrupted Power Source (UPS) Rack (440VAC) PP-8588/U CPS UPS Rack Drawing # 8600787

8 2 2 2 2 2 2 2 2 2 2 2 2

Uninterrupted Power Source (UPS) Rack (115VAC) PP-8580/U Indicate

CDS

Drawing # 8600788

8 3

Boundary Defense Cabinet (BDC), Nomenclature pending Drawing # 8601114-000

OL-798(V)(2)

8 2 2 2 2 2 2 2 2 2 2 2 2

Estimated

Lead

Times

(Months)

CVN 74

Mod 1D

LPD 18

Mod 2D

LPD 19

Mod 2D

LHD 2

Mod 3C

LPD Class

Mod 2D

LSD Class

Mod 5C

LSD Class

Mod 5C

LSD 44

Mod 5C

Equipment Description FY15 FY15 FY15 FY15 FY16 FY16 FY17 FY17

Electronic Equipment Cabinet (EEE) (Left)

SA-2811/U

Drawing # 8501280-1 (LSD) and 8501280-

2 (CVN)

8 1 1 1 1

Electronic Equipment Cabinet (EEE) (Right)

SA-2811A/U

Drawing # 8501295-1 (LSD) and 8501295- 2 (CVN), with 8600946 (FC1)

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U with CIWS Simulator Drawing # 8501295-1 (LSD) and 8501295-

2 (CVN)

8 1 1 1 1

Power Temperature Control (PTC) for Advanced Computer Enclosure (ACE) Remote Computer Equipment Module

(CEM) OL-794/U

Drawing # 8501483

6 3 1 1

Hotel Solution Drawing # 8600840

6 21 10 10 10

Mini-I/O Signal Data Converter Group OU-

184(V) 1 CVN

Drawing # 8504396-1 (LSD) and

8504396-2 (CVN)

Mini-I/O Signal Data Converter Group OU-

184(V) 2 CVN RTE GFE

Drawing # 8504397-1 (LSD) and

8504397-2 (CVN)

Mini-I/O Signal Data Converter Group OU-

184(V) 3 CVN RTE GFE

Drawing # 8504398-1 (LSD) and

8504398-2 (CVN)

8 1 1

Mini-I/O Signal Data Converter Group OU- 184(V) 4 CVN RTE GFE Drawing # 8504399-1 (LSD) and 8504399-2 (CVN)

8 1 1 1 1 1

Mini-I/O Signal Data Converter Group OU-

184(V) 5 LSD RTE GFE

Drawing # 8504443-1 (LSD) and

8504443-2 (CVN)

8 1 1 1

Multipurpose Enclosure (MPE) CV-4437/F Type A/E Drawing # 8578278-1 (LSD) and 8578278-

6 1 1

Note: Delivery Order 0001 shall consist of the following:

Electronic Equipment Cabinet (EEE) (Left) SA-2811/U, Quantity 1 each

Mini-I/O Signal Data Converter Group OU-184(V) 5 LSD, Quantity 1 each

Multipurpose Enclosure (MPE) CV-4437/C Ethernet to Ethernet, Quantity 1 each

Multipurpose Enclosure (MPE) CV-4437/E IRIS (IRIS Card Set is GFE), Quantity 1 each

Uninterrupted Power Source (UPS) Rack (440VAC) PP-8588/U CPS UPS Rack, Quantity 1 each

4.6 MANDATORY REQUIREMENTS

The following requirements are mandatory and must be met prior to award of a contract, as well as maintained throughout the period of performance:

Requirement 1: The contractor must be a U.S. owned business with a facility located within the continental Unites States.

Requirement 2: All personnel performing tasks under this contract must be United States citizens

Requirement 3: The contractor must be a current DoD contractor and hold an active Joint Certification

Program (JCP) certification with the Logistics Information Service

Requirement 4: The contractor must be ISO 9001 Certified and provide Certification number.

4.7 SECURITY GUIDANCE

As referenced in the DD Form 254, For Official Use Only (FOUO) information shall be protected per DoD 5200.1

Vol 4. It is emphasized that FOUO information may not be transmitted via unprotected systems, e.g., the Internet, unless fully encrypted to the current DoD Standard 5200.1, Volume 4.

DIGITAL DELIVERY OF DATA

(a) Delivery by the Contractor to the Government of certain technical data and other information is now frequently required to be made in digital form rather than in hardcopy form. The method of delivery of such data and/or other information (i.e., in electronic, digital, paper hardcopy, or other form) shall not be deemed to affect in any way either the identity of the information (i.e., as “technical data” or “computer software”) or the Government’s and the Contractor’s respective rights therein.

