MTRs and Cutsheets.pdf

JSN:

Project Name:

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics Mechanical Assist 2 Spoke Handle Mobile Carriages Total 1 Non-Mobile Platform Carriage All Carriages are 8' 5- 3/4"L with 2 48" W sections Each shelf to be minimum 18" high.

Total Carriage Height 83 ¼". Total System Length with Handle 103 7/8" 2 Carriages are 48 1/16" D, double faced with center stop 2 Carriages are 24 1/16" D, single face Shelving consists of 104 16" H uprights 4 levels, 6 dividers per level to hold monitors Elevations can be adjusted on 1" increments Waste High Hub Lock Included to enable locking down entire system Standard LPL Front Panels and Standard Powder Coat Paint Finishes L Rail to be installed with plywood decking.

**Mobile System installer to install customer/contractor supplied Flooring Each section offers storage capacity of (24) monitors / 1 per slot. Total system capacity is (288) monitors.

Finish Options Standard Powder Coat Paint Finish: SF208 Folkstone" Wilsonart Standard Laminate: SF213 Fog Grey

MTR Characteristics See Attached

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A1145 MTR: SP2Spacesaver Donnegan Systems, Inc.

SEE BOM

Spacesaver Mechanical Assist 2 Spoke Handle Mobile Carriage High Density Storage System

184.5" 100" - 120" 104" - 105" 55540 lbs.

No No No No No No No No

N/A N/A N/A N/A N/A N/A

None None None None

Quantity: 1

OFFICE OF INFORMATION TECHNOLOGY (OI&T) / OI&T Intake #116 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Additional Images:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A1145

MTR: SP2

FOLKSTONE SF208

MTR Characteristics SP2: File, Specialty, High Density General Specifications:

a. Variety of heights to accommodate all types of file and object sizes and quantity of drawers / shelves needed

b. Variety of widths varying from 24 - 48" wide shelves but up to a total of 540" carriage span, and depth of 10 - 36" deep

c. Must offer varying types of file storage such as drawers and open shelving for top tab and end tab record type storage via modular components

d. Must have ability to fully close and lock to secure contents

e. Side to side or font to back sliding mobile solutions

f. Barrier free rail or recessed track capability

g. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet

h. Individual locking components such as a single security drawer

i. Add on units that eliminate the duplication of frame

j. Mechanical / power assist options to minimize force for mobility to meet ADA Accessibility Guidelines either hand or foot location

k. Mechanical assist system shall have user-activated safety locking pin and a photoelectric beam...

l. Powered units shall have passive safety system, safety floor sweeps and protection to automatically arrest carriage movement when a person or object is detected in an open aisle.

m. Each carriage has a minimum load carrying capacity of 1,000 lbs per linear foot.

n. Built-in anti-tip devices can be engineered to comply with the requirements of all seismic zones.

o. Aisle ways, floor ramps, and floor finish must meet ADA guidelines.

p. Interior components for front to back filing rails must be removable and field replaceable.

q. Drawers shall operate with full extension, telescoping, steel ball-bearing slides for full access to all drawer contents and smooth operation Optional Configurations:

a. Optional posting shelf

b. Optional label holders

c. Common top options to span over multiple units in either laminate or wood

d. Variety of color options including laminate / wood clad options

e. Optional keypad access

MTR Category (Filing and Storage): GENERAL REQUIREMENTS FOR ALL FILING AND STORAGE:

a. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A1145

MTR: SP2

MTR Characteristics (continued)

b. Limited Lifetime Warranty for parts and labor

c. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost

d. Contribute to LEED points

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics Maple Hardwood Seat Top with stainless steel construction pedestals Freestanding/movable Corrosion Resistant Non Skid Rubber Feet Pads for Pedestals

Finish Options Maple Top/Stainless Pedestal

MTR Characteristics SF2: Site Furniture, Benches and Tables, Wood or Composite or combination of wood and metal General Specifications:

a. FSC certified wood available

b. All wood finished with a clear catalyzed acrylic lacquer

c. Metal parts powder coat finish available

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5025 MTR: SF2School Lockers Lyon Workspace Products, Inc.BFS-1536 36" x 15" Wood Locker Bench with 2 Free Standing Pedestals Bench, Locker Room, Portable, 36"W

36" 15" 17.5" 26 lbs.

No No No No No No No No

N/A N/A N/A N/A N/A N/A

None None None None

Quantity: 2

FITNESS / Men's Shower and Lockers #B03B (1) FITNESS / Women's Shower and Lockers #B03A (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics Dual Monitor Arm with Crossbar Monitor bracket holds monitors from 17-24", weight up to 42lbs Surface Mounted with two piece clamp Arm reach: 15-22" Arm Style: Fixed Angled Link/Dynamic Link End Style: Ball joint Built in fine tune adjuster, Integrated cable management, 180 degree stop mechanism to prevent wall damage from over rotation.

