14RJN04_0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The reason for this amendment is to extend the closing date to 20 May 2014 and dissolve the small business set-aside. This amendment also deletes CLINs 0012, 0013 and adds CLINs 0018, 0019, 0020, 0021. See page 2 for details.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 19

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Mar-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00164-14-R-JN04

X 9B. DATED (SEE ITEM 11)

18-Oct-2013

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Mar-2014

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

K. FRENTZ (812-854-5928)

BLDG 3422

300 HIGHWAY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00164-14-R-JN04

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 20-Dec-2013 03:00 PM to 20-May-2014 02:00 PM.

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0018

This CLIN has been renumbered to CLIN 0022.

CLIN 0019

This CLIN has been renumbered to CLIN 0023.

CLIN 0018 is added as follows:

ITEM NO SUPPLIES/SERVICES QTY U/I UNIT PRICE AMOUNT

0018 MiniGun GCU A1

Reference Drawings: 7308248 REV B, 7308249 REV B, 7308250 REV B, 7308251

REV B, 7308252 REV B, 7308253 REV B,

7308254 REV B, 7308255 REV B, 7308256

REV B, 7308257 REV B, 7308258 REV B,

7308259 REV B, 7308260 REV B, 7308261

REV B, 7308263 REV B, 7308264 REV B,

7308265 REV C, 7308266 REV C, 7308267

REV B, 7308268 REV B, 7308269 REV B,

7308270 REV B, 7308278 REV B, 7308280

REV B, GUN Control A1 Gerbers.zip

Each

FOB: Destination

FFP

CLIN 0019 is added as follows:

0019 MiniGun GCU A2

Reference Drawings: 7308281 REV B, 7308255 REV B, 7308256 REV B, 7308258

REV B, 7308259 REV B, 7308261 REV B,

7308265 REV C, 7308268 REV B, 7308270

REV B, 7308278 REV B, 7308280 REV B,

7308282 REV B, 7308283 REV B, 7308284

REV B, 7308285 REV B, 7308286 REV B,

7308287 REV B, 7308288 REV B, 7308289

REV B, 7308290 REV B, 7308291 REV B,

7308292 REV B, 7308295 REV C, GUN

Control A2 Gerbers.zip

CLIN 0020 is added as follows:

0020 MiniGun GCU A3

Reference Drawings: 7308293 REV B, 7308294 REVB, Gun Control A3 Gerbers.zip

CLIN 0021 is added as follows:

0021 MiniGun GCU A4

Reference Drawings: 7308245 REV C, 7308246 REV C, WL_7308247, 7308247 REV

C, 7308295 REV C, 7308296 REV C, 7308297

REV C, 7379686 REV B

The following have been modified:

PRICE MATRICES

NOTE: Offerors may propose different quantity/price brk points than those listed below, and are encouraged to do so, if it will facilitate optimal pricing. Any such proposal should cover a range that commences at the Delivery Order Minimum and ends at the Delivery Order Maximum. Yr 1 is the date of contract award through one yr after contract award. This is a five-yr Indefinite Delivery/Indefinite Quantity (IDIQ) contract.

CLIN 0001 PRICING MATRIX - Over Voltage Protection CCA

Quantity Year 1 Year 2 Year 3 Year 4 Year 5 1 – 50 Each

51 – 100 Each

101 – 200 Each

201 – 300 Each

301 – 500 + Each

CLIN 0002 PRICING MATRIX - GCU Control Board CCA

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0003 PRICING MATRIX - High Voltage Power Supply CCA

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0004 PRICING MATRIX - CCA, Booster Motor

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0005 PRICING MATRIX - CCA, Power Supply

51 – 100 Each

101 – 200 Each

CLIN 0006 PRICING MATRIX - CCA, GCP Motherboard

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0007 PRICING MATRIX - CCA, GCP Display

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0008 PRICING MATRIX - CCA, Rocket Control Unit

51 – 100 Each

101 – 200 Each

CLIN 0014 PRICING MATRIX - IUADP Interface

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0015 PRICING MATRIX - IUADP Microcontroller

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0016 PRICING MATRIX - IUADP Motherboard

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0017 PRICING MATRIX - IUADP Power Supply

