Attachments_1_-_3__13QQ505_Tables_-__Amendment_02.docx

Attachment 3: Delivery / Points of Contact For this procurement it is required that the tablets are preinstalled with Windows 7, 64-bit operating system. Windows 7, 64-bit is the only operating system that is currently approved by NAVSEA08 for use at the Naval Shipyards. Windows 8 is not yet approved for use at the Naval Shipyards.

Provide a tablet suite to meet all requirements listed below. The system shall include all specified software and accessories (e.g. cabling, power cords, etc) required for operation. All system components shall fully be compatible with one another. Attachments provide details for specified products.

Table 1:

with Digitizer Pen and at least one extra tablet battery (See Exhibit 1A for specifications)

(See Exhibit 1A -"Pointing Device" section for specifications)

Tablet carrying case (folio):

case opening allow access/use of ports, CAC, camera and other connections wraps 360 degrees around tablet transformable into a tablet stand

Must have at least two USB connections and US power

Stores a minimum of 5 tablets (but no Ethernet connection) Charges tablets (US Power)

Stores & Automatically connects a minimum of 5 tablets to network Charges tablet (US Power) Enables direct 10/100 Mbps remote connectivity

Minimum capacity of 3 tablet batteries (US Power)

Protective Film that is:

Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration Optically clear film 2H high surface hardness

with Digitizer Pen and at least one extra tablet battery (See Exhibit 1B for specifications)

Additional Item listed at bottom for Tablet B – CLIN 0035

(See Exhibit 1B -" Pointing Devices" section for specifications)

Tablet carrying case (folio):

case opening allow access/use of ports, CAC, camera and other connections wraps 360 degrees around tablet

Must have at least two USB connections and US power

Stores a minimum of 5 tablets (but no Ethernet connection) Charges tablets (US Power)

One battery for a single Tablet (US Power)

Protective Film that is:

Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration Optically clear film

with Pointing Device and if proposed tablet has removable battery provide one extra tablet battery (See Exhibit 1C for specifications)

(See Exhibit 1C - "Pointing Device" section for specifications)

Tablet carrying case (folio):

case opening allow access/use of ports, CAC, camera and other connections wraps 360 degrees around tablet

(If proposed tablet has removable battery)

(If proposed tablet has removable battery)

Protective Film that is:

Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration Optically clear film

with Pointing Device and if proposed tablet has removable battery provide one extra tablet battery (See Exhibit 1D for specifications)

(See Exhibit 1D - "Pointing Devices" section for specifications)

Tablet carrying case (folio):

case opening allow access/use of ports, CAC, camera and other connections wraps 360 degrees around tablet

(If proposed tablet has removable battery)

(If proposed tablet has removable battery)

Protective Film that is:

Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration Optically clear film

PC Wired Optical Mouse which includes 3 buttons USB connection Microsoft OS compatible

PC MS Win 7 Compatible Printer with USB std connection Battery and AC charger Lithium Battery Powered (minimum 2 hours or 200 pages per charge) and AC power/charger included Accommodates Legal and Letter Paper sizes Color and Black & White printing Ink Jet or better Print Medium

External wired USB Integrated touchpad US QWERTY, 88 key mobile tablet keyboard

USB to Ethernet 10/100Mbps adapter

Stores & Automatically connects a minimum of 5 tablets to network Charges tablet (US Power) Enables direct 10/100 Mbps remote connectivity

Total Price – ALL CLINS

Attachment 1 - Requirements

Tablet A - (with Integrated Handle, Digitizer Pen and at least one extra battery)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 3Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 128Gb Solid State Drive minimum

2.2 SDRAM: 8Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and charging

5.2 Docking Station Capable

5.3 Multi-Slot Docking Station Capable

6. Display

6.1 Screen Size (Diagonal) - 8.9” minimum to 10.5” maximum

6.2 Dual or Multi-touch

6.3 LED Backlit

6.4 Screen auto-rotates based on user orientation

6.5 Strengthened Glass Screen (e.g. Gorilla Glass® or equivalent)

7. Pointing Devices

7.1 Includes (1) Digitizer Pen. Device compatible, storable on or tethered to device, capability to support mouse over, at least one button (capable of performing right-click operation), replaceable pen tips and enabling hand written input on tablet.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range.

