Montague Armory - Renovate Armory TS to G100 Drawings.pdf

PDF 1 MB Posted Jul 19, 2023

Attached to: 511/23322. AGY; Montague Armory - Renovate Armory
Solicitation number: RFQ 171 230000000592 3
Issued by: Oakland County, Michigan Center CDP, Michigan

About this file

Written by GovTribe AI · Mar 14, 2026

Montague Armory Renovation Project Summary

This is a construction design document prepared by the Michigan Department of Technology, Management and Budget (DTMB) for the Michigan Department of Military and Veterans Affairs (DMVA) for the renovation of the Montague Armory located at 8601 Cook Street in Montague, Michigan. The project, identified as MDMVA Project No. 26C2024005, encompasses comprehensive interior and exterior improvements to the existing single-story armory facility. Interior improvements include renovation of bathroom, locker, and shower spaces; addition of a new lactation room; painting and refinishing of the drill hall with new drop ceiling; renovation of the physical training room; reconfiguration of unit storage area fencing with expansion of the vault area; and addition of a fire alarm system. Exterior improvements consist of force protection additions to the front of the building, reconfiguration and addition of new POV and GSA parking lots, creation of a new secure military parking area, and replacement of the existing fuel point with above-ground storage and dispensing equipment. The building is approximately 20,924 gross square feet with a total renovation area of approximately 2,187 square feet (10% of total building area). Bids for construction are solicited on a lump sum basis with no separate payments or adjustments unless specifically indicated in the plans or proposal, or when additional work is authorized in writing by the engineer.

The project is subject to the 2015 Michigan Building Code, 2015 Michigan Mechanical Code, 2018 Michigan Plumbing Code, and 2017 National Electrical Code. The contractor must obtain a soil erosion and sediment control notice to proceed from DMVA, LARA permits for all trades, and LARA review and permits for fuel dispensing and storage. The contractor is responsible for field verification of all dimensions and existing conditions, must maintain a knowledgeable representative on-site at all times, and must furnish all safety equipment required to meet OSHA requirements. The project requires completion of construction layout and staking approved by the engineer prior to construction commencement, installation of erosion control measures prior to demolition or construction, and clearing and grubbing of the entire grading limits area. Project contact information includes Kurt Maiberger (Project Manager) at (517) 481-7551 and Adam Pohl (Building Construction Project Superintendent) at (517) 290-4990.

View the file

Other files

File	Type	Posted
Montague Armory - Renovate Armory C1 to C8.1 Drawings.pdf	PDF	Jul 19, 2023
26C2024005 Renovate Armory Montague Mandatory Pre bid sign in sheet 7_11_2023.pdf	PDF	Jul 19, 2023
Montague Armory - Renovate Armory M1 to M5 Drawings.pdf	PDF	Jul 19, 2023
Montague Armory - Renovate Armory A010 to A920 Drawings.pdf	PDF	Jul 19, 2023
Montague Armory - Renovate Armory E010 to E107 Drawings.pdf	PDF	Jul 19, 2023
Montague Armory - Renovate Armory Advertisement.pdf	PDF	Jul 19, 2023
Montague Armory - Renovate Armory Specifications.pdf	PDF	Jul 19, 2023
26C2024005 Renovate Armory Montague Addendum 1.pdf	PDF	Jul 19, 2023
26C2024005 Renovate Armory Montague Mandatory Pre Bid Meeting Minutes 7_11_2023.pdf	PDF	Jul 19, 2023
Montague Armory - Renovate Armory P100 to P110 Drawings.pdf	PDF	Jul 19, 2023

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

8,0

GALLO

DIESEL F

UEL T

ANK

CJ.