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0018 PRICING MATRIX – MiniGun GCU A1

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0019 PRICING MATRIX - MiniGun GCU A2

51 – 100 Each

101 – 200 Each

CLIN 0020 PRICING MATRIX - MiniGun GCU A3

51 – 100 Each

101 – 200 Each

201 – 300 Each

CLIN 0021 PRICING MATRIX - MiniGun GCU A4

51 – 100 Each

101 – 200 Each

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

SOW

STATEMENT OF WORK

FOR THE MANUFACTURE OF

Circuit Card Assemblies (CCA’s)

1.0 SCOPE. This Statement of Work (SOW) sets forth requirements for the efforts required to manufacture, test, inspect, package and deliver Circuit Card Assemblies (CCA’s). CCA’s will be built in accordance with (IAW) government drawings and Part list.

1.1 Background. These CCA’s will be used for Armed Helo Weapons Systems and various ground and air activities in support of the United States Navy, and United States Air Force and other Department of Defense, Department of Homeland Security efforts as required. The contract performance requirements are based on but not limited to CCA’s in support of Fixed Forward Firing Weapons, (FFW) Aircraft Gun Unit (GAU 21), Common Aviation Command and Control system (CAC2S), Mobile Tactical Air Operations Module (MTAOM), and Interface Unit Automatic Data Processor (IUADP) and yet to be determined CCA’s within the NSWC Crane.

2.0 APPLICABLE DOCUMENTS.

2.1 Government Documents. The following documents form a part of the SOW to the extent specified herein. In the event of a conflict between the documents reference herein and the contents of this SOW, the contents of this SOW shall prevail.

2.1.1 Specifications, Standards and Handbooks. The following specifications, standards and handbooks form a part of this document to the extent specified herein.

STANDARDS

MILITARY

MIL-STD-130N (1) (11/16/2012) Identification Marking of US Military Property MIL-STD-1686REVC (10/25/1995) Electrostatic Discharge Control Program MIL-PRF-31032 (5/16/2012) Printed Circuit Board/Printed Wiring board general Specifications for.

MIL-HDBK-263B (07/31/1994) Electrostatic Discharge Control Handbook for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) (Metric)

MIL-HDBK-773A (06/30/2005) Electrostatic Discharge Protective Packaging

INTERNATIONAL IPC STANDARDS

IPC-6011 (7/1996) Generic Performance Specification for Printed Boards IPC-6012 7/2007B7 (7/2007) Qualification and Performance Specification for Rigid Printed Boards

Class 3 IPC-2221A (2/1998) Generic Standard of Printed Circuit Board Design IPC-A-610REV E (04/2010) Acceptability of Electronic Assemblies ISO-9001 (2008) Quality Management Systems J –STD-001 (class III 04/2010) Requirements for Soldered Electronics J-STD-004A (01/2004) “Soldering Fluxes Requirements for” and electrical assemblies J-STD-005 (01/1995) “Soldering Paste Requirements for” J-STD-006 (10/2008) “Electronic Grad Solder Alloys and Fluxed and Non Fluxed Solid

Solders for Electronic Soldering Applications for" J-STD-033C (02/01/2012) Handling, Packing, Shipping and use of moisture/reflow sensitive surface mount devices J-STD-020D (03/01/2008) Moisture/Reflow Sensitivity Classification for Nonthermic Solid State

Surface Mount Devices

DEPARTMENT OF DEFENSE (DOD)

(Copies of specifications and standards required by suppliers in connection with specific procurement functions should be obtained from Commanding Officer, Document Automation and Production Service, Building 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, if not available, advise contracting activity. World Wide Web Address: http://quicksearch.dla.mil/index.cfm

2.1.2 Other Government Documents, Drawings and Publications. The following other Government documents, drawings, parts lists, publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues shall be those in effect on the date of the solicitation.

DRAWINGS

NAVAL SEA SYSTEMS COMMAND DRAWINGS

2.1.3 Drawings, Gerber Files, and Parts lists provided but are not limited to the following

The complete Drawing Package can be found in Section J of this solicitation.