9. Battery

9.1 Lithium Ion Battery

9.2 Hot swappable

10. Audio

10.1 Speaker(s)

10.2 Headphone jack (If no headphone jack a 3.5mm jack to USB adapter is acceptable if included with tablet)

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12.1 Integrated Smart Card Reader (for DOD CAC) within tablet

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet will function after NAVSEA loads/configures the following Dept of Navy Required Software. Software versions mentioned are those currently approved for use.

14.1 Microsoft Windows 7 Enterprise

14.2 FIPS certified wireless supplicants (e.g. Juniper)

14.3 NAVSEA Provided Supplicant (e.g. Juniper) supports WPA2-Ent or xSec using DoD PKI

14.4 NAVSEA Provided Supplicant (e.g. Juniper) supports separate wired 802.1x profile (MSCHAPv2 PEAP) [Required for wired connected maintenance]

14.5 NAVSEA Provided Supplicant (e.g. Juniper) supports separate device and user authentication

14.6 Software for DoD PKI certificates

14.7 Symantec Endpoint Encryption (Framework + Full Disk + Removable Storage) v8.2

14.8 Installroot v3.1.5a

14.9 ActivClient v6.2

14.10 Desktop Validator v4.9.2

14.11 Group Policy Objects (GPOs) to enforce STIG/SRG policies

14.12 Patches for all IAVAs + Retina scans

14.13 DoD Host Based Security System (HBSS) Suite Of Tools (All products + VSE v8.8)

14.14 Required device control (McAfee HDLP Device control)

14.15 Odyssey client FIPS (802.1x supplicant) v5.4

14.16 McAfee v4.5.0 anti-virus software

15. Ruggedized IAW:

15.1 Moisture intrusion standards such as IEC 60529 IP 52/53/54 (or equivalent military standard)

15.2 Drop Tested standard such as MIL-STD-810G Method 516 (or equivalent international standard)

16. Bar-code Reader (Integrated in tablet case and capable of reading linear/1D (one-dimensional) and 2D bar code label types).

17. 13.56 MHz RFID Reader Integrated in Tablet

18. Rear-facing camera (3 Megapixel or better) Integrated in Tablet

NOFORN

Item Description Exhibit 1A--Minimum Tablet Specifications for Tablet A - Full Featured Rugged Tablet

Enclosure (3) Sheet 2 of 2

NOFORN

Tablet B - (with Digitizer Pen and at least one extra battery)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 3Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 128Gb Solid State Drive minimum

2.2 SDRAM: 8Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and charging

5.2 Docking Station Capable

5.3 Multi-Slot Docking Station Capable

6. Display

6.1 Screen Size (Diagonal) - 8.9” minimum to 10.5” maximum

6.2 Dual or Multi-touch

6.3 LED Backlit

6.4 Screen auto-rotates based on user orientation

6.5 Strengthened Glass Screen (e.g. Gorilla Glass® or equivalent)

7. Pointing Devices

7.1 Includes (1) Digitizer Pen. Device compatible, storable on or tethered to device, capability to support mouse over, at least one button (capable of performing right-click operation), replaceable pen tips and enabling hand written input on tablet.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range.

9. Battery

9.1 Lithium Ion Battery

9.2 Hot swappable

10. Audio

10.1 Speaker(s)

10.2 Headphone jack (If no headphone jack a 3.5mm jack to USB adapter is acceptable if included with tablet)

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12.1 Integrated Smart Card Reader (for DOD CAC) within tablet

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet will function after NAVSEA loads/configures the following Dept of Navy Required Software. Software versions mentioned are those currently approved for use.

14.1 Microsoft Windows 7 Enterprise

14.2 FIPS certified wireless supplicants (e.g. Juniper)

14.3 NAVSEA Provided Supplicant (e.g. Juniper) supports WPA2-Ent or xSec using DoD PKI

14.4 NAVSEA Provided Supplicant (e.g. Juniper) supports separate wired 802.1x profile (MSCHAPv2 PEAP) [Required for wired connected maintenance]