MONTAGUE, MICHIGAN

MICHIGAN DEPARTMENT OF

MDMVA PROJECT NO. 26C2024005

RENOVATE ARMORY

MILITARY AND VETERANS AFFAIRS

MONTAGUE ARMORY

TS - TITLE SHEET/OVERALL LOCATION PLAN

G100 - CODE SHEET

C1 - DEMOLITION PLAN

C2 - SITE PLAN

C3 - GRADING PLAN

C4 - DETAILS, FENCING

C5 - DETAILS, MISC

C6- FUEL POINT

C7- LOADING RAMP, MISC. DETAILS

C8 - SESC PLAN

C8.1 - SESC PHASING PLAN

A010 - DEMO PLAN

A011 - DEMO PLAN

A100 - FLOOR PLAN

A115 - FLOOR PLAN

A300 - DETAILS

A600 - VAULT PLAN

A601 - VAULT SECTION AND DETAILS

A900 - REFLECTIVE CEILING PLAN

A901 - REFLECTIVE CEILING PLAN

A915 - FINISH AND HARDWARE PLAN

A920 - SIGNAGE PLAN

M1.0 - DEMO PLAN

M2.0 - HVAC PLAN

M3.0 - DETAILS AND SCHEDULES

M4.0 - ENERGY MANAGEMENT PLAN

M5.0 - ENERGY MANAGEMENT SCHEDULES & DETAILS

E010 - ELECTRICAL SITE PLAN

E100 - LATRINE, LACTATION ELECTRICAL PLAN

E101 - PT, OFFICE ELECTRICAL PLAN

E102 - SUPPLY DEMO ELECTRICAL PLAN

E103 - SUPPLY ELECTRICAL PLAN

E104 - DRILL DEMO ELECTRICAL PLAN

E105 - DRILL ELECTRICAL PLAN

E106 - ONE LINE, PANELS

E107 - FIRE ALARM PLAN

P100 - UG PLUMBING PLAN

P110 - AG PLUMBING PLAN

C O

R U

O N

R D

O R

O D

N O

R M

O R

- M

O N

U E

D R

C H

E O

F M

O F

H N

G Y, M

B U

D G

O C

U R

D R

A D

N D

N A

N D

C O

R U

O N

, R A, D

O F

D V

M O

G U

M O

R Y

O N

U E, M

U N

AutoCAD SHX Text

FLAG

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text

1. BIDS FOR CONSTRUCTION OF ALL WORK SHOWN ON THE PLANS ARE BIDS FOR CONSTRUCTION OF ALL WORK SHOWN ON THE PLANS ARE SOLICITED ON A LUMP SUM BASIS. NO SEPARATE PAYMENT OR ADJUSTMENTS TO THE LUMP SUM BID WILL BE MADE UNLESS SPECIFICALLY INDICATED ON THE PLANS AND IN THE PROPOSAL OR WHEN ADDITIONAL WORK IS AUTHORIZED IN WRITING BY THE ENGINEER. 2. THE CONTRACTOR SHALL IMMEDIATELY NOTIFY THE DESIGN ENGINEER OF THE CONTRACTOR SHALL IMMEDIATELY NOTIFY THE DESIGN ENGINEER OF ANY DEVIATION FROM THIS PLAN. 3. THE CONTRACTOR AND HIS SUBCONTRACTORS AND/OR SUPPLIERS ARE THE CONTRACTOR AND HIS SUBCONTRACTORS AND/OR SUPPLIERS ARE RESPONSIBLE FOR VISITING THE SITE PRIOR TO BIDDING TO VERIFY ALL EXISTING CONDITIONS AND DIMENSIONS. 4. THE CONTRACTOR SHALL HAVE A KNOWLEDGEABLE REPRESENTATIVE ON THE CONTRACTOR SHALL HAVE A KNOWLEDGEABLE REPRESENTATIVE ON SITE AT ALL TIMES DURING WORK UNDER THIS CONTRACT. THIS REPRESENTATIVE SHALL HAVE ON SITE, HIS OWN COPY OF THE CONTRACT SPECIFICATIONS, DRAWINGS AND DMVA APPROVED SHOP DRAWINGS. 5. CONTRACTOR TO FIELD VERIFY ALL DIMENSIONS. ANY DISCREPANCIES CONTRACTOR TO FIELD VERIFY ALL DIMENSIONS. ANY DISCREPANCIES BROUGHT TO THE OWNER'S ATTENTION. 6. PRIOR TO THE START OF CONSTRUCTION, CONTRACTOR TO VERIFY PRIOR TO THE START OF CONSTRUCTION, CONTRACTOR TO VERIFY CONDITION OF EXISTING CONSTRUCTION. DOCUMENT ANY EXISTING CONDITION THAT COULD BE MISCONSTRUED AS DAMAGED DURING NEW CONSTRUCTION. NOTIFY THE GOVERNMENT OF EXISTING CONDITIONS IN WRITING PRIOR TO THE COMMENCEMENT OF WORK. 7. DRAWINGS ARE NOT TO BE SCALED FOR ANY DIMENSIONS. DRAWINGS ARE NOT TO BE SCALED FOR ANY DIMENSIONS. 8. ALL WORK MUST COMPLY WITH THE DRAWINGS AND SPECIFICATIONS, ANY ALL WORK MUST COMPLY WITH THE DRAWINGS AND SPECIFICATIONS, ANY REVISIONS REQUIRED DUE TO FIELD CONDITIONS MUST BE REVIEWED AND APPROVED BY THE PROJECT MANAGER PRIOR TO CONSTRUCTION. 9. CONTRACTOR TO FURNISH ALL SAFETY EQUIPMENT REQUIRED TO MEET CONTRACTOR TO FURNISH ALL SAFETY EQUIPMENT REQUIRED TO MEET OSHA SAFETY REQUIREMENTS AND BE RESPONSIBLE FOR USE BY THEIR EMPLOYEES. 10. CONTRACTOR SHALL CLEAN AREA OF WORK AT THE END OF EACH CONTRACTOR SHALL CLEAN AREA OF WORK AT THE END OF EACH WORKDAY. 11. CLEAR AND GRUB ENTIRE GRADING LIMITS AREA.CLEAR AND GRUB ENTIRE GRADING LIMITS AREA.

