A00L_DID OT-11-20019_C-9 Aircraft Time Cycle Comp Tracking Report.doc

DATA ITEM DESCRIPTION

Title:

Aircraft Time/Cycle component Tracking Report Number:

OT-11-20019

Approval Date:

20110707 AMSC Number:

N/A Limitation:

NA

DTIC Applicable:

N/A GIDEP Applicable:

N/A Office of Primary Responsibility:

AS/PMA 207

Applicable Forms:

N/A

Use/relationship:

Aircraft Time/Cycle Component Tracking Report provides tracking of specific components that are turned in to the repair facility based on the time and cycles spent on the aircraft.

This Data Item Description (DID) contains format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract and described in the Performance Work Statement (PWS).

This DID is for One-Time use for solicitation N00019-10-R-0039.

Requirements:

1. Format. The Aircraft Time/Cycle Component Tracking Report shall be in the Contractor’s format.

2. Content. The Aircraft Time/Cycle Component Tracking report shall contain the following sections:

2.1 Section 1 – This section shall include the elements of the Airframe and shall identify:

a. Aircraft Serial Number

b. Total Flight Hour/Cycles/Landings

c. Part Number of Component

d. Nomenclature

e. Serial Number of component

f. Installed Date

g. Installed Hours/Cycles/Landings

h. Time Between Overhaul (TBO) Interval

i. Time Since Overhaul (TSO) Interval

j. Time Remaining

k. Life Limited Components Status

2.2 Section 2 – This section shall include the elements of the Engine and shall identify:

a. Engine Serial Number (ESN)

b. Site Location and Spares

c. Aircraft BUNO and position on Aircraft

d. Last ESV 1 inspection completion data

e. Last ESV 2 inspection completion date

f. Engine install date after stop visit and hours to next scheduled shop visit

g. C-1 and C-2 disk serial number listing with dates, total hours and cycles available for that disk and hours and cycles remaining

h. Alert Service Bulletins and Service Bulletins 6228, 6230, 6431, 6038, 5639, 5913 to include last inspection or compliance and next scheduled requirements determined by hours, cycles or delays as required.

3. End of OT-11-20019

8 February 2011