1030-5802B.pdf

NOTES: UNLESS OTHERWISE SPECIFIED

1. ADHERE FN 2 TO FN 1 USING FN 3 PER FN 4.

TRIM FN 2 TO MATCH ASSOCIATED FEATURES OF FN 1.

EXISTING THRU HOLES AND INTERNAL THREADS SHALL BE FREE FROM FN 2 AND FN 3. MASK PISTON ASSEMBLY DURING CORK BONDING.

PERMANENTLY MARK PART NUMBER AND SERIAL NUMBER APPROXIMATELY WHERE SHOWN. METHOD OPTIONAL.

5. ALL SHARP EDGES OF FN 2 ARE TO HAVE A MAX RADII OF .06.

6. CORK IDENTIFIED BY HASHED AREAS.

7. PICTORAL REPRESENTATION OF CORK MAY NOT MATCH ACTUAL.

CHAMFER AREAS APPROXIMATELY AS SHOWN.

- REL PER ECN-0000014532 2004-11-15 JS

A REV PER ECN-0000003686 SJ 2006-02-08 JS

B REV PER ECN-0000129276 CEK 2021-05-24 SAV

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

UNLESS OTHERWISE SPECIFIED

SIZE CAGE CODE DRAWING NO. REV

E 27555 1030-5802 B

CONTRACT NUMBER

N00019-00-C-0255

DRAWN BY DATE

M. WESOLEK 2004-11-11

CHECKED BY DATE

R. BOASE 2004-11-12

APPROVED BY DATE

J. SUMMERS 2004-11-03

APPROVED BY DATE

D. RATYNSKI 2004-11-04

APPROVED BY DATE

K. MURRY 2004-11-11

NORTHROP GRUMMAN SPACE SYSTEMS

ORBITAL SCIENCES LLC

1575 SOUTH PRICE ROAD

CHANDLER, ARIZONA 85286

TITLE

RELEASE HOUSING ASSY W/TPS

SCALE: 2/1 WEIGHT: - SHEET: 1 OF 1

1. INTERPRET DIMENSIONS AND

TOLERANCES PER ASME

Y14.5-2009.

2. INTERPRET DRAWING PER ASME

Y14.100.

3. DIMENSIONS ARE IN INCHES.

4. DIMENSIONS APPLY AFTER

PLATING OR COATING.

5. DIMENSIONS APPLY BEFORE

PAINTING.

6. REMOVE ALL BURRS AND SHARP

EDGES,.005 -.025.

7. INTERNAL MACHINED RADII

.03 MAX.

8. SURFACE TEXTURE:

TOLERANCES ON DECIMAL DIMENSIONS:

.XXX .010

.XX .02

.X .1

TOLERANCES ON ANGULAR DIMENSIONS:

MACHINED .5

LOCATING .5

CHAMFERS 5

FORMED 1

TOLERANCE: ALL HOLE DIA

FROM - THRU TOL

.000 - .125 +.004 -.001

.126 - .250 +.005 -.001

.251 - .500 +.006 -.001

.501 - .750 +.008 -.001

.751 - 1.000 +.010 -.001

1.001 - 2.000 +.012 -.001

OVER 2.000

+.015 -.005

THIRD ANGLE PROJECTION

1030-5802-001 1030-5016

PART NUMBER NEXT ASSY

APPLICATION

PRELIMINARY

NOT FOR PRODUCTION

SEE SEPARATE PARTS LIST

A

A

B

B

C

C

D

D

E

E

F

F

G

G

H

H

WARNING: THIS DOCUMENT/SOFTWARE CONTAINS TECHNICAL DATA/SOFTWARE WHOSE EXPORT

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22 U.S.C. SECTION 2751 ET.

SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50 U.S.C. APP

2401 ET SEQ.). VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL

PENALTIES. DISSEMINATION IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: FOR CLASSIFIED DOCUMENTS, FOLLOW THE PROCEDURES IN DOD

5220.22-M, NISP OPERATING MANUAL OR DOD 5200.01, DOD INFORMATION SECURITY PROGRAM.

FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF

DEFENSE AND U.S. DOD CONTRACTORS ONLY ADMINISTRATIVE OR OPERATIONAL USE 12

DECEMBER 2019. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO COMMANDER,

NAVAL AIR SYSTEMS COMMAND, PMA-208, 48195 SHAW ROAD, B2807, PATUXENT RIVER,

MD 20670.

( ).250-28 UNF-2B3X

4 FS

REF

2X

2X

ISO VIEW

FOR REFERENCE ONLY