Counter balances monitors with a simple hex screw adjustment;

hex screw to be included Quick release ball joint to facilitate easy install and removal Support multiple VESA plate hole patterns Include both desk clamp and grommet mount

Finish Options Silver with gray trim

MTR Characteristics CS2: Computer Support Tools- Monitor Arms General Specifications:

a. Adaptable to single or double

b. Gas assists lifting, one finger adjustment and 360 degree movement

c. Quick release monitor holder

d. Mounting option to include C-clamp, bolt-through, grommet and wall mount

e. Wire management down arm

f. Dual monitor arms move independent from each other

g. Dual monitor arms position two screens side by side with minimum gap

h. A minimum of 10 year warranty

Optional Configurations:

a. Double pivot or Dual Joint Monitor arm allows for turning monitor 180 degrees

b. Sit-to-stand monitor arm option

c. Dual tandem monitor arm option

d. N/A

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225 MTR: CS2Humanscale Unspecified

M8CS1C

M8 Crossbar Bracket, Dual Computer Monitor, Clamp

24" - 28" 19" - 22" 22" - 24" 9 lbs.

No No No No No No No No

N/A N/A N/A N/A N/A N/A

None None None None

Quantity: 331

See Attached

Project Location:

Contract / Order:

Submittal: Date Prepared:

Additional Images:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225

MTR: CS2

Project Location:

Contract / Order:

Submittal: Date Prepared:

Departments / Rooms (qty.):

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225

MTR: CS2

VETERANS SERVICES (VS) / Office (VS) #323A (1) VETERANS SERVICES (VS) / Office (VS) #355 (1)

EXECUTIVE DIRECTOR (SES) / Office (SES) #237 (1) EXECUTIVE DIRECTOR (SES) / Office (SES) #242 (1) EXECUTIVE DIRECTOR (SES) / Office (SES) #243 (1) EXECUTIVE DIRECTOR (SES) / Office (SES) #248 (1)

FACILITIES & LOGISTICS (F&L) / Incoming/Outgoing Mail/Amazon Supply Rm #101 (3) FACILITIES & LOGISTICS (F&L) / Office (F&L) #105 (1) FACILITIES & LOGISTICS (F&L) / Office (F&L) #106 (1) FACILITIES & LOGISTICS (F&L) / Office (F&L) #107 (1) FACILITIES & LOGISTICS (F&L) / Office (F&L) #108 (1) FACILITIES & LOGISTICS (F&L) / Office (F&L) #109 (1) FACILITIES & LOGISTICS (F&L) / Office (F&L) #110 (1) FACILITIES & LOGISTICS (F&L) / Office (F&L) #111 (1) FACILITIES & LOGISTICS (F&L) / Office Space (F&L) #104 (8)

FACILITIES & LOGISTICS (F&L) / PIV (F&L) #122 (2)

FACILITIES & LOGISTICS (F&L) / Mail Supervisor #101A (1)

ENROLLMENT STANDARDIZATION OFFICE (ESO) / Office (ESO) #236 (1) ENROLLMENT STANDARDIZATION OFFICE (ESO) / Office (ESO) #238 (1) ENROLLMENT STANDARDIZATION OFFICE (ESO) / Office (ESO) #239 (1) ENROLLMENT STANDARDIZATION OFFICE (ESO) / Office (ESO) #240 (1) ENROLLMENT STANDARDIZATION OFFICE (ESO) / Office (ESO) #241 (1)

HEALTH ELIGIBILITY CENTER (HEC) / HEC #221 (1)

HEALTH ELIGIBILITY CENTER (HEC) / Office #223 (1) HEALTH ELIGIBILITY CENTER (HEC) / Office #225 (1) HEALTH ELIGIBILITY CENTER (HEC) / Office #226 (1)

TRAINING / Office #209 (1) TRAINING / Office #210 (1) TRAINING / Office #211 (1) TRAINING / Office #212 (1) TRAINING / Office #213 (1) TRAINING / Office #214 (1) TRAINING / Office #261 (1) TRAINING / Office #262 (1) TRAINING / Office #263 (1) TRAINING / Office #264 (1) TRAINING / Training #266 (2)

AFGE (UNION) / Office (AFGE) #327 (1) AFGE (UNION) / Office (AFGE) #328 (1) AFGE (UNION) / Office (AFGE) #330 (1) AFGE (UNION) / Office (AFGE) #331 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Departments / Rooms (qty.):

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225 MTR: CS2ANALYTICS & INFORMATICS (A&I) / Office (A&I) #349 (1)

ANALYTICS & INFORMATICS (A&I) / Office (A&I) #350 (1)

ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #303 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #304 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #305 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #307 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #308 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #309 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #313 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #314 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #315 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #316 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #317 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #318 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #320 (1) ENROLLMENT ELIGIBILITY DIVISION (EED) / Office #321 (1)

ENROLLMENT ELIGIBILITY DIVISION (EED) / EED #301 (22)

ENROLLMENT ELIGIBILITY DIVISION (EED) / EED #306 (20)

ENROLLMENT ELIGIBILITY DIVISION (EED) / EED #312 (12)

