MB484555_Questions_and_Answers.pdf
PDF 186 KB Posted
- Attached to
- Seamless 21-6-9 Tubing
- Solicitation number
- MB484555
- Issued by
-
Department of Energy Office of Science
About this file
This is a Question and Answer document for procurement opportunity MB484555, issued by Brookhaven National Laboratory (managed by Brookhaven Science Associates for the U.S. Department of Energy) on October 27, 2026. The procurement concerns seamless 21-6-9 stainless steel tubing with quotes due by November 10, 2026, at 5:00 PM ET to MBRYAN@BNL.GOV.
Key specifications and terms include: 42-foot straight lengths with tolerance of 42' -6"/+12" (BNL may consider lengths as small as approximately 40 feet but cannot accept substantially shorter lengths); standard ASTM A269 outside diameter and wall tolerances apply; tubing certified to ASTM A269/A269M-25 or AMS 5562 is acceptable, with annealed tubing preferred over cold-worked; foreign-origin offers will be considered; extended lead times associated with mill runs are acceptable, with proposals aiming for delivery as fast as reasonably possible given manufacturing constraints; shipment is at BNL's expense with delivery to Building 98, Rochester Street, Upton, NY 11973 (foreign shipments should include shipping costs in the firm-fixed price quote, with BNL using Interfreight as broker; domestic shipments will be handled via BNL's LTL/freight carrier accounts). Quotes must remain valid for 45 days and may be submitted on offerors' standard templates; partial shipments are acceptable. Documentation requirements include a certificate of conformance with chemical analysis of the lot and dimensional check; a mill test report to EN 10204 3.1 or equivalent is acceptable. No certificate of insurance is required for this supply-only order, and no specific quote form is mandated.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - Statement of Work 484555.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
managed by Brookhaven Science Associates for the U.S. Department of Energy www.bnl.gov
October 27, 2026
MB484555 Question and Answer Document Seamless 21-6-9 Stainless Tubing
Questions and Responses
No. Question and BNL Response
1 Question: The SOW leaves price and lead time to the PO (item 8), and no delivery date is stated. Is there a required delivery date? Seamless 21-6-9 in this size is usually a mill run, and mill quotes for this kind of order often run about 12 to 20+ weeks ARO. Will BNL accept the offeror's proposed lead time, and could you give delivery relief if needed?
BNL Response: Extended lead times that are associated with a mill run are acceptable. Proposal should aim to deliver as fast as reasonably possible given the manufacturing constraints.
2 Question: Will BNL accept tube certified to ASTM A269/A269M-25 and also to AMS 5562 (seamless 21-6- 9)? A269 calls for heat-treated (annealed) tube, while much aerospace 21-6-9 stock is cold-worked. Please confirm that annealed per A269 is required, or say whether cold-worked would also be acceptable.
BNL Response: BNL is open to accepting either specification. Annealed tubing is preferred.
3 Question: SOW item 4 asks for 42 ft straight lengths. Is there a length tolerance (for example, 42 ft +/- a stated amount)? If the mill cannot produce 42 ft, would BNL accept shorter straight lengths (for example, 20 to 25 ft) or random lengths with a stated minimum?
BNL Response: 42’ -