Master Dwg # Master Dwg nomenclature

3392AS1841 Over Voltage Protection CCA

3392AS1852 GCU Control Board CCA

3392AS1913 H.V Power Supply Circuit Card Assy

3392AS1861 Circuit Card Assembly, Booster Motor

3392AS1822 Circuit Card Assembly, Power Supply

3392AS1824 Circuit Card Assembly, GCP Motherboard

3392AS1834 Circuit Card Assy, GCP Display

3392AS2433 CCA, Rocket Control Assy

3392AS2530 IUADP Interface

3392AS2510 IUADP Microcontroller

3392AS2550 IUADP Motherboard

3392AS2520 IUADP Power Supply

7308248 MiniGun GCU A1

7308281 MiniGun GCU A2

7308293 MiniGun GCU A3

7308245 MiniGun GCU A4

(Copies of other Government documents, drawings and publications required by the suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the Contracting Officer).

2.2 Non Government Publications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents, which are DOD adopted, are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation.

ANSI/ASQC A8402-1994 QUALITY MANAGEMENT AND QUALITY

ASSURANCE - VOCABULARY

(Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1137).

2.3 Updating Specifications and Standards. If, during the performance of this contract, the contractor believes that the contract contains outdated or different versions of any specification or standard, the contractor may request that all of its contracts be updated to include the current version of the applicable specification or standard. Updating shall not affect the form, fit or function of the deliverable item or increase cost/price of the item to the Government. The contractor should submit an updated request to the Contracting Officer for approval. The contractor shall perform the contract in accordance with the existing specifications and standards until notified of approval/disapproval by the Contracting Officer. Any approved alternate specifications or standards will be incorporated into the contract.

3.0 REQUIREMENTS.

3.1 General. The Contractor shall procure all parts and materials and provide the qualified personnel and facilities necessary to fabricate, inspect, test and package Circuit Card Assemblies set forth in the Performance Specification, the Technical Data Package (TDP) and the contract.

3.2 Configuration Management (CM). A CM Program is necessary for the completion of the effort. The contractor shall establish and maintain configuration control on all components used throughout production of the end items in accordance with the contract, the TDP and the drawing specifications.

3.3 Contractor Performed Lot Acceptance Testing (LAT). The Contractor shall submit an Inspection and Test Plan (I&TP) in accordance with Contract Data Requirements List (CDRL) CDRL A001. The I&TP will document the contractor plans in complying with the LAT requirements. The Contractor shall submit a

Test/Inspection Report (T/IR) for each lot and each partial lot of circuit cards (CCA’s) delivered under this contract. The T/IR shall be generated and distributed in accordance with CDRL A002.

3.4 Drawings. Any change to the TDP or specification that does affect form, fit, function or safety shall require the submission of a Class I ECP to the Government for review and approval in accordance with CDRL A003. To correct errors in the TDP or specification, or to implement a change that does not affect form, fit, function or safety, the contractor may generate a Class II Engineering Change Proposal (ECP) for submission to the Government for review and approval in accordance with CDRL A004. If the Contractor considers it necessary to temporarily depart from the mandatory requirements of the specification or drawings, the Contractor may request that a deviation be authorized. Any deviation from the TDP or specification shall be submitted to the Government for review and approval. The contractor shall submit a Request for Deviation to the Government IAW CDRL A005

3.5 Failed initial test or warranty items. Upon receipt of rejected assest(s) vendor will provide a Return Material Authorization number (RMA#) for shipment of rejected asset(s) Vendor will provide a failure analysis report DD FM 1664 IAW CDRL A006.

3.6 Counterfeit Parts and Materials.

3.6.1 The Contractor shall implement procedures to minimize the risk of procuring and/or using counterfeit parts and materials. Counterfeit electronic parts may typically be used parts which have been refurbished and represented as new. These parts may or may not contain authentic die, and will often pass most if not all of the system performance requirements and data sheet parameters. However, the part reliability may have been compromised during removal, handling, or remarking, and a reduced life can be expected. Commonly, counterfeited electronic parts include expensive parts such as microcontrollers or specially-screened devices or common parts which have several pin-compatible versions from multiple, Original Component Manufacturers (OCM), such as memory devices and operational amplifiers.