(b) Whenever technical data and/or computer software deliverables required by this contract are to be delivered in digital form, any authorized, required, or permitted markings relating to the Government’s rights in and to such technical data and/or computer software must also be digitally included as part of the deliverable and on or in the same medium used to deliver the technical data and/or software. Such markings must be clearly associated with the corresponding technical data and/or computer software to which the markings

2 (CVN)

Multipurpose Enclosure (MPE) CV-4437/C Ethernet to Ethernet Drawing # 8578275-1 (LSD) and 8578275-

2 (CVN)

6 3 2 2 2

Multipurpose Enclosure (MPE) CV-4437/E IRIS Drawing # 8578277-1 (LSD) and 8578277-2 (CVN)

6 3 3 3

Uninterrupted Power Source (UPS) Rack (440VAC) PP-8588/U CPS UPS Rack Drawing # 8600787

8 2 2 2 2 2 2 2 2

Uninterrupted Power Source (UPS) Rack (115VAC) PP-8580/U Indicate CDS Drawing # 8600788

8 2

Boundary Defense Cabinet (BDC), Nomenclature pending Drawing # 8601114-000 OL-798(V)(2)

8 2 2 2 2 2 2 2 2 relate and must be included in such a way that the marking(s) appear in human-readable form when the technical data and/or software is accessed and/or used. Such markings must also be applied in conspicuous human-readable form on a visible portion of any physical medium used to effect delivery of the technical data and/or computer software. Nothing in this paragraph shall replace or relieve the Contractor’s obligations with respect to requirements for marking technical data and/or computer software that are imposed by other applicable clauses such as, where applicable and without limitation, DFARS 252.227-

7013 and/or DFARS 252.227-7014.

(c) Digital delivery means (such as but not limited to Internet tools, websites, shared networks, and the like) sometimes require, as a condition for access to and/or use of the means, an agreement by a user to certain terms, agreements, or other restrictions such as but not limited to “Terms of Use,” licenses, or other restrictions intended to be applicable to the information being delivered via the digital delivery means. The

Contractor expressly acknowledges that, with respect to deliverables made according to this contract, no such terms, agreements, or other restrictions shall be applicable to or enforceable with respect to such deliverables unless such terms, agreements, or other restrictions expressly have been accepted in writing by the Contracting Officer; otherwise, the Government’s rights in and to such deliverables shall be governed exclusively by the terms of this contract.

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

The following have been modified:

Ddl-L31 COST PROPOSAL – SPECIFIC REQUIREMENTS – COMPLEX SUPPLIES/R&D ITEMS

The cost proposal must provide breakdowns for the following basic price and/or cost elements, as applicable:

(a) This proposal shall contain Firm Fixed Pricing (FFP) as stated in Section B to establish a contract ceiling value under CLIN 0001. The offeror shall provide as a part of their cost proposal the summed value of each piece of equipment times the quantity as identified in the chart below per fiscal year. The summed total value for

FY 14, FY15, FY16 and FY17 (all equipment quantities for the entire period of performance) shall equal the established contract ceiling value (CLIN 0001). See chart below:

Note: Requests for Technical Data Packages (TDP's) shall be sent electronically to Theresa Ashton-Moore at: theresa.ashton-moore@navy.mil or faxed to (540) 653-6810, Attn: Theresa Ashton-Moore. The TDP's will be restricted to current DoD and DoD contractor's only. Each interested DoD contractor must hold an active Joint

Certification Program (JCP) certification with the Logistics Information Service. Additional information regarding obtaining JCP certification can be found at: http://www.dlis.dla.mil/jcp. Along with the request to receive the technical data package, interested parties should also provide the company's address, telephone number, POC and provide the company’s CAGE Code, DUNS number or JCP Certification Number, as well as the DoD contract number for which the company currently holds an active DoD contract. Requests for TDP's should be submitted not later than April 1, 2014 to allow potential offeror’s adequate time for proposal preparation and timely submission prior to the proposal response due date. It is not the Government’s intent to grant extensions to the proposal response due date as a result of untimely request/receipt of the TDP’s. The TDP's include data restricted by the

Arms Export Control Act.