14.5 NAVSEA Provided Supplicant (e.g. Juniper) supports separate device and user authentication

14.6 Software for DoD PKI certificates

14.7 Symantec Endpoint Encryption (Framework + Full Disk + Removable Storage) v8.2

14.8 Installroot v3.1.5a

14.9 ActivClient v6.2

14.10 Desktop Validator v4.9.2

14.11 Group Policy Objects (GPOs) to enforce STIG/SRG policies

14.12 Patches for all IAVAs + Retina scans

14.13 DoD Host Based Security System (HBSS) Suite Of Tools (All products + VSE v8.8)

14.14 Required device control (McAfee HDLP Device control)

14.15 Odyssey client FIPS (802.1x supplicant) v5.4

14.16 McAfee v4.5.0 anti-virus software

15. Ruggedized IAW:

15.1 Moisture intrusion standards such as IEC 60529 IP 52/53/54 (or equivalent military standard)

15.2 Drop Tested standard such as MIL-STD-810G Method 516 (or equivalent international standard)

Item Description Exhibit 1B--Minimum Tablet Specifications for Tablet B - Standard Rugged Tablet

Tablet C - (with Pointing Pen and Folio Case if Card Reader attached to Case)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 1Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 64Gb minimum

2.2 SDRAM: 4Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and AC charging (must include Docking Station with tablet if required to achieve)

6. Display

6.1 Screen Size (Diagonal) – 10.3” minimum to 12.5” maximum

6.2 Dual or Multi-Touch Screen

7. Pointing Devices

7.1 Include (1) Pointing Pen; Device compatible and storable on or tethered to device.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range

9. Battery

9.1 Lithium Ion Battery

10. Audio

10.1 Speaker(s)

10.2 Headphone jack (If no headphone jack a 3.5mm jack to USB adapter is acceptable if included with tablet)

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12.1 Integrated Smart Card Reader (for DOD CAC) within tablet (or USB connected reader integrated within case)

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet will function after NAVSEA loads/configures the following Dept of Navy Required Software. Software versions mentioned are those currently approved for use.

14.1 Microsoft Windows 7 Enterprise

14.2 FIPS certified wireless supplicants (e.g. Juniper)

14.3 NAVSEA Provided Supplicant (e.g. Juniper) supports WPA2-Ent or xSec using DoD PKI

14.4 NAVSEA Provided Supplicant (e.g. Juniper) supports separate wired 802.1x profile (MSCHAPv2 PEAP) [Required for wired connected maintenance]

14.5 NAVSEA Provided Supplicant (e.g. Juniper) supports separate device and user authentication

14.6 Software for DoD PKI certificates

14.7 Symantec Endpoint Encryption (Framework + Full Disk + Removable Storage) v8.2

14.8 Installroot v3.1.5a

14.9 ActivClient v6.2

14.10 Desktop Validator v4.9.2

14.11 Group Policy Objects (GPOs) to enforce STIG/SRG policies

14.12 Patches for all IAVAs + Retina scans

14.13 DoD Host Based Security System (HBSS) Suite Of Tools (All products + VSE v8.8)

14.14 Required device control (McAfee HDLP Device control)

14.15 Odyssey client FIPS (802.1x supplicant) v5.4

14.16 McAfee v4.5.0 anti-virus software

15. Semi-Ruggedized for industrial use similar to standards in MIL-STD-810G (or equivalent international standards) for Drop and Moisture Intrusion.

Item Description Exhibit 1C--Minimum Tablet Specifications for Tablet C - Basic Semi-Rugged Tablet or Convertible PC

Tablet D - (with Pointing Pen and Folio Case if Card Reader attached to Case)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 1Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 64Gb minimum

2.2 SDRAM: 2Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and AC charging (must include Docking Station with tablet if required to achieve)

6. Display

6.1 Screen Size (Diagonal) - 8.5” minimum to 10.5” maximum

6.2 Dual or Multi-Touch Screen

7. Pointing Devices

7.1 Include (1) Pointing Pen; Device compatible and storable on or tethered to device.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range

9. Battery

9.1 Lithium Ion Battery

10. Audio

10.1 Speaker(s) or Headphone jack

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12.1 Integrated Smart Card Reader (for DOD CAC) within tablet (or USB connected reader integrated within case)

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet will function after NAVSEA loads/configures the following Dept of Navy Required Software. Software versions mentioned are those currently approved for use.