Counterfeit mechanical parts are typically improperly made, marked, or treated products. Examples are improper anodizations or heat treatments (or falsified data), mismarked parts sold as a higher grade steel, or used/bogus parts such as valves or circuit breakers. As with electronic parts, counterfeit mechanical parts are significantly more likely to fail prior to the part's expected life.

3.6.2 Solicitations and subcontracts for all suppliers shall contain a requirement for procedures to minimize the risk of procuring and/or using counterfeit parts and materials.

3.6.3 Preventing Counterfeit Parts and Materials. The Contractor shall take steps as defined below to minimize the risk of receiving counterfeit parts and materials. The Contractor:

3.6.3.1 Shall maximize availability of authentic, originally designed and/or qualified parts throughout the product's life cycle, including management of parts obsolescence.

3.6.3.2 Shall assess potential sources of supply to minimize the risk of receiving counterfeit parts or materials.

3.6.3.3 Shall maintain a listing of approved suppliers with documented criteria for approval and removal of suppliers from the list.

3.6.3.4 Shall have purchasing procedures which require the selection of parts and materials from OCM or authorized suppliers whenever possible.

3.6.3.5 Shall require a certificate of compliance and supply chain traceability for all electronic part purchases.

3.6.3.6 Shall use Government or industry services such as Government-Industry Data Exchange Program (GIDEP) and other commercially available services to identify part or supplier quality or authenticity problems.

3.6.3.7 Shall define minimum inspection and test requirements for parts being procured from unauthorized sources, and shall ensure that in-house, third-party, and/or distributor inspection and test procedures and facilities comply with these requirements.

3.6.3.8 Shall incorporate procurement clauses which plainly identify quality requirements and liability to all approved suppliers.

3.6.3.9 Shall flow the requirements above to affected subcontractors.

3.7 Early Delivery. The delivery schedule for each delivery order placed on the IDIQ (Indefinite Delivery, Indefinite Quantity) contract shall be agreed upon between the Government and the Contractor prior to the delivery order being signed. The delivery schedule shall take into consideration current production status of the item being procured, the quantity of the delivery order and production capability.

3.8 Packaging and Shipping. All deliverables containing CCA’s shall be packed, shipped and handled IAW MIL-HDBK-263B and MIL-HDBK-773A Vendor shall supply all required packing and shipping materials.

SECTION E - INSPECTION AND ACCEPTANCE

The following Acceptance/Inspection Schedule was added for CLIN 0018:

INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

Destination Government Destination Government

The following Acceptance/Inspection Schedule was added for CLIN 0019:

The following Acceptance/Inspection Schedule was added for CLIN 0020:

The following Acceptance/Inspection Schedule was added for CLIN 0021:

SECTION F - DELIVERIES OR PERFORMANCE

52.211-8 TIME OF DELIVERY (JUN 1997)

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

Production Delivery on Order 0001: 90 days from order placement

Subsequent Production Delivery:

Within Days 45

After Date of Order at a rate of 255 per month for each CLIN

Item No. Quantity of Contract CLINs 0001 – 0021

CLIN 0022 will be delivered in accordance with DD 1423’s

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

Within Days

After Date

Item No. Quantity of Contract

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of clause)

SECTION I - CONTRACT CLAUSES

The following have been deleted:

52.219-4 Notice of Price Evaluation Preference for HUBZone Small

Business Concerns

JAN 2011

52.219-6 Notice Of Total Small Business Set-Aside NOV 2011 52.219-28 Post-Award Small Business Program Rerepresentation APR 2012

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

ATTACHMENTS

Drawing Package

CLIN Nomenclature Drawing No.

or Spec No.