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

MONTAGUE, MI

AutoCAD SHX Text

MONTAGUE CITY ARMORY

AutoCAD SHX Text

VICINITY MAP

AutoCAD SHX Text

VICINITY MAP

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text N

AutoCAD SHX Text

KAB'17

AutoCAD SHX Text

KNOW WHAT'S BELOW. CALL BEFORE YOU DIG.

AutoCAD SHX Text

8601 COOK STREET

AutoCAD SHX Text

AREA OF WORK MAP

AutoCAD SHX Text 1" = 50'

AutoCAD SHX Text N

AutoCAD SHX Text

SITE WORK NOTES

AutoCAD SHX Text

1. ALL CONSTRUCTION LAYOUT SHALL BE COMPLETED BY CONTRACTOR ALL CONSTRUCTION LAYOUT SHALL BE COMPLETED BY CONTRACTOR APPROVED BY ENGINEER PRIOR TO CONSTRUCTION. CONTRACTOR SHALL STAKE ALL RADIUS POINTS FOR INSPECTION PRIOR TO WORK. 2. INSTALL ALL SILT FENCE, CHECK DAMS, RIP RAP, AND ANY OTHER INSTALL ALL SILT FENCE, CHECK DAMS, RIP RAP, AND ANY OTHER SOIL EROSION & SEDIMENTATION CONTROL MEASURES PRIOR TO DEMOLITION OR CONSTRUCTION. 3. UNLESS SPECIFICALLY NOTED FOR REMOVAL ON THE PLANS, ALL UNLESS SPECIFICALLY NOTED FOR REMOVAL ON THE PLANS, ALL SIDEWALKS DRIVES, PAVEMENT, CULVERTS, GUARDRAILS, AND UTILITIES SHALL BE PROTECTED. ANY ITEMS DAMAGED OR DESTROYED DURING CONSTRUCTION SHALL BE REMOVED AND REPLACED INCIDENTAL TO CONSTRUCTION. 4. REMOVE ALL TOPSOIL & VEGETATION WITHIN THE GRADING LIMITS REMOVE ALL TOPSOIL & VEGETATION WITHIN THE GRADING LIMITS SHOWN (ASSUME 6" OF TOPSOIL). STOCKPILE TO TO AN AGREED ASSUME 6" OF TOPSOIL). STOCKPILE TO TO AN AGREED ). STOCKPILE TO TO AN AGREED UPON LOCATION, GRADE AREA TO PLAN, THEN RE-SPREAD 3" OF TOPSOIL OVER ENTIRE AREA AROUND NEW GRAVEL ROAD AND PARKING AREA. ANY ADDITIONAL TOPSOIL CAN BE LEFT ON SITE AT A DESIGNATED AREA (ASSUME ONE MILE TRUCKING ONE WAY). 5. RESTORE ALL DISTURBED LAWN AREAS WITH TOPSOIL, FERTILIZER, RESTORE ALL DISTURBED LAWN AREAS WITH TOPSOIL, FERTILIZER, SEED AND MULCH BLANKET. ALL TOPSOIL SHALL BE FURNISHED. 6. IN AREAS WHERE THERE IS FUTURE PARKING SHOWN DO NOT PLACE IN AREAS WHERE THERE IS FUTURE PARKING SHOWN DO NOT PLACE DO NOT PLACE PLACE TOPSOIL AND SEED, COMPACT ENTIRE AREA IN NO MORE THAN 12" LIFTS WITH VIBRATORY ROLLER.