EQUAL EMPLOYMENT OPPORTUNITY (EEO) / Office (EEO) #322 (1)

INCOME VERIFICATION DIVISION (IVD) / Office (IVD) #334 (1) INCOME VERIFICATION DIVISION (IVD) / Office (IVD) #335 (1) INCOME VERIFICATION DIVISION (IVD) / Office (IVD) #336 (1) INCOME VERIFICATION DIVISION (IVD) / Office #339 (1)

INCOME VERIFICATION DIVISION (IVD) / IVD #340 (38)

INCOME VERIFICATION DIVISION (IVD) / Office (IVD) #356 (1) INCOME VERIFICATION DIVISION (IVD) / Office (IVD) #357 (1) INCOME VERIFICATION DIVISION (IVD) / Office (IVD) #358 (1)

INCOME VERIFICATION DIVISION (IVD) / IVD #338 (14)

INCOME VERIFICATION DIVISION (IVD) / Office #340A (1) INCOME VERIFICATION DIVISION (IVD) / Office #340B (1) INCOME VERIFICATION DIVISION (IVD) / Office #340C (1) INCOME VERIFICATION DIVISION (IVD) / Office #340D (1)

OFFICE OF INSPECTOR GENERAL (OIG) / Open Collab (OIG) #405 (9) OFFICE OF INSPECTOR GENERAL (OIG) / ASAC Office #413 (1) OFFICE OF INSPECTOR GENERAL (OIG) / RAC Office #414 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #409 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #410 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #412 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #415 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Visitor Office #408 (1)

VETERAN TRANSPORTATION PROGRAM (VTP) / Office (VTP) #456 (1)

VETERAN CRISIS LINE (VCL) / VCL #419 (6)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Departments / Rooms (qty.):

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225 MTR: CS2VETERAN CRISIS LINE (VCL) / Office (VCL) #421 (1)

VETERAN CRISIS LINE (VCL) / Office (VCL) #423 (1) VETERAN CRISIS LINE (VCL) / Office #424 (1)

EXECUTIVE LEADERSHIP TEAM (ELT) / ELT #125 (2)

EXECUTIVE LEADERSHIP TEAM (ELT) / Office (ELT) #120 (1) EXECUTIVE LEADERSHIP TEAM (ELT) / Office (ELT) #121 (1) EXECUTIVE LEADERSHIP TEAM (ELT) / Office (ELT) #124 (1) EXECUTIVE LEADERSHIP TEAM (ELT) / Office (ELT) #126 (1) EXECUTIVE LEADERSHIP TEAM (ELT) / Office (ELT) #128 (1) EXECUTIVE LEADERSHIP TEAM (ELT) / Office (ELT) #130 (1)

HOTELING / Hoteling #438 (9) HOTELING / Hoteling #440 (32) HOTELING / Hoteling #443 (20) HOTELING / Hoteling Office #351 (1) HOTELING / Hoteling Office #353 (1) HOTELING / Office #432 (1) HOTELING / Office #433 (1) HOTELING / Office #434 (1) HOTELING / Office #435 (1) HOTELING / Office #436 (1) HOTELING / Office #437 (1) HOTELING / Hoteling Office #354 (1)

OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Closet #230J (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Imaging (L) #231 (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230A (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230B (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230C (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230D (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230E (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230F (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230G (1) OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Office #230H (1)

OFFICE OF INFORMATION TECHNOLOGY (OI&T) / OIT #230 (1)

PHARMACY BENEFIT MANAGEMENT SERVICE (PBM) / Office #446 (1) PHARMACY BENEFIT MANAGEMENT SERVICE (PBM) / Office #447 (1) PHARMACY BENEFIT MANAGEMENT SERVICE (PBM) / Office #448 (1) PHARMACY BENEFIT MANAGEMENT SERVICE (PBM) / Office #449 (1) PHARMACY BENEFIT MANAGEMENT SERVICE (PBM) / Office #453 (1)

PHARMACY BENEFIT MANAGEMENT SERVICE (PBM) / PBM #455 (3)

QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #244 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #245 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #246 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #247 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #250 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #251 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Departments / Rooms (qty.):

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225 MTR: CS2QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #253 (1)

QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #254 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #255 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #256 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #257 (1) QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / Office (QAMB) #258 (1)

QUALITY ASSURANCE/MEMBERS BENEFITS DIVISION (QAMB) / QAMB #252 (10)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics Arm height adjustment range: 4.5" to 36.5" Outside monitor extension: 28.75" Center monitor extension: 6" Monitor retraction: 4 Monitor tilt +30/-25 degrees Monitor rotations +90/-90 degrees Weight capacity: 4.4 - 15.4 lbs 180 degree lock out feature VESA plate quick release Includes both desk clamp and grommet mount