14.1 Microsoft Windows 7 Enterprise

14.2 FIPS certified wireless supplicants (e.g. Juniper)

14.3 NAVSEA Provided Supplicant (e.g. Juniper) supports WPA2-Ent or xSec using DoD PKI

14.4 NAVSEA Provided Supplicant (e.g. Juniper) supports separate wired 802.1x profile (MSCHAPv2 PEAP) [Required for wired connected maintenance]

14.5 NAVSEA Provided Supplicant (e.g. Juniper) supports separate device and user authentication

14.6 Software for DoD PKI certificates

14.7 Symantec Endpoint Encryption (Framework + Full Disk + Removable Storage) v8.2

14.8 Installroot v3.1.5a

14.9 ActivClient v6.2

14.10 Desktop Validator v4.9.2

14.11 Group Policy Objects (GPOs) to enforce STIG/SRG policies

14.12 Patches for all IAVAs + Retina scans

14.13 DoD Host Based Security System (HBSS) Suite Of Tools (All products + VSE v8.8)

14.14 Required device control (McAfee HDLP Device control)

14.15 Odyssey client FIPS (802.1x supplicant) v5.4

14.16 McAfee v4.5.0 anti-virus software

15. Semi-Ruggedized for industrial use similar to standards in MIL-STD-810G (or equivalent international standards) for Drop and Moisture Intrusion.

Item Description Exhibit 1D--Minimum Tablet Specifications for Tablet D - Basic Semi-Rugged Tablet or Convertible PC

The technical evaluation will be accomplished in two phases: Phase 1 - Written Proposal Technical Evaluation and Phase 2 - Testing of Samples.

Phase 1 – Written Proposal Technical Evaluation

The technical evaluation board will evaluate the offerors’ written proposals in accordance with the Phase 1 Evaluation Criteria to determine technical acceptance. All CLINS (I,e. tablets and accessories) will be evaluated in Phase 1 based on written documentation.

Offerors shall provide supporting documentation (e.g. Drop Test and Moisture Intrusion) for the proposed solution (i.e. tablets and accessories) with the written proposal.

The three offerors whose proposals are identified as being the lowest priced, technically acceptable will move to Phase 2.

Phase 2 – Testing of Samples

The three lowest priced, technically acceptable offerors shall provide 3 sample tablets for each of the tablets proposed (3ea. CLIN 0001 - Full Featured Rugged Tablet, 3 ea. CLIN 0010 - Standard Rugged Tablet, 3 ea. CLIN 0019 - Basic Durable Tablet, 3 ea. CLIN 0025 - Compact Basic Durable Tablet) to be evaluated in accordance with Phase 2 Evaluation Criteria. (Vendors shall be prepared to ship 3 sample tablets via expedited shipping (e.g. FedEx - Overnight) when notified by the Contracting Officer that their products are to be evaluated in Phase 2.)

If a tablet requires an accessory to fulfill the technical requirements for the respective tablet CLIN, then that accessory is essentially a part of the tablet and therefore must be provided for Phase 2 evaluation. For example, if a docking station is required to achieve CLIN Specification 5.1 - Wired network Capability, then the docking station shall be provided with the tablet for Phase 2 testing.

Lastly, integrated RFID readers, barcode scanners, cameras and CAC readers (as required by tablet specification set forth in each CLIN) integrated within the tablet case are NOT considered accessories, and shall be required for Phase 2 testing.

When a specific brand and model of tablet is part of multiple offers from the same offeror, the offeror may provide only 3 of each tablet brand (i.e. One test set). The offeror must communicate clearly to the contracting officer (e.g. by using specific tablet part or batch number) the alignment of: (a) offers submitted, (b) tablet provided and (c) tablet requirement (i.e. Tab A, B, C or D) to ensure the appropriate test criteria are applied if and when invited to participate in Phase 2 (Testing of Samples).

Alternatively, if a tablet manufacturer is providing a specific brand and model of tablet via multiple offerors, then the manufacturer will be required to provide only 3 of each tablet (i.e. one test set) provided each offeror individually confirms and accepts the responsibility for the manufacturer’s delivery of the tablets (timeliness and capability). The offeror (s) will provide such confirmation and acceptance of responsibility in writing to the contracting officer when responding to the invitation to participate in Phase 2.

Award will be made to the lowest priced, technically acceptable offeror whose proposed tablets meet all evaluation criteria.

Attachment 2: Technical Evaluation

Tablet A (with Integrated Handle, Digitizer Pen and at least one extra battery)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 3Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 128Gb Solid State Drive minimum

2.2 SDRAM: 8Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and charging

5.2 Docking Station Capable

5.3 Multi-Slot Docking Station Capable

6. Display

6.1 Screen Size (Diagonal) - 8.9” minimum to 10.5” maximum

6.2 Dual or Multi-touch

6.3 LED Backlit

6.4 Screen auto-rotates based on user orientation

6.5 Strengthened Glass Screen (e.g. Gorilla Glass® or equivalent)

7. Pointing Devices

7.1 Includes (1) Digitizer Pen. Device compatible, storable on or tethered to device, capability to support mouse over, at least one button (capable of performing right-click operation), replaceable pen tips and enabling hand written input on tablet.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range.