AutoCAD SHX Text

PERMIT REQUIREMENTS

AutoCAD SHX Text

1. SOIL EROSION AND SEDIMENT CONTROL NOTICE TO PROCEED FROM THE SOIL EROSION AND SEDIMENT CONTROL NOTICE TO PROCEED FROM THE MICHIGAN DEPARTMENT OF MILITARY AND VETERANS AFFAIRS. 2. LARA PERMITS FOR ALL TRADES. LARA PERMITS FOR ALL TRADES. 3. LARA REVIEW AND PERMITS FOR FUEL DISPENSING AND STORAGE.LARA REVIEW AND PERMITS FOR FUEL DISPENSING AND STORAGE.

AutoCAD SHX Text

SHEET INDEX

AutoCAD SHX Text

CONTACT INFORMATION

AutoCAD SHX Text PROJECT MANAGER KURT MAIBERGER (517) 481-7551 MAIBERGERK@MICHIGAN.GOV BUILDING CONSTRUCTION PROJECT SUPERINTENDENT ADAM POHL (517) 290-4990 POHLA4@MICHIGAN.GOV

AutoCAD SHX Text

TUEBOR

AutoCAD SHX Text U

AutoCAD SHX Text S

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text U

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text

KAB

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text U

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text S

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text M

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text P

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text M

AutoCAD SHX Text U

AutoCAD SHX Text N

OFFICEB 467 SF 5 P

OCCUPANCY TYPE ROOM FUNCTION

ROOM AREA ROOM POPULATION

IN REQ'D

72 IN PROV

EXIT

OCCS DOOR EGRESS POPULATION

DOOR EGRESS CAPACITY

PHYSICAL TRAINING B 787 SF 8 P

DRILL HALLA-3 6278 SF 299 P

COMMS1 232 SF 1 P

SUPPLYS1 2060 SF 7 P

SUPPLY OFFICES1 161 SF 1 P

VAULTS1 502 SF 2 P

CHAIR AND TABLES1 649 SF 3 P

PESS1 2138 SF 8 P

MECHANICALB 487 SF 5 P

MAINTENANCEB 207 SF 3 P

KITCHENB 338 SF 4 P

PANTRY #2B 127 SF 2 P

SCULLERYB 152 SF 2 P

COLD STORAGEB 112 SF 2 P

LACTATIONB 52 SF 1 P

PANTRYB 139 SF 2 P

ADMINISTRATIONB 487 SF 5 P

MENS SHOWERB 383 SF 4 P

WOMENS SHOWERB 238 SF 3 P

WOMENS LATRINEB 262 SF 3 P

MENS LATRINEB 375 SF 4 P

VESTIBULEB 64 SF 1 P

OFFICEB 154 SF 2 P

TRAINING NCOB 246 SF 3 P

ADMINISTRATIONB 507 SF 6 P

RECRUITERB 240 SF 3 P

CLASSROOMB 607 SF 7 P

LIBRARYB 122 SF 2 P

CORRIDORB 317 SF 4 P

CORRIDORB 379 SF 4 P

CORRIDORB 129 SF 2 P

72 IN PROV

EXIT

23.2 IN REQ'D

116 OCCS

36 IN PROV

EXIT

.6 IN REQ'D

3 OCCS

36 IN PROV

EXIT

.8 IN REQ'D

4 OCCS

36 IN PROV

EXIT

17.8 IN REQ'D

89 OCCS

36 IN PROV

EXIT

17.8 IN REQ'D

89 OCCS 36 IN PROV

EXIT

.8 IN REQ'D

4 OCCS

36 IN PROV

EXIT

.8 IN REQ'D

4 OCCS

36 IN PROV

EXIT

19 IN REQ'D

95 OCCS

36 IN PROV

EXIT

.6 IN REQ'D

3 OCCS

AX . TR

AVEL D

ISTAN

E 114 FT

AX . TR

AVEL D

ISTAN

E 95 FT

AX . TR

AVEL D

ISTAN

E 96 FT

TOTAL MAX . TRAVEL DISTANCE 171 FT