Finish Options Silver Finish

MTR Characteristics CS2: Computer Support Tools- Monitor Arms General Specifications:

a. Adaptable to single or double

b. Gas assists lifting, one finger adjustment and 360 degree movement

c. Quick release monitor holder

d. Mounting option to include C-clamp, bolt-through, grommet and wall mount

e. Wire management down arm

f. Dual monitor arms move independent from each other

g. Dual monitor arms position two screens side by side with minimum gap

h. A minimum of 10 year warranty Optional Configurations:

a. Double pivot or Dual Joint Monitor arm allows for turning monitor 180 degrees

b. Sit-to-stand monitor arm option

c. Dual tandem monitor arm option

d. Triple monitor arm with independent movement or tandem option

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225A MTR: CS2ESI null

MPN: EVOLVE6-FMS-SLV/ Product Code: ES5959 EVOLVE6-FMS ESI-6 Monitor Arm Bracket, Computer Monitor, Desk-Mounted, 6 Monitor

9" No No No No No No No No

N/A N/A N/A N/A N/A N/A

None None None None

Quantity: 2

FACILITIES & LOGISTICS (F&L) / Lobby Security Intake (F&L) #131 (2)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics Rubberized Cable Management Patented, weight-compensating spring technology Built-in Counterbalance Indicator Patent-pending Smart Stop allows the user to customize the rotation of the arm, preventing overhang and protecting surrounding equipment Only one tool is required and is concealed inside the arm base Configured to hold up to three monitors Compatible with M/Connect 2 and M/Power, Warranty - 10 year, 24/7 Include both desk clamp and grommet mount

M10 Monitor Arm BT- Bolt -Through Mount S - Silver with Gray Trim B - Angled Link/Dynamic Link 3 - Crossbar for 3 monitors B - Standard 100mm x 100mm, black

Finish Options Silver Finish

MTR Characteristics See Attached

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225B MTR: CS2Humanscale Unspecified

X2BCMSETBETB---12--

M10 Triple Monitor Arm Bracket, Monitor, Triple, Desk Mounted null" - null" null" - null" 12" No No No No No No No No

N/A N/A N/A N/A N/A N/A

None None None None

Quantity: 3

HEALTH ELIGIBILITY CENTER (HEC) / Dir Office (HEC) #224 (1)

EXECUTIVE LEADERSHIP TEAM (ELT) / Associate Executive Director (ELT) #129 (1) EXECUTIVE LEADERSHIP TEAM (ELT) / Executive Director

(ELT) #127 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

A5225B

MTR: CS2

MTR Characteristics CS2: Computer Support Tools- Monitor Arms General Specifications:

a. N/A

b. Gas assists lifting, one finger adjustment and 360 degree movement

c. Quick release monitor holder

d. Mounting option to include C-clamp, bolt-through, grommet and wall mount

e. Wire management down arm

f. Monitor arms move independent from each other

g. Monitor arms position screens side by side with minimum gap

h. A minimum of 10 year warranty

Optional Configurations:

a. Triple pivot or Triple Joint Monitor arm allows for turning monitor 180 degrees

b. Sit-to-stand monitor arm option

c. N/A

d. Triple monitor arm with independent movement or tandem option

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics Basis of Design:

A- HEIGHT ADJUSTABLE TABLE electric sit to stand worksurface with C-Foot B- N/A C-N/A D- SURFACE POWER/DATA- 4Elect. Recept/2 USB

E- CABLE MANAGEMENT TROUGH

Electrical components shall be UL rated Lift capacity - minimum 190 lbs including laminate top Leveling guides Powered with simple up/down adjustability Table Legs and Feet to be flush or as far to the outside edge as possible.

Included Accessories:

(1) Power to surface, 4 simplex and 2 USB connections, plug-in power w/ min. 6' cord

(1) Modesty panel w/added cable trough

Finish Options Height adjustable Worksurface: Patterned Laminate -Twill Neutral LBF Paint: Storage Satin Aluminum

MTR Characteristics See Attached

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0042 MTR: HAW3Herman Miller Unspecified

DU6ACS.2358LD + Accys Renew Workstation, Computer, Adj Ht., Straight, Type A

48" 18" - 24" 22" - 48" 150 lbs.

No No No No No No No No

120 N/A N/A N/A N/A N/A

None None None None

Quantity: 3

VETERAN CRISIS LINE (VCL) / Office (VCL) #421 (1) VETERAN CRISIS LINE (VCL) / Office (VCL) #423 (1) VETERAN CRISIS LINE (VCL) / Office #424 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Additional Images:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0042

MTR: HAW3

Base/Storage Laminate Top

Cable Management Trough

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0042

MTR: HAW3

MTR Characteristics HAW3: Height Adjustable Work Table, sit to stand, Electric, HPL GENERAL REQUIREMENTS for all HEIGHT ADJUSTABLE WORKSTATIONS

a. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

b. Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

c. Contributes to LEED Credits

d. Warranty minimum of 10 years to Lifetime

MTR Salient Characteristics: To include minimum of the following specifications:

a. Available in 24"-30"D x 36"-140" W in the rectangle configuration.

b. A variety of shapes including rectangular, 90 degree, 120 degree corner configurations

c. 25" - 50" +/- 2" electric height adjustability range

d. N/A

e. Lifting columns controlled by "master" and "slave" motors via a single switch.