9. Battery

9.1 Lithium Ion Battery

9.2 Hot swappable

9.3 One extra OEM Battery included

10. Audio

10.1 Speaker(s)

10.2 Headphone jack (If no headphone jack a 3.5mm jack to USB adapter is acceptable if included with tablet)

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12.1 Integrated Smart Card Reader (for DOD CAC) within tablet

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet Functions after NAVSEA loads/configures Dept of Navy Required Software.

Will be performed in Phase 2

15. Ruggedized IAW:

15.1 Moisture intrusion standards such as IEC 60529 IP52/53/54 (or equivalent military standard)

15.2 Drop Tested standard such as MIL-STD-810G Method 516 (or equivalent international standard)

16. Bar-code Reader (Integrated in tablet case and capable of reading linear/1D (one-dimensional) and 2D bar code label types).

17. 13.56 MHz RFID Reader Integrated in Tablet

18. Rear-facing camera (3 Megapixel or better) Integrated in Tablet

19. Accessories Provided

19.1 PC Wired Optical Mouse which includes:

19.1.1 3 buttons

19.1.2 USB connection

19.1.3 Microsoft OS compatible

19.2 Keyboard

19.2.1 External wired USB

19.2.2 Integrated touchpad

19.2.3 US QWERTY, 88 key mobile tablet keyboard

19.3 (1) Pointing Pen Device

19.3.1 (1) Digitizer Pen

19.3.2 Storable on or tethered to device

19.3.3 Capability to support mouse over, at least one button (capable of performing right-click operation

19.3.4 Replaceable pen tips

19.3.5 Enabling hand written input on tablet

19.4 Tablet carrying case (folio) :

19.4.1 Case opening allow access/use of ports, CAC, camera and other connections

19.4.2 Wraps 360 degrees around tablet

19.4.3 Transformable into a tablet stand

19.5 Multi-Battery Gang charging station. Minimum capacity of 3 tablet batteries (US Power)

19.6 Extra OEM Tablet Battery

19.7 Screen Protector for a Single Tablet Protective Film that is:

19.7.1 Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration

19.7.2 Optically clear film

19.7.3 2H high surface hardness

19.8 Network Interface Connector (NIC)

19.8.1 USB to Ethernet 10/100Mbps adapter

19.9 Printer (w/o Fax capability)

19.9.1 PC MS Win 7 Compatible – Portable/Mobile Printer with

19.9.2 USB std connection

19.9.3 Battery and AC charger

19.9.4 Lithium Battery Powered (minimum 2 hours or 200 Pages per charge) and AC power/charger included

19.9.5 Accommodates Legal and Letter Paper sizes

19.9.6 Color and Black & White printing

19.9.7 Ink Jet or better Print Medium

19.10 Docking Station for a Single Tablet

19.10.1 Must have at least two USB connections and US power

19.11 Multi-Tablet Charging and Storing Rack (but no Ethernet connection)

19.11.1 Stores a minimum of 5 tablets

19.11.2 Charges tablets (US Power)

19.12 Tablet A - Ethernet Based Network Tablet Multi-Dock Rack

19.12.1 Stores & Automatically connects a minimum of 5 tablets to network

19.12.2 Charges tablets (US Power)

19.12.3 Enables direct 10/100 Mbps remote connectivity

Evaluation Criteria Phase 1 Tablet A—Full Featured Rugged Tablet

Tablet B (with Digitizer Pen and at least one extra battery)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 3Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 128Gb Solid State Drive minimum

2.2 SDRAM: 8Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and charging

5.2 Docking Station Capable

5.3 Multi-Slot Docking Station Capable

6. Display

6.1 Screen Size (Diagonal) - 8.9” minimum to 10.5” maximum

6.2 Dual or Multi-touch

6.3 LED Backlit

6.4 Screen auto-rotates based on user orientation

6.5 Strengthened Glass Screen (e.g. Gorilla Glass® or equivalent)

7. Pointing Devices

7.1 Includes (1) Digitizer Pen. Device compatible, storable on or tethered to device, capability to support mouse over, at least one button (capable of performing right-click operation), replaceable pen tips and enabling hand written input on tablet.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range

9. Battery

9.1 Lithium Ion Battery

9.2 Hot swappable

9.3 One extra OEM Battery included

10. Audio

10.1 Speaker(s)

10.2 Headphone jack (If no headphone jack a 3.5mm jack to USB adapter is acceptable if included with tablet)

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12.1 Integrated Smart Card Reader (for DOD CAC) within tablet

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet functions after NAVSEA loads/configures Dept of Navy Required Software.