Associated Drawings Drawing Date

Over Voltage Protection CCA

3392AS1841

3392AS1841 REV A

11‐Mar‐14

3392AS1898 20‐Dec‐12

3392AS1851 REV A 11‐Mar‐14

3392AS1839 REV A 6‐Sep‐13

3392AS1839‐2 Gerber Files 6‐Sep‐13

GCU Control Board CCA

3392AS1852

3392AS1852 REV B

PL 3392AS1852 REV B 11‐Mar‐14

3392AS1661 REV A 26‐Apr‐13

3392AS1853 REV A 11‐Mar‐14

3392AS1899 20‐Dec‐12

3392AS1854 20‐Dec‐12

3392AS1854‐2 Gerber Files 20‐Dec‐12

High Voltage Power Supply Circuit Card Assembly

3392AS1913

3392AS1913 REV A

PL 3392AS1913 REV A 11‐Mar‐14

3392AS1900 20‐Dec‐12

3392AS1914 REV A 11‐Mar‐14

3392AS1915 20‐Dec‐12

3392AS1915‐2 Gerber Files 20‐Dec‐12

Circuit Card Assembly, Booster Motor

3392AS1861

3392AS1861 REV A

20‐Dec‐12

PL 3392AS1861 REV A 11‐Mar‐14

3392AS1864 REV A 11‐Mar‐14

3392AS1865 11‐Mar‐14

3392AS1910 20‐Dec‐12

3392AS1862 20‐Dec‐12

3392AS1862‐3 Gerber Files 20‐Dec‐12

Circuit Card Assembly, Power Supply

3392AS1822

3392AS1822 REV B

PL 3392AS1822 REV B 11‐Mar‐14

3392AS1837 REV B 11‐Mar‐14

339AS1901 REV A 20‐May‐13

339AS2429 REV A 26‐Apr‐13

PL 339AS2429 REV A 26‐Apr‐13

3392AS1821 REV B 11‐Mar‐14

3392AS1821‐4 Gerber Files 20‐Dec‐12

Circuit Card Assembly, GCP Motherboard

3392AS1824

3392AS1824 REV C

PL3392AS1824 REV C 11‐Mar‐14

3392AS1661 REV A 26‐Apr‐13

3392AS1838 REV B 11‐Mar‐14

3392AS1903 REV A 20‐May‐13

3392AS1823 REV A 26‐Apr‐13

3392AS1823‐3 Gerber Files 20‐Dec‐12

Circuit Card Assembly, GCP Display

3392AS1834

3392AS1834 REV B

PL3392AS1834 REV B 11‐Mar‐14

3392AS1836 REV B 11‐Mar‐14

3392AS1895 REV A 26‐Apr‐13

3392AS1833 REV B 11‐Mar‐14

3392AS1833 ‐ Gerber Files 26‐Apr‐13

Circuit Card Assembly, Rocket Control Unit

3392AS2433

3392AS2433 REV A

PL 3392AS2433 REV A 11‐Mar‐14

3392AS2417 26‐Apr‐13

3392AS2435 REV A 11‐Mar‐14

3392AS2434 26‐Apr‐13

3392AS2434‐4 Gerber Files 26‐Dec‐13

0009 Deleted

0010 Deleted

0011 Deleted

0012 Deleted

0013 Deleted

IUADP Interface

3392AS2530 REV 2

6‐Mar‐14

PL 3392AS2530 REV 2 6‐Mar‐14

3392AS2532 REV 2 6‐Mar‐14

3392AS2529 REV 2 6‐Mar‐14

3392AS2538 REV 1‐1 5‐Mar‐14

3392AS2539 REV 1‐1 5‐Mar‐14

3392AS2532‐3 (Gerber.zip) 6‐Mar‐14

IUADP Microcontroller

3392AS2510 REV 2

PL 3392AS2510 REV 2 6‐Mar‐14

3392AS2512 REV 2 6‐Mar‐14

3392AS2512‐3 (Gerber.zip) 6‐Mar‐14

IUADP Motherboard

3392AS2550 REV 2

PL 3392AS2550 REV 2 6‐Mar‐14

3392AS2552 REV 2 6‐Mar‐14

3392AS2554 REV 2 6‐Mar‐14

3392AS2555 REV 1‐1 5‐Mar‐14

3392AS2556 REV 1‐1 5‐Mar‐14

3392AS2552‐3 (Gerber.zip) 6‐Mar‐14

IUADP Power Supply

3392AS2520 REV 2

PL 3392AS2520 REV 2 6‐Mar‐14

3392AS2522 REV 2 6‐Mar‐14

3392AS2527 REV 2 6‐Mar‐14

3392AS2528 REV 2 6‐Mar‐14