MAX . TRAVEL DISTANCE 86 FT

C O

R U

O N

R D

O R

O D

N O

R M

O R

- M

O N

U E

D R

C H

E O

F M

O F

H N

G Y, M

B U

D G

O C

U R

D R

A D

N D

N A

N D

C O

R U

O N

, R A, D

O F

D V

M O

G U

M O

R Y

O N

U E, M

U N

AutoCAD SHX Text

GRIDDLE

AutoCAD SHX Text

RANGE (NIC)

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

COUNTER

AutoCAD SHX Text

EX. 4" FD

AutoCAD SHX Text

REFRIGERATOR

AutoCAD SHX Text

REFRIGERATOR

AutoCAD SHX Text

VAULT

AutoCAD SHX Text

SUPPLY 2115 SQ FT

AutoCAD SHX Text

500 SQ FT

AutoCAD SHX Text

COMM

AutoCAD SHX Text

NBC

AutoCAD SHX Text

SUPPLY OFFICE

AutoCAD SHX Text PROJECT DIRECTOR/ARCHITECT/OWNER DEPARTMENT OF MILITARY & VETERANS AFFAIRS RESERVE FORCES SUPPORT CENTER 3423 N.MARTIN LUTHER KING JR BLVD LANSING, MICHIGAN 48906 MR. KURT MAIBERGER P.E. PH: (517) 481-7551 FAX: (517) 481-7549 EMAIL: MAIBERGERK@MICHIGAN.GOV APPLICABLE CODES 2015 MICHIGAN BUILDING CODE 2015 MICHIGAN MECHANICAL CODE 2018 MICHIGAN PLUMBING CODE 2017 NATIONAL ELECTRICAL CODE OTHERS AS DETERMINED BY THE AUTHORITY HAVING JURISDICTION OR BY REFERENCE DEFERRED SUBMITTALS TO BE DESIGNED AND SUBMITTED BY GENERAL CONTRACTOR TO THE ARCHITECT: FUEL DISPENSING SYSTEM

AutoCAD SHX Text BUILDING DESCRIPTION NUMBER OF STORIES: ONE. BUILDING FUNCTION: BUILDING CONSISTS OF STORAGE AREAS FOR SUPPLIES AND PERSONAL EQUIPMENT, CLASSROOMS, OFFICE SPACE, DRILL HALL, KITCHEN, PHYSICAL TRAINING, LOCKER ROOM/SHOWERS, AND BATHROOMS. AREAS: 1ST FLOOR: 20,924 SQ.FT. GROSS 20,924 SQ.FT. GROSS TOTAL BUILDING: 20,924 SQ.FT. GROSS TOTAL BUILDING HEIGHT: 23' +/- FROM GRADE CONSTRUCTION OF BUILDING: BUILDING STRUCTURE: CMU WALL / CONCRETE FLOOR SLABS / STEEL TRUSS FOR ROOF. EXTERIOR WALL: BRICK MASONRY OVER CMU. TYPE OF CONSTRUCTION: TYPE IIB THERE IS NO FIRE SUPPRESSION SYSTEM WITHIN THE BUILDING. THERE IS NO FIRE ALARM SYSTEM FOR THE EXISTING ARMORY BUILDING. FIRE ALARM SYSTEM WILL BE ADDED AS PART OF THIS PROJECT. PROJECT DESCRIPTION INTERIOR IMPROVEMENTS TO AN EXISTING FACILITY: RENOVATE BATHROOM, LOCKER, AND SHOWER SPACE. A NEW LACTATION ROOM WILL BE ADDED FROM AN AREA THAT IS CURRENTLY USED AS FOOD REFRIGERATION AREA. DRILL HALL TO BE PAINTED, FLOOR GROUND/POLISHED, NEW DROP CEILING. PHYSICAL TRAINING ROOM TO BE RENOVATED. UNIT STORAGE AREA FENCING TO BE RECONFIGURED WITH VAULT AREA TO BE EXPANDED. EXTERIOR IMPROVEMENTS INCLUDE THE FOLLOWING: ADD FORCE PROTECTION TO FRONT OF BUILDING. RECONFIGURE AND ADD NEW POV AND GSA PARKING LOTS. ADD NEW SECURE MILITARY PARKING AREA. REPLACE FUEL POINT WITH ABOVE GROUND STORAGE AND DISPENSER.