mailto:theresa.ashton-moore@navy.mil http://www.dlis.dla.mil/jcp

FY2014

LSD 45

LSD 47

Mod 5C

ICSTF

Mod 5C

LSD 51

Mod 5C

SDTS

Mod 5C

LPD 23

Mod 2D

CVN 77

Mod 1D

CVN 70

Mod 1D

SSDS

Mk ½

ICSTD

SSDS

Mk2

Mod

1D/2D

WI

Mod

1D/2D

LSD 43

Total

Price

Equipment Description FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14 FY14

Electronic Equipment Cabinet (EEE) (Left) SA-2811/U

1 1 1 1 1 1 1 $

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U

1 $

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U with CIWS Simulator

1 1 1 1 1 1 $

Power Temperature Control (PTC) for Advanced Computer Enclosure (ACE) Remote Computer Equipment Module

(CEM) OL-794/U

1 1 1 1 1 5 1 $

Hotel Solution 10 21 21 10 8 8 $

Mini-I/O Signal Data Converter Group

OU-184(V) 1 CVN

Mini-I/O Signal Data Converter Group

OU-184(V) 2 CVN RTE GFE

Mini-I/O Signal Data Converter Group

OU-184(V) 3 CVN RTE GFE

1 1 1 1 1 $

Mini-I/O Signal Data Converter Group

OU-184(V) 4 CVN RTE GFE

1 1 1 1 1 1 $

Mini-I/O Signal Data Converter Group

OU-184(V) 5 LSD RTE GFE

1 1 1 1 1 1 $

Multipurpose Enclosure (MPE) CV- 4437/F Type A/E

1 1 1 1 1 $

Multipurpose Enclosure (MPE) CV- 4437/C Ethernet to Ethernet

2 2 2 2 2 3 3 3 3 3 2 $

Multipurpose Enclosure (MPE) CV-

4437/E IRIS

3 3 3 3 3 3 $

Uninterrupted Power Source (UPS) Rack (440VAC) PP-8588/U CPS UPS Rack

2 2 2 2 2 2 2 2 2 2 2 2 $

Uninterrupted Power Source (UPS) Rack (115VAC) PP-8580/U Indicate

CDS

3 $

Boundary Defense Cabinet (BDC), Nomenclature pending

2 2 2 2 2 2 2 2 2 2 2 2 $

TOTAL SUMMED VALUE FOR FY14: $

FY2015

CVN 74

Mod 1D

LPD 18

Mod 2D

LPD 19

Mod 2D

LHD 2

Mod 3C

Total

Price

Equipment Description FY15 FY15 FY15 FY15

Electronic Equipment Cabinet (EEE) (Left)

SA-2811/U

0 1 $

Electronic Equipment Cabinet (EEE) (Right)

SA-2811A/U

0 $

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U with CIWS

0 1 $

Power Temperature Control (PTC) for Advanced Computer Enclosure (ACE)

Remote Computer Equipment Module (CEM) Ol-794/U

0 3 $

Hotel Solution 21 10 10 $

Mini-I/O Signal Data Converter Group OU-

184(V) 1 CVN

0 $

Mini-I/O Signal Data Converter Group OU-

184(V) 2 CVN RTE GFE

0 $

Mini-I/O Signal Data Converter Group OU-

184(V) 3 CVN RTE GFE

1 1 $

Mini-I/O Signal Data Converter Group OU-

184(V) 4 CVN RTE GFE

1 1 1 1 $

Mini-I/O Signal Data Converter Group OU-

184(V) 5 LSD RTE GFE

0 $

Multipurpose Enclosure (MPE) CV-4437/F Type A/E

1 1 $

Multipurpose Enclosure (MPE) CV-4437/C Ethernet to Ethernet

3 $

Multipurpose Enclosure (MPE) CV-4437/E

IRIS

0 $

Uninterrupted Power Source (UPS) Rack (440VAC) PP-8588/U CPS UPS Rack

2 2 2 2 $

Uninterrupted Power Source (UPS) Rack (115VAC) PP-8580/U Indicate CDS

0 2 $

Boundary Defense Cabinet (BDC), Nomenclature pending

2 2 2 2 $

TOTAL SUMMED VALUE FOR FY15: $

FY2016

LPD Class Mod 2D

LSD Class Mod 5C

Total Price

Equipment Description FY16 FY16 $

Electronic Equipment Cabinet (EEE) (Left)

SA-2811/U

1 $

Electronic Equipment Cabinet (EEE) (Right)

SA-2811A/U

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U with CIWS

1 $

Power Temperature Control (PTC) for Advanced Computer Enclosure (ACE)

