Attachment 1 Statement of Work for Ironless Linear Motor.pdf
PDF 64 KB Posted
- Attached to
- Ironless Linear Motor Per Attachment 1
- Solicitation number
- MV482783
- Issued by
-
Department of Energy Office of Science
About this file
This is a Statement of Work (SOW) issued by Brookhaven National Laboratory (managed by Brookhaven Science Associates for the U.S. Department of Energy) for the procurement of a low-profile ironless linear motor for a measurement system.
The required ironless linear motor must meet specific technical specifications including: an ironless forcer design rated for high vacuum environments with continuous force capability exceeding 10 Newtons; a modular magnet track length of 3.3 meters composed of 0.25-meter increments; a forcer length under 100 millimeters; total thickness under 16 millimeters; total width under 48 millimeters; and Wye phase connection. The document includes example dimensional drawings indicating a width of 0.49 inches (12.54 millimeters) and height of 1.65 inches (42.02 millimeters). The SOW explicitly states that the information provided is high-level procurement and technical evaluation guidance and does not constitute export-controlled technology or technical data under applicable federal regulations. The document was signed by Thomas Brookbank on August 27, 2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 SOW Ironless Linear Motor.pdf | ||
| B1 Draft PO.pdf | ||
| BSA COMMERICAL TERMS REV 25.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
P.O. Box 5000 Upton, NY 11973-5000 managed by Brookhaven Science Associates for the U.S. Department of Energy
Subject: Statement of Work for Ironless Linear Motor
Date: 8/27/2026
Overview:
BSA requires a low-profile Ironless Linear Motor for a measurement system.
Technical Specifications:
Item Specification Forcer Ironless
Vacuum level High Vacuum
Continuous force > 10N
Magnet Track Length Modular length equal to 3.3m.
That can be increments of 0.25m
Forcer Length < 100 mm
Total Thickness < 16 mm
Total Width < 48 mm
Phase Connection Wye
Example dimensions:
This document contains BNL procurement requirements and specifications for solicitation and technical evaluation. The information is high-level and does not include the detail necessary for 'development' or 'production' as defined under 15 CFR §772.1, 22 CFR §120.33, or 10 CFR
Part 810; therefore, it does not constitute export-controlled technology or technical data
Signature:
8/27/2026
X Thomas Brookbank
Signed by: Thomas Brookbank
File details come from the government source that posted it. Updated .