3392AS2529 REV 2 6‐Mar‐14

3392AS2522‐3 (Gerber.zip) 6‐Mar‐14

MiniGun GCU A1

7308248

7308248 REV B

20‐Sep‐12

7308249 REV B 20‐Sep‐12

7308250 REV B 20‐Sep‐12

7308251 REV B 20‐Sep‐12

7308252 REV B 20‐Sep‐12

7308253 REV B 20‐Sep‐12

7308254 REV B 20‐Sep‐12

7308255 REV B 20‐Sep‐12

7308256 REV B 20‐Sep‐12

7308257 REV B 20‐Sep‐12

7308258 REV B 20‐Sep‐12

7308259 REV B 20‐Sep‐12

7308260 REV B 20‐Sep‐12

7308261 REV B 20‐Sep‐12

7308262 REV B 20‐Sep‐12

7308263 REV B 20‐Sep‐12

7308264 REV B 20‐Sep‐12

7308265 REV C 20‐Sep‐12

7308266 REV C 20‐Sep‐12

7308267 REV B 20‐Sep‐12

7308268 REV B 20‐Sep‐12

7308269 REV B 20‐Sep‐12

7308270 REV B 20‐Sep‐12

7308278 REV B 20‐Sep‐12

7308280 REV B 20‐Sep‐12

GUN Control A1 Gerbers.zip 6‐Apr‐09

MiniGun GCU A2

7308281

7308281 REV B

7308255 REV B 20‐Sep‐12

7308256 REV B 20‐Sep‐12

7308258 REV B 20‐Sep‐12

7308259 REV B 20‐Sep‐12

7308261 REV B 20‐Sep‐12

7308265 REV C 20‐Sep‐12

7308268 REV B 20‐Sep‐12

7308270 REV B 20‐Sep‐12

7308278 REVB 20‐Sep‐12

7308280 REV B 20‐Sep‐12

7308282 REV B 20‐Sep‐12

7308283 REV B 20‐Sep‐12

7308284 REV B 20‐Sep‐12

7308285 REV B 20‐Sep‐12

7308286 REV B 20‐Sep‐12

7308287 REV B 20‐Sep‐12

7308288 REV B 20‐Sep‐12

7308289 REV B 20‐Sep‐12

7308290 REV B 20‐Sep‐12

7308291 REV B 20‐Sep‐12

7308292 REV B 20‐Sep‐12

7308295 REV C 20‐Sep‐12

GUN Control A2 Gerbers.zip 6‐Apr‐09

MiniGun GCU A3

7308293

7308293 REV B

7308294 REV B 20‐Sep‐12

Gun Control A3 Gerbers.zip 6‐Apr‐09

MiniGun GCU A4

7308245

7308245 REV C

13‐Feb‐13

7308246 REV C 13‐Feb‐13

WL_7308247 26‐Oct‐98

7308247 REV C 6‐Mar‐13

7308295 REV C 20‐Sep‐12

7308296 REV C 20‐Sep‐12

7308297 REV C 13‐Feb‐13

7379686 REV B 20‐Sep‐12

Exhibit “A” – Contract Data Requirements List (CDRL) A001 Inspection and Test Plan 06 FEB 2013 1 A002 Test/Inspection Report 06 FEB 2013 1 A003 Engineering Change Proposal (ECP) –

Engineering Change Proposal (ECP) – Class I 06 FEB 2013 1 A004 Engineering Change Proposal (ECP) –

Engineering Change Proposal (ECP) – Class II 06 FEB 2013 1 A005 Request for Deviation (RFD) 06 FEB 2013 1 A006 Failure Analysis and Tracking Report –

Failure Reporting, Analysis, and Corrective Action System (FRACAS) 06 FEB 2013 1

A007 Failure Analysis and Corrective Action Report 06 FEB 2013 1

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND OTHER STATEMENTS OF OFFERORS

The following have been deleted:

52.204-5 Women-Owned Business (Other Than Small Business) MAY 1999 52.219-1 Alt I Small Business Program Representations (Apr 2012)

Alternate I

APR 2011

52.219-22 Small Disadvantaged Business Status OCT 1999

(End of Summary of Changes)