f. Electrical - 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA

g. All assemblies meet or exceed ANSI/BIFMA standards

h. Worksurface to allow work tools to be attached.

i. 3-stage synchronized lifting columns with integral shrouding.

j. Push button height adjustability

k. Glides have .5" of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

l. Worksurface finish to be HPL

m. Edge of table top to include but not limited to T-mold and square option.

n. Wire management is available

o. A rigid design to maximize floor space without sacrificing stability.

p. Full clearance under the worksurface.

q. Electronics are certified by TUV to UL-73 and CSA C22.2

r. Provide trough to manage wires

s. 6'-0" minimum power cord

MTR Category (Tables and Carts): GENERAL REQUIREMENTS for all OCCASIONAL TABLES

a. Power/USB charging options.

b. Glides on each leg to move on carpet or hard floors without marring.

c. Anti-microbial finish applied to any finished exposed wood surfaces

d. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

e. Meet AWI (American Woodwork Institute) standards for joinery techniques.

f. Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

g. Limited Lifetime Warranty

h. Contributes to LEED Credits

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics 60W x 30D electric sit to stand desk with C-Foot, freestanding Table Legs and Feet to be flush or as far to the outside edge as possible.

Electrical components shall be UL Lift capacity - minimum 190 lbs including laminate top Leveling guides Powered with simple up/down adjustability Each freestanding table receives power to surface accessory (2 simplex and 2 USB connections with 10 foot plug in power cord).

(1) Power to surface, 4 simplex and 2 USB connections, plug-in power w/ min. 6' cord Cable trough

(1) Mobile Metal Pedestal (B/F) (not shown in Image)

* Drawers - full extension

* Pencil tray in box drawer, 2 file converter in file drawer

Finish Options Height adjustable Worksurface: Patterned Laminate -Twill Neutral LBF Paint: Storage Satin Aluminum

MTR Characteristics See Attached

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048 MTR: MSS2, HAW3Herman Miller Unspecified

DU6ACS.2358LD + Accys Renew Workstation, Computer, Adj Ht., Straight, with Pedestal

54" - 60" 24" - 30" 22" - 48" 150 lbs.

No No No No No No No No

120 N/A N/A 60 N/A N/A

None None None None

Quantity: 5

Project Location:

Contract / Order:

Submittal: Date Prepared:

Additional Images:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048

MTR: MSS2, HAW3

Worksurface Satin Aluminum Finish

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048

MTR: MSS2, HAW3

MTR Characteristics MSS2: Storage, Underdesk - Pedestals and Files General Specifications:

a. To be constructed of 22 gauge or better cold rolled steel, painted metal frame with a formed 22 gauge or better sheet steel drawer case with powder coated paint finish.

b. Drawer fronts shall be of either ¾" minimum HPL over particleboard or painted metal with replaceable fronts.

c. File drawers shall have full extension telescoping, steel ball bearing suspension rated to hold 90 pounds minimum and Integral filing rails.

d. Leveling glides shall be standard with nylon foot pad adjustable up to 1".

e. All drawers shall be full box construction type.

f. Laminate storage case construction is not allowed as part of the modular systems furniture category. Refer to Modular Casegoods to find requirements for laminate case storage.

MTR Category (Modular Systems Furniture): GENERAL SPECIFICATIONS FOR ALL MODULAR SYSTEMS

a. HPL and Solid Surface top options.

b. ADA accessible countertop option.

c. Locks shall be standard. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet.

d. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost

e. A Master key shall be provided per job at no extra cost.

f. All surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes

g. Available in a variety of top shapes and sizes with coordinating storage components, transaction tops, and panels to support and divide space.

h. Meet Greenguard or equivalent Certification for low emission of VOC's and indoor air quality for office furnishings.

i. Manufactured in an ISO9001 certified plant.

j. System must be available on quick-ship program and lead times ranging from shipment 10 days after receipt to reserved manufacturing time.

k. The system must anticipate future change and ensure availability for a period of 5 years

l. All warranty items shall include, labor, traveling, parts, and shipping of items

m. Warranty: Limited lifetime of materials and workmanship except for 12 years on power components, glides, and panel fabrics with 5 years on lighting ballasts and lighting power supplies.

HAW3: Height Adjustable Work Table, sit to stand, Electric, HPL GENERAL REQUIREMENTS for all HEIGHT ADJUSTABLE WORKSTATIONS

a. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

b. Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

c. Contributes to LEED Credits

d. Warranty minimum of 10 years to Lifetime

MTR Salient Characteristics: To include minimum of the following specifications:

a. Available in 24"-30"D x 36"-140" W in the rectangle configuration.

b. A variety of shapes including rectangular, 90 degree, 120 degree corner configurations

c. 25" - 50" +/- 2" electric height adjustability range

d. N/A

e. Lifting columns controlled by "master" and "slave" motors via a single switch.

f. Electrical - 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA

g. All assemblies meet or exceed ANSI/BIFMA standards

h. Worksurface to allow work tools to be attached.

i. 3-stage synchronized lifting columns with integral shrouding.

j. Push button height adjustability

k. Glides have .5" of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

l. Worksurface finish to be HPL

m. Edge of table top to include but not limited to T-mold and square option.

n. Wire management is available

o. A rigid design to maximize floor space without sacrificing stability.