15. Ruggedized IAW:

15.1 Moisture intrusion standards such as IEC 60529 IP 52/53/54 (or equivalent military standard)

15.2 Drop Tested standard such as MIL-STD-810G Method 516 (or equivalent international standard)

16. Accessories Provided

16.1 PC Wired Optical Mouse which includes:

16.1.1 3 buttons

16.1.2 USB connection

16.1.3 Microsoft OS compatible

16.2 Keyboard:

16.2.1 External wired USB

16.2.2 Integrated touchpad

16.2.3 US QWERTY, 88 key mobile tablet keyboard

16.3 Pointing Pen Device (1)

16.3.1 (1) Digitizer Pen

16.3.2 Storable on or tethered to device

16.3.3 Capability to support mouse over, at least one button (capable of performing rightclick operation

16.3.4 Replaceable pen tips

16.3.5 Enabling hand written input on tablet

16.4 Tablet carrying case (folio):

16.4.1 Case opening allow access/use of ports, CAC, camera and other connections

16.4.2 Wraps 360 degrees around tablet

16.4.3 Transformable into a tablet stand

16.5 Multi-Battery Gang charging station. Minimum capacity of 3 tablet batteries (US Power)

16.6 Extra OEM Tablet Battery

16.7 Screen Protector for a Single Tablet Protective Film that is:

16.7.1 Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration

16.7.2 Optically clear film

16.7.3 2H high surface hardness

16.8 Network Interface Connector (NIC)

16.8.1 USB to Ethernet 10/100Mbps adapter

16.9 Printer (w/o Fax capability)

16.9.1 PC MS Win 7 Compatible – Portable/Mobile Printer with

16.9.2 USB std connection

16.9.3 Battery and AC charger

16.9.4 Lithium Battery Powered (minimum 2 hours or 200 Pages per charge) and AC power/charger included

16.9.5 Accommodates Legal and Letter Paper sizes

16.9.6 Color and Black & White printing

16.9.7 Ink Jet or better Print Medium

16.10 Docking Station for a Single Tablet

16.10.1 Must have at least two USB connections and US power

16.11 Multi-Tablet Charging and Storing Rack (but no Ethernet connection)

16.11.1 Stores a minimum of 5 tablets

16.11.2 Charges tablets (US Power)

16.12 Single Tablet Battery Charging Station capable of charging (1) battery (US Power)

16.13 Tablet B - Ethernet Based Network Tablet Multi-Dock Rack

16.13.1 Stores & Automatically connects a minimum of 5 tablets to network

16.13.2 Charges tablets (US Power)

16.13.3 Enables direct 10/100 Mbps remote connectivity

Tablet B - Standard Rugged Tablet

Tablet C (with Pointing Pen)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 1Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 64Gb minimum

2.2 SDRAM: 4Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and AC charging (must include Docking Station with tablet if required to achieve)

6. Display

6.1 Screen Size (Diagonal) – 10.3” minimum to 12.5” maximum

6.2 Dual or Multi-Touch Screen

7. Pointing Devices

7.1 Include (1) Pointing Pen; Device compatible and storable on or tethered to device.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range

9. Battery

9.1 Lithium Ion Battery

10. Audio

10.1 Speaker(s)

10.2 Headphone jack (If no headphone jack a 3.5mm jack to USB adapter is acceptable if included with tablet)

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12.1 Integrated Smart Card Reader (for DOD CAC) within tablet (or USB connected reader integrated within case)

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet functions after NAVSEA loads/configures Dept of Navy Required Software.

15. Semi-Ruggedized for industrial use similar to standards in MIL-STD-810G (or equivalent international standards) for Drop and Moisture Intrusion.