AutoCAD SHX Text PROJECT INFORMATION JURISDICTION: MICHIGAN DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS. OCCUPIED BY A SINGLE TENANT AGENCY MIXED USE BUILDING FIRST FLOOR 20,924 SF S-1 MODERATE-HAZARD STORAGE AREA #1 (2,955 SF) AREA #1 (2,955 SF) AREA #1 (2,955 SF) AREA #2 (2,935 SF) B - BUSINESS USE AREA #1 (787 SF) AREA #1 (787 SF) AREA #2 (7,142 SF) A-3 ASSEMBLY AREA #1 (7,105 SF) AREA #1 (7,105 SF) SQUARE FOOTAGE OF RENOVATION TOTAL FIRST FLOOR AREA: 20,924 SF TOTAL AREA OF RENOVATION: 2,187 SF PERCENTAGE OF RENOVATION: 10% OCCUPANCY CALCULATIONS PER DESIGN OCCUPANT LOAD PER MBC TABLE 1004.1.2 FIRST FLOOR: 5,890 SF/ 300 (STORAGE AREAS) = 20 PEOPLE, 7,929 SF/ 100 (BUSINESS) = 80 PEOPLE, 7,105 / 15 (ASSEMBLY) = 474 PEOPLE, OCCUPANT LOAD WILL BE LIMITED 299 PEOPLE AS ALLOWED PER BUILDING OFFICIAL PER 1004.1.2 WITH SIGNAGE POSTED PER 1004.3. TOTAL DESIGN OCCUPANT LOAD: 399 ACTUAL OCCUPANT LOAD = 7 DAILY, 155 WEEKEND FIRE SUPPRESSION/SEPARATION FIRE SPRINKLER THERE IS NOT A CHANGE IN USE OF THE BUILDING. THEREFORE A FIRE SPRINKLER SYSTEM IS NOT REQUIRED PER MBC 903.2.1 THROUGH 903.2.12. FIRE ALARM A FIRE ALARM SYSTEM IS NOT REQUIRED IN THIS BUILDING PER MBC 907.2. INTERIOR FINISHES ALL INTERIOR FINISH MATERIALS SHALL BE CLASS A: FLAME SPREAD 0-25; SMOKE DEVELOPED 0-450. SEPARATION OF MIXED OCCUPANCIES PER MBC TABLE 508.4: SEPARATION BETWEEN USE GROUP S-1 AND B: NO SEPARATION (W/O SPRINKLERS) 2-HOUR PROVIDED SEPARATION BETWEEN USE GROUP ASSEMBLY AND B: 2 HOUR (W/O SPRINKLERS) 2-HOUR PROVIDED SEPARATION BETWEEN USE GROUP ASSEMBLY AND S-1: 1 HOUR (W/O SPRINKLER) 2-HOUR PROVIDED PLUMBING REQUIREMENTS REQUIRED PLUMBING FIXTURES PER TABLE MPC 403.1 FOR MEN'S AND WOMEN'S TOILET ROOMS IN FIRST FLOOR. FIXTURE COUNT REQUIRED FIXTURE COUNT PROVIDED FIXTURE COUNT PROVIDED WATER CLOSETS (WC) ASSEMBLY 150 / 125 = 1.20 WC MEN 150 / 125 = 1.20 WC MEN 150/ 65 = 2.31 WC WOMEN BUSINESS 40/ 25 = 1.6 WC MEN 40/ 25 = 1.6 WC MEN 40/ 25 = 1.6 WC WOMEN STORAGE 10/ 100 = .10 WC MEN 10/ 100 = .10 WC MEN 10/ 100 = .10 WC WOMEN TOTAL 2.9 WC MEN 3 WC PLUS 3 URINALS COMPLIES 2.9 WC MEN 3 WC PLUS 3 URINALS COMPLIES 3 WC PLUS 3 URINALS COMPLIES COMPLIES 4.0 WC WOMEN 4 WC COMPLIES 4 WC COMPLIES COMPLIES LAVATORIES (LAV) ASSEMBLY 1 PER 200 = .75 EACH BUSINESS 1 PER 40 = 1.0 EACH 1 PER 40 = 1.0 EACH STORAGE 1 PER 100 = .10 EACH 1 