Remote Computer Equipment Module (CEM) Ol-794/U

1 $

Hotel Solution 10 $

Mini-I/O Signal Data Converter Group OU-

184(V) 1 CVN

Mini-I/O Signal Data Converter Group OU-

184(V) 2 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-

184(V) 3 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-

184(V) 4 CVN RTE GFE

1 $

Mini-I/O Signal Data Converter Group OU-

184(V) 5 LSD RTE GFE

1 $

Multipurpose Enclosure (MPE) CV-4437/F Type A/E

Multipurpose Enclosure (MPE) CV-4437/C Ethernet to Ethernet

2 $

Multipurpose Enclosure (MPE) CV-4437/E

IRIS

3 $

Uninterrupted Power Source (UPS) Rack

(440VAC) PP-8588/U CPS UPS Rack

2 2 $

Uninterrupted Power Source (UPS) Rack (115VAC) PP-8580/U Indicate CDS

Boundary Defense Cabinet (BDC), Nomenclature pending

2 2 $

TOTAL SUMMED VALUE FOR FY16: $

FY2017

(b) Purchased/Subcontracted Materials and Services. Provide a consolidated priced summary of individual material quantities included in the various tasks, orders, or contract line items being proposed and the basis for pricing (vendor quotes, invoice prices, etc.). Include raw materials, parts, components, assemblies, and services to be produced or performed by others. For all items proposed, identify the item and show the source, quantity, and price. Conduct price analyses of all subcontractor proposals. Conduct cost analyses for all subcontracts when cost or pricing data are submitted by the subcontractor. Include these analyses as part of your own cost proposal submissions. Submit the subcontractor cost or pricing data as part of your own cost or pricing data. These requirements also apply to all subcontractors if required to submit cost or pricing data.

(1) Adequate Price Competition. Provide data showing the degree of competition and the basis for establishing the source and reasonableness of price for those acquisitions (such as subcontracts, purchase orders, material order, etc.) priced on the basis of adequate price competition. For interorganizational transfers priced at other than the cost of comparable competitive commercial work of the division, subsidiary, or affiliate of the contractor, explain the pricing method (see FAR 31.205-26(e)).

LSD Class

LSD 44

Mod 5C

Total Price

Equipment Description FY17 FY17

Electronic Equipment Cabinet (EEE) (Left)

SA-2811/U

1 1 $

Electronic Equipment Cabinet (EEE) (Right)

SA-2811A/U

Electronic Equipment Cabinet (EEE) (Right) SA-2811A/U with CIWS

1 1 $

Power Temperature Control (PTC) for Advanced Computer Enclosure (ACE)

Remote Computer Equipment Module (CEM) Ol-794/U

1 $

Hotel Solution $

Mini-I/O Signal Data Converter Group OU-

184(V) 1 CVN

Mini-I/O Signal Data Converter Group OU-

184(V) 2 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-

184(V) 3 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-

184(V) 4 CVN RTE GFE

Mini-I/O Signal Data Converter Group OU-

184(V) 5 LSD RTE GFE

1 1 $

Multipurpose Enclosure (MPE) CV-4437/F Type A/E

Multipurpose Enclosure (MPE) CV-4437/C Ethernet to Ethernet

2 2 $

Multipurpose Enclosure (MPE) CV-4437/E

IRIS

3 3 $

Uninterrupted Power Source (UPS) Rack (440VAC) PP-8588/U CPS UPS Rack

2 2 $

Uninterrupted Power Source (UPS) Rack (115VAC) PP-8580/U Indicate CDS

Boundary Defense Cabinet (BDC), Nomenclature pending

2 2 $

TOTAL SUMMED VALUE FOR FY17: $

(2) All Other. Provide data showing the basis for establishing source and reasonableness of price.

In addition, provide a summary of your cost analysis and a copy of cost or pricing data submitted by the prospective source in support of each subcontract, or purchase order. For standard commercial items fabricated by the offeror that are generally stocked in inventory, provide a separate cost breakdown, if priced based on cost. For interorganizational transfers priced at cost, provide a separate breakdown of cost elements. Analyze the cost or pricing data and submit the results of your analysis of the prospective source's proposal. When submission of a prospective source's cost or pricing data is required as described in this paragraph, it must be included along with your own cost or pricing data submission, as part of your own cost or pricing data. You must also submit any other cost or pricing data obtained from a subcontractor, either actually or by specific identification, along with the results of any analysis performed on that data.

(End of Summary of Changes)