16. Accessories Provided

16.1 PC Wired Optical Mouse which includes:

16.1.1 3 buttons

16.1.2 USB connection

16.1.3 Microsoft OS compatible

16.2 Keyboard:

16.2.1 External wired USB

16.2.2 Integrated touchpad

16.2.3 US QWERTY, 88 key mobile tablet keyboard

16.3 Pointing Pen Device (1)

16.3.1 Storable on or tethered to device

16.4 Tablet carrying case (folio):

16.4.1 Case opening allow access/use of ports, CAC, camera and other connections

16.4.2 Wraps 360 degrees around tablet

16.4.3 Transformable into a tablet stand

16.5 Multi-Battery Gang charging station. Minimum capacity of 3 tablet batteries (US Power) (If proposed tablet has removable battery)

16.6 Extra OEM Tablet Battery, (If proposed tablet has removable battery)

16.7 Screen Protector for a Single Tablet Protective Film that is:

16.7.1 Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration

16.7.2 Optically clear film

16.7.3 2H high surface hardness

16.8 Network Interface Connector (NIC)

16.8.1 USB to Ethernet 10/100Mbps adapter

16.9 Printer (w/o Fax capability)

16.9.1 PC MS Win 7 Compatible – Portable/Mobile Printer with

16.9.2 USB std connection

16.9.3 Battery and AC charger

16.9.4 Lithium Battery Powered (minimum 2 hours or 200 Pages per charge) and AC power/charger included

16.9.5 Accommodates Legal and Letter Paper sizes

16.9.6 Color and Black & White printing

16.9.7 Ink Jet or better Print Medium

Tablet C - Basic Semi-Rugged Tablet or Convertible PC

Tablet D (with Pointing Pen and Folio Case if Card Reader attached to Case)

1. Processor Speed

1.1 Minimum 1.6 GHZ Processor

1.2 Dual-Core Processor w/minimum 2 threads per core

1.3 64 bit architecture

1.4 Cache: 1Mb minimum

1.5 Trusted platform module (TPM) security chip v.1.2

2. Storage & Memory

2.1 64Gb minimum

2.2 SDRAM: 2Gb minimum

3. Ports

3.1 RJ-45 Ethernet 10/100MB: Required either in dock or unit

3.2 Minimum 1 USB port on device

4. Operating System

4.1 MS Windows 7 64bit

5. Docking

5.1 Must provide wired network capability and AC charging (must include Docking Station with tablet if required to achieve)

6. Display

6.1 Screen Size (Diagonal) - 8.5” minimum to 10.5” maximum

6.2 Dual or Multi-Touch Screen

7. Pointing Devices

7.1 Include (1) Pointing Pen; Device compatible and storable on or tethered to device.

8. Wireless

8.1 802.11a/b/g/n (Standard, not Draft)

8.2 At least one network interface card that supports 2x2x2 MIMO for IEEE 802.11n in the 5.0 GHz range

9. Battery

9.1 Lithium Ion Battery

10. Audio

10.1 Speaker(s) or Headphone jack (If no headphone jack a 3.5mm jack to USB adapter is acceptable if included with tablet)

11. Power

11.1 DC connector

11.2 AC/DC Power Supply

11.3 Power Management supporting Hibernation, Standby or Suspend/Resume Function

12. Password Security

12. 1 Integrated Smart Card Reader (for DOD CAC) within tablet (or USB connected reader integrated within case)

12.2 Tablet must be capable of CAC user authentication by using either ctl-alt-del on physical keyboard or by using a security button in order to initiate sequence to open the PIN entry form.

12.3 BIOS; Password Protected and Ability to enable/disable onboard devices

13. Internet Browser

13.1 Supported browser - IE=Internet Explorer 8 (or better)

13.2 JavaScript support

14. Tablet functions after NAVSEA loads/configures Dept of Navy Required Software.

15. Semi-Ruggedized for industrial use similar to standards in MIL-STD-810G (or equivalent international standards) for Drop and Moisture Intrusion.

16. Accessories Provided

16.1 PC Wired Optical Mouse which includes:

16.1.1 3 buttons

16.1.2 USB connection

16.1.3 Microsoft OS compatible

16.2 Keyboard:

16.2.1 External wired USB

16.2.2 Integrated touchpad

16.2.3 US QWERTY, 88 key mobile tablet keyboard

16.3 Pointing Pen Device (1)

16.3.1 Storable on or tethered to device

16.4 Tablet carrying case (folio):

16.4.1 Case opening allow access/use of ports, CAC, camera and other connections

16.4.2 Wraps 360 degrees around tablet

16.4.3 Transformable into a tablet stand

16.5 Multi-Battery Gang charging station. Minimum capacity of 3 tablet batteries (US Power) (If proposed tablet has removable battery)