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048

MTR: MSS2, HAW3

MTR Characteristics (continued)

p. Full clearance under the worksurface.

q. Electronics are certified by TUV to UL-73 and CSA C22.2

r. Provide trough to manage wires

s. 6'-0" minimum power cord

MTR Category (Tables and Carts): GENERAL REQUIREMENTS for all OCCASIONAL TABLES

a. Power/USB charging options.

b. Glides on each leg to move on carpet or hard floors without marring.

c. Anti-microbial finish applied to any finished exposed wood surfaces

d. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

e. Meet AWI (American Woodwork Institute) standards for joinery techniques.

f. Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

Project Location:

Contract / Order:

Submittal: Date Prepared:

Departments / Rooms (qty.):

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048

MTR: MSS2, HAW3

TRAINING / Sound / TV Studio (Training) #220 (1)

OFFICE OF INSPECTOR GENERAL (OIG) / Evidence Room #403 (1)

OFFICE OF INFORMATION TECHNOLOGY (OI&T) / Closet #230J (1)

OFFICE OF INFORMATION TECHNOLOGY (OI&T) / OIT #230 (1)

PHARMACY BENEFIT MANAGEMENT SERVICE (PBM) / PBM #455 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics 60W x 30D electric sit to stand desk with C-Foot, freestanding Table Legs and Feet to be flush or as far to the outside edge as possible.

Electrical components shall be UL Lift capacity - minimum 190 lbs including laminate top Leveling guides Powered with simple up/down adjustability Each freestanding table receives power to surface accessory (2 simplex and 2 USB connections with 10 foot plug in power cord).

(1) Power to surface, 4 simplex and 2 USB connections, plug-in power w/ min. 6' cord Cable Management trough

(1) Mobile Metal Pedestal (B/F)

* Drawers - full extension

* Pencil tray in box drawer, 2 file converter in file drawer

Finish Options Height adjustable Worksurface: Patterned Laminate -Twill Neutral LBF Paint: Storage Satin Aluminum

MTR Characteristics See Attached

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048A MTR: MSS2, HAW3Herman Miller Unspecified

DU6ACS.2358LD + Accys Renew Workstation, Computer, Adj Ht., Straight, with Pedestal, Type A

60" 24" - 30" 22" - 48" 150 lbs.

No No No No No No No No

120 N/A N/A 60 N/A N/A

None None None None

Quantity: 1

OFFICE OF INFORMATION TECHNOLOGY (OI&T) / OI&T Intake #116 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Additional Images:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048A

MTR: MSS2, HAW3

Worksurface Base/ Storage

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048A

MTR: MSS2, HAW3

MTR Characteristics MSS2: Storage, Underdesk - Pedestals and Files General Specifications:

a. To be constructed of 22 gauge or better cold rolled steel, painted metal frame with a formed 22 gauge or better sheet steel drawer case with powder coated paint finish.

b. Drawer fronts shall be of either ¾" minimum HPL over particleboard or painted metal with replaceable fronts.

c. File drawers shall have full extension telescoping, steel ball bearing suspension rated to hold 90 pounds minimum and Integral filing rails.

d. Leveling glides shall be standard with nylon foot pad adjustable up to 1".

e. All drawers shall be full box construction type.

f. Laminate storage case construction is not allowed as part of the modular systems furniture category. Refer to Modular Casegoods to find requirements for laminate case storage.

MTR Category (Modular Systems Furniture): GENERAL SPECIFICATIONS FOR ALL MODULAR SYSTEMS

a. HPL and Solid Surface top options.

b. ADA accessible countertop option.

c. Locks shall be standard. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet.

d. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost

e. A Master key shall be provided per job at no extra cost.

f. All surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes

g. Available in a variety of top shapes and sizes with coordinating storage components, transaction tops, and panels to support and divide space.

h. Meet Greenguard or equivalent Certification for low emission of VOC's and indoor air quality for office furnishings.

i. Manufactured in an ISO9001 certified plant.

j. System must be available on quick-ship program and lead times ranging from shipment 10 days after receipt to reserved manufacturing time.

k. The system must anticipate future change and ensure availability for a period of 5 years

l. All warranty items shall include, labor, traveling, parts, and shipping of items

m. Warranty: Limited lifetime of materials and workmanship except for 12 years on power components, glides, and panel fabrics with 5 years on lighting ballasts and lighting power supplies.

HAW3: Height Adjustable Work Table, sit to stand, Electric, HPL GENERAL REQUIREMENTS for all HEIGHT ADJUSTABLE WORKSTATIONS

a. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

b. Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

c. Contributes to LEED Credits

d. Warranty minimum of 10 years to Lifetime

MTR Salient Characteristics: To include minimum of the following specifications:

a. Available in 24"-30"D x 36"-140" W in the rectangle configuration.

b. A variety of shapes including rectangular, 90 degree, 120 degree corner configurations

c. 25" - 50" +/- 2" electric height adjustability range

d. N/A

e. Lifting columns controlled by "master" and "slave" motors via a single switch.

f. Electrical - 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA

g. All assemblies meet or exceed ANSI/BIFMA standards

h. Worksurface to allow work tools to be attached.

i. 3-stage synchronized lifting columns with integral shrouding.

j. Push button height adjustability

k. Glides have .5" of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

l. Worksurface finish to be HPL

m. Edge of table top to include but not limited to T-mold and square option.

n. Wire management is available

o. A rigid design to maximize floor space without sacrificing stability.

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0048A

MTR: MSS2, HAW3

MTR Characteristics (continued)

p. Full clearance under the worksurface.

q. Electronics are certified by TUV to UL-73 and CSA C22.2

r. Provide trough to manage wires

s. 6'-0" minimum power cord

MTR Category (Tables and Carts): GENERAL REQUIREMENTS for all OCCASIONAL TABLES

a. Power/USB charging options.

b. Glides on each leg to move on carpet or hard floors without marring.

c. Anti-microbial finish applied to any finished exposed wood surfaces

d. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

e. Meet AWI (American Woodwork Institute) standards for joinery techniques.

f. Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics L-shaped desk with bullet peninsula (30" x 72") and right-hand return (24" x 54")

(1) Electric Height Adjustable Freestanding work surface (24" x 54")

(1) Freestanding peninsula work surface(30" x 72") with modesty Panel

(1) Mobile Pedestal, Box/File with Lock Electrical components shall be UL Lift capacity - minimum 190 lbs including laminate top Leveling guides Powered with simple up/down adjustability Each freestanding table receives power to surface accessory (2 simplex and 2 USB connections with 10 foot plug in power cord).

(1) Power to surface, 4 simplex and 2 USB connections, plug-in power w/ min. 6' cord Cable Management Trough

* Drawers - full extension

* Pencil tray in box drawer, 2 file converter in file drawer

Finish Options Height adjustable Worksurface: Patterned Laminate -Twill Neutral LBF Paint: Storage Satin Aluminum

MTR Characteristics See Attached

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0078 MTR: MD2, MSS2Knoll null

Unspecified Dividends Horizon Workstation, L-Shaped Modular Desking w/Bullet Peninsula, Right Hand Return, 72x84

72" 84" 30" No No No No No No No No

120 N/A N/A N/A 1-Phase Type B NEMA 5-15

None None None None

Quantity: 2

OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #409 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #410 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Additional Images:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0078

MTR: MD2, MSS2

Worksurface Base/Storage

MTR Characteristics MD2: Modular Desking System- HPL tops with Metal Components, Freestanding Salient Characteristics: To include minimum of the following specifications:

To include minimum of the following specifications:

a. Meet ANSI/BIFMA supporting loads.

b. HPL tops and components of minimum 1" thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.

c. Upper Storage component construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel door and shelf with front and rear channel to hold task light; rear back stop; full adjustable hinges (if applicable) or lift assist pneumatic flipper door opening; noise dampening closure and locks available. Mounting options shall be freestanding or wall mounted.

d. Pedestal and drawer construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel drawer fronts; full extension telescoping steel ball bearing suspension; integral filing rails; locking; available in 2 depths to fit under 24" and 30"d tops; BBF, FF, lateral file, multi-file, and Mobile pedestal configurations; and have 1" minimum adjustable floor glides with nylon foot.

Options:

a. Modesty panels offered in frosted glass, perforated metal, patterned acrylic or glazing options.

b. Door insert options of frosted or patterned acrylic and metal frame design.

c. Option for mounting shall be freestanding and wall mounted.

d. Drawer fronts and pulls to be field replaceable

MTR Category (Casegoods Modular Desking): GENERAL REQUIREMENTS FOR MODULAR DESKING SYSTEMS:

a. Available in a variety of configurations with non- handed options to make Single desks, L shape Desks, U-shaped stations, as well as storage components.

b. Coordinating Storage components to be utilized in waiting, conference, training, and other spaces to include wardrobe, storage towers, double door storage cabinets, low storage credenzas, TV cabinets, Mobile Pedestals, lateral files, and bookcases.

c. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost

d. Warranty: Limited lifetime

e. Surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes.

f. Vendor must be able to accommodate special requests and unique requirements such as custom sizes or cut to fit.

Project Location:

Contract / Order:

Submittal: Date Prepared:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0078

MTR: MD2, MSS2

MTR Characteristics (continued)

g. Master key must be available upon request

h. Contain a minimum 50% recycled content.

i. Meet SCS Indoor Air Quality standard.

MSS2: Storage, Underdesk - Pedestals and Files General Specifications:

a. To be constructed of 22 gauge or better cold rolled steel, painted metal frame with a formed 22 gauge or better sheet steel drawer case with powder coated paint finish.

b. Drawer fronts shall be of either ¾" minimum HPL over particleboard or painted metal with replaceable fronts.

c. File drawers shall have full extension telescoping, steel ball bearing suspension rated to hold 90 pounds minimum and Integral filing rails.

d. Leveling glides shall be standard with nylon foot pad adjustable up to 1".

e. All drawers shall be full box construction type.

f. Laminate storage case construction is not allowed as part of the modular systems furniture category. Refer to Modular Casegoods to find requirements for laminate case storage.

MTR Category (Modular Systems Furniture): GENERAL SPECIFICATIONS FOR ALL MODULAR SYSTEMS

a. HPL and Solid Surface top options.

b. ADA accessible countertop option.

c. Locks shall be standard. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet.

d. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost

e. A Master key shall be provided per job at no extra cost.

f. All surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes

g. Available in a variety of top shapes and sizes with coordinating storage components, transaction tops, and panels to support and divide space.

h. Meet Greenguard or equivalent Certification for low emission of VOC's and indoor air quality for office furnishings.

i. Manufactured in an ISO9001 certified plant.

j. System must be available on quick-ship program and lead times ranging from shipment 10 days after receipt to reserved manufacturing time.

k. The system must anticipate future change and ensure availability for a period of 5 years

l. All warranty items shall include, labor, traveling, parts, and shipping of items

m. Warranty: Limited lifetime of materials and workmanship except for 12 years on power components, glides, and panel fabrics with 5 years on lighting ballasts and lighting power supplies.

Project Location:

Contract / Order:

Submittal: Date Prepared:

Basis of Design Manufacturer:

Model #:

Model:

Vendor:

Nomenclature:

Width: Depth: Height: Weight:

Hot Water: Cold Water: Treated Water: Drain:

Vent: Seismic: Data: Emergency Power:

Volts: Amps: Watts:

Hertz: Phase: Plug:

Medical Gas: Non-Medical Gas:

Miscellaneous Gas:

Other Utility:

Main Image

Departments / Rooms (qty.):

Salient Characteristics U-shaped desk with bullet peninsula (30" x 72") and Right-hand return (24" x 42") and credenza (72" x 24")

(1) Electric Height Adjustable Freestanding work surface (24" x 42")

(1) Freestanding peninsula work surface(30" x 72") with modesty Panel

(1) Mobile Pedestal, Box/File with Lock Electrical components shall be UL Lift capacity - minimum 190 lbs including laminate top Leveling guides Powered with simple up/down adjustability Each freestanding table receives power to surface accessory (2 simplex and 2 USB connections with 10 foot plug in power cord).

(1) Power to surface, 4 simplex and 2 USB connections, plug-in power w/ min. 6' cord

* Drawers - full extension

* Pencil tray in box drawer, 2 file converter in file drawer Keyed Alike

Finish Options Height adjustable Worksurface: Patterned Laminate -Twill Neutral LBF Paint: Storage Satin Aluminum Integral Pull

MTR Characteristics See Attached

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0078B MTR: MD2, MSS2Knoll null

Unspecified Dividends Horizon Workstation, U-Shaped Modular Desking w/Bullet Peninsula, Right Hand Return 72x84

72" 100" - 102" 30" No No No No No No No No

120 N/A N/A N/A 1-Phase Type B NEMA 5-15

None None None None

Quantity: 3

OFFICE OF INSPECTOR GENERAL (OIG) / RAC Office #414 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #412 (1) OFFICE OF INSPECTOR GENERAL (OIG) / Standard Office #415 (1)

Project Location:

Contract / Order:

Submittal: Date Prepared:

Additional Images:

VA Member Services (MS) Atlanta IOTA 2233 Lake Park Drive, Smyrna, GA 30080, United States of America 36C77624P0029 / N/A

DS2 02/17/2025

E0078B

MTR: MD2, MSS2

Worksurface Leg/Storage Finish

MTR Characteristics MD2: Modular Desking System- HPL tops with Metal Components, Freestanding Salient Characteristics: To include minimum of the following specifications:

To include minimum of the following specifications:

a. Meet ANSI/BIFMA supporting loads.

b. HPL tops and components of minimum 1" thick particleboard or MDF with moisture balancing backing sheet, pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold or Thermoform edge in colors to match a variety of HPL tops to include solid colors, woodgrain, and flecked finished.

c. Upper Storage component construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel door and shelf with front and rear channel to hold task light; rear back stop; full adjustable hinges (if applicable) or lift assist pneumatic flipper door opening; noise dampening closure and locks available. Mounting options shall be freestanding or wall mounted.

d. Pedestal and drawer construction to be of 22 gauge cold rolled steel frame or better with powder coat paint; 18 gauge cold rolled steel or better sheet steel drawer fronts; full extension telescoping steel ball bearing suspension; integral filing rails; locking; available in 2 depths to fit under 24" and 30"d tops; BBF, FF, lateral file, multi-file, and Mobile pedestal configurations; and have 1" minimum adjustable floor glides with nylon foot.

Options:

a. Modesty panels offered in frosted…