PER 100 = .10 EACH TOTAL 1.85 LAV EACH 3 MEN, 2 WOMEN COMPLIES1.85 LAV EACH 3 MEN, 2 WOMEN COMPLIES3 MEN, 2 WOMEN COMPLIESCOMPLIESDRINKING FOUNTAINS ASSEMBLY 1 PER 500 = .60 1 PER 500 = .60 BUSINESS 1 PER 100 = .73 1 PER 100 = .73 STORAGE 1 PER 1000 = .02 1 PER 1000 = .02 TOTAL 1.35 2 COMPLIES 1.35 2 COMPLIES 2 COMPLIES COMPLIES EGRESS REQUIREMENTS EGRESS WIDTH (PER SECTION 1005.1) REQUIRED EXIT WIDTH PER OCCUPANT =0.2" COMPLIES - SEE DOOR LOCATIONS ON LIFE SAFETY PLAN. MINIMUM NUMBER OF EXITS: 1 EXIT REQUIRED FROM COMPANY SPACE SINCE BUSINESS OCCUPANT LOAD < 49 (ACTUAL 2-32) AND STORAGE OCCUPANT LOAD IS < 29 (ACTUAL 3-10) MAXIMUM LENGTH OF COMMON PATH OF TRAVEL DISTANCE PER MBC TABLE 1016.1.2 100 FEET IN STORAGE (WITHOUT SPRINKLER SYSTEM) - COMPLIES - SEE SAFETY PLAN 100 FEET IN BUSINESS (WITHOUT SPRINKLER SYSTEM) - COMPLIES - SEE SAFETY PLAN MAXIMUM LENGTH OF EXIT ACCESS TRAVEL DISTANCE IS 75 FEET (WITHOUT SPRINKLERS) PER MBC TABLE 1017.2. A AND S1 - 200 FEET (WITHOUT SPRINKLER SYSTEM) - COMPLIES - SEE SAFETY PLAN 200 FEET (WITHOUT SPRINKLER SYSTEM) - COMPLIES - SEE SAFETY PLAN B - 200 FEET IN WITHOUT SPRINKLER SYSTEM) - COMPLIES - SEE SAFETY PLAN DEAD END CORRIDOR MAXIMUM LIMIT IS 20 FEET (WITHOUT SPRINKLERS) PER MBC 1018.4 WHERE MORE THAN ONE EXIT IS REQUIRED - COMPLIES, ONLY ONE EXIT IS REQUIRED FROM EACH SPACE - SEE SAFETY PLAN

AutoCAD SHX Text

USE AREA A-3

AutoCAD SHX Text

2-HOUR FIRE RATED WALL

AutoCAD SHX Text

USE B AREA #1

AutoCAD SHX Text

USE B AREA #2

AutoCAD SHX Text

USE B AREA #2

AutoCAD SHX Text

USE S-1 AREA #1

AutoCAD SHX Text

USE S-1 AREA #2

AutoCAD SHX Text

USE A-3 AREA #1

AutoCAD SHX Text

USE AREA B

AutoCAD SHX Text

USE AREA S-1

AutoCAD SHX Text

TRAVEL DISTANCE

AutoCAD SHX Text

TUEBOR

AutoCAD SHX Text U

AutoCAD SHX Text S

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text U

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text

KAB

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text U

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text S

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text M

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text P

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text M

AutoCAD SHX Text U

AutoCAD SHX Text N

File details come from the government source that posted it. Updated Mar 12, 2026.