16.6 Extra OEM Tablet Battery, (If proposed tablet has removable battery)

16.7 Screen Protector for a Single Tablet Protective Film that is:

16.7.1 Supportive of Capacitive/Multi Touch Screens & stylus/digitizer registration

16.7.2 Optically clear film

16.7.3 2H high surface hardness

16.8 Network Interface Connector (NIC)

16.8.1 USB to Ethernet 10/100Mbps adapter

Tablet D - Compact Basic Semi-Rugged Tablet

1. Validate the use of Department of Defense Common Access Card (CAC) controlling access to device.

2. Validate the ability of the Government to load, and the functionality of the tablet after, the Department of Navy (DON) security suite of software is installed to include the following:

2.1 Microsoft Windows 7 Enterprise

2.2 FIPS certified wireless supplicants (e.g. Juniper)

2.3 NAVSEA Provided Supplicant (e.g. Juniper) supports WPA2-Ent or xSec using DoD PKI

2.4 NAVSEA Provided Supplicant (e.g. Juniper) supports separate wired 802.1x profile (MSCHAPv2 PEAP) [Required for wired connected maintenance]

2.5 NAVSEA Provided Supplicant (e.g. Juniper) supports separate device and user authentication

2.6 Software for DoD PKI certificates

2.7 Symantec Endpoint Encryption (Framework + Full Disk + Removable Storage) v8.2

2.8 Installroot v3.1.5a

2.9 ActivClient v6.2

2.10 Desktop Validator v4.9.2

2.11 Group Policy Objects (GPOs) to enforce STIG/SRG policies

2.12 Patches for all IAVAs + Retina scans

2.13 DoD Host Based Security System (HBSS) suite of tools (All products + VSE v8.8)

2.14 Required device control (McAfee HDLP Device control)

2.15 Odyssey client FIPS (802.1x supplicant) v5.4

2.16 McAfee v4.5.0 anti-virus software

3. Validate the tablet’s ability to connect via wireless connection in a test range that includes:

3.1 An Aruba AP 175, 802.11 a/b/g/n Access Point (Configured for "n" use only) mounted 80ft above ground level with AP-ANT-90 Outdoor Dual-Band, Down-Tilt Omni-Directional Diversity Antenna. The tablet will be positioned on a test bench 350 feet from the access point/antenna. Signal strength is expected to be at least -75Db. The tablet shall indicate mid range (or better) signal strength.

Phase 2

POINTS OF CONTACT AND SHIPPING ADDRESSES

Norfolk Naval Shipyard: N42158

Ship To:

Norfolk Naval Shipyard ATTN: Brad Stanfield Building 74/2, Code 1237 Portsmouth, VA 23709

Technical POC:

Brad Stanfield Phone: (757) 396-8900 Email: hilman.stanfield.ctr@navy.mil

Puget Sound Naval Shipyard and IMF: N4523A

Ship To:

Puget Sound Naval Shipyard & IMF ATTN: Dan McCauley, Code 1231.3 Bldg 850a 5th floor 1400 Farragut Avenue Bremerton, WA 98314-5001

Technical POC:

Dan McCauley, Code 1231.3 Phone: (360) 476-3155 / (360) 340-6577 Email: daniel.r.mccauley@navy.mil

Portsmouth Naval Shipyard: N39040

Ship To:

Portsmouth Naval Shipyard Bldg. 170 Receiving Officer ATTN: Shane Gilpatrick, Code 1231 Kittery, ME 03904

Technical POC:

Shane Gilpatrick, Code 1231 Phone: (207) 438-4911 Email: shane.e.gilpatrick@navy.mil

Pearl Harbor Naval Shipyard and IMF: N32253

Ship To:

Commander Code 1230, Attn: Tom Shigeta Pearl Harbor Naval Shipyard & IMF Building 167 Receiving 667 Safeguard Street, STE 100

JBPHH, HI 96860-5033

Technical POC:

Tom Shigeta Phone: (808) 473-8000 x6044 Email: thomas.shigeta@navy.mil

Submit Invoices to:

Invoices to be submitted via WAWF

Payment Office: N68732 DFAS – Cleveland Puget Accounts Payable P.O. Box 998022 Cleveland, OH 44199

Email copy of the order to:

hilman.stanfield.ctr@navy.mil daniel.r.mccauley@navy.mil shane.e.gilpatrick@navy.mil thomas.shigeta@navy.mil steven.p.paterson@navy.mil.