MOTOR_GRADER_USED_2020_OR_NEWER2.pdf
PDF 229 KB Posted
- Attached to
- 237-20251231103344 BSAC
- Solicitation number
- 3170034711
- Issued by
- Alcorn County, Mississippi
About this file
This is a specification document for a motor grader equipment procurement issued by the Board of Supervisors of Amite County, Mississippi. The county seeks to purchase one used motor grader manufactured in 2020 or later with fewer than 3,500 operating hours. The equipment must meet EPA Final Tier 4 standards and include a turbocharged, six-cylinder diesel engine with 9.0 liter displacement and 235 HP. Key specifications include an articulated frame with safety lock, direct drive or auto-shift transmission with eight forward and six reverse speeds, minimum 55.7 GPM hydraulic pump capacity, 24-volt electrical system with 130-amp minimum alternator, 60-inch diameter circle with replaceable wear strips, 14-foot blade with hydraulic side shift and tip control, tandem drive with oil-immersed disc brakes, and 14.00-24 10-ply tires. The operator station must feature a low ROPS/FOPS air-conditioned cab with cloth-covered air suspension seat, three rear view mirrors, tilt steering wheel, and standard hydraulic controls. Additional requirements include a mid-mounted scarifier, minimum 104-gallon fuel tank capacity, backup alarm, operator warning system, parking brake, marker lights, driving lights, and work lights. Sealed bids were accepted until 10:00 A.M. on Monday of the specified deadline date.
Bidders must provide printed literature for the equipment offered and include the seller's company name, address, contact number, and signature on the bid form. A critical requirement is that bidders must have a certified parts and service center located within 50 miles of Liberty, Mississippi in Amite County. The cost proposal must include delivery to one of the county barns, and bidders shall provide an estimated delivery time. Any remaining available manufacturer warranty must be listed in the bid response. No pricing terms, set-asides, incumbent information, or funding sources are specified in this specification document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 237-20251231103344 BSAC.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for Motor Grader
Equipment offered for consideration must be Used 2020 or greater. Bidders shall include printed literature for the equipment offered.
The following specifications are considered minimum acceptable.
General: Machine shall have less than 3500 hours and no older than a 2020 model
Engine: Shall meet EPA Final Tier 4 standards
Engine shall be turbo-charged, six-cylinder diesel engine 9.0 liter with 235 HP
Flywheel HP
Machine shall be equipped with electronic over-speed protection to prevent the engine and transmission from over speeding as a standard feature
Engine shall have side doors for access
Ground level fueling and filling for diesel exhaust fluid shall be standard
Weight: Minimum 35220 lbs. without additional counterweight and mid mount scarifier
Frame: Articulated design with safety lock
Transmission: Direct drive full power shift or Auto shift with eight (8) forward and six (6) reverse speeds; Foot pedal operated accelerator and transmission shall have inching capability with foot pedal
The shift pattern shall be “U” shape or joystick controlled
Transmission shall be equipped with built in diagnostic capability
Hydraulics: Pump shall have a minimum of 55.7 GPM at maximum output; lock valves shall be integrated into main implement valve; hydraulic system shall have scarifier hydraulics Electrical: The electrical system shall be 24-volt system with minimum of a 130 amp
Alternator and master disconnect switch
Machine shall have a minimum of 1125CCA extra heavy-duty batteries
Circle: Minimum of 60 inches in diameter with replaceable wear strips; circle shall be rotated by a hydraulic driven motor
Blade: Minimum fourteen (14) feet in length, cutting edges, end bits and overlay bits;
Hydraulic side shift and tip control; 14’ long, 24” high by 7/8” thick
Drive: Tandem drive and oil immersed disc brakes; inboard mounted with multiple Disc brakes oil cooled and sealed
Tire/Wheels: 14.00-24 10 ply tires on 10” multi piece rims
Operator Station: The machine shall have standard hydraulic controls for blade functions and a tilt steering wheel required
The machine shall be equipped with three rear view mirrors, one interior and two exterior mounted
The machine shall have a low ROPS/FOPS air-conditioned cab
The machine shall be equipped with cloth covered air suspension seat with 3” Retractable seat belt and adjustments for support
Machine shall have air-conditioned cab with heater
General equipment: Scarifier, mid mounted with teeth
The machine shall be built by the manufacturer
Fuel tank capacity shall be no less than 104 US gallons
The machine shall have-backup alarm, Operator warning system, parking brake, rear drawback, front and rear marker lights, minimum of two (2) driving lights plus, six (6) additional work lights with front and rear turn signals, brake lights and hazard warning lights; tool box
Warranty: List remaining available warranty
Other: Bidder shall have a certified parts and service center located within 50 miles of Liberty, MS Amite County
Must give estimate time of delivery
Cost must include delivery to one of the county barns
Name of Company ____________________________________________________________
Address of Company __________________________________________________________
Contact Number ______________________________________________________________
Location of Service Center ______________________________________________________
Name of Seller _______________________________________________________________
Signature of Seller ____________________________________________________________
File details come from the government source that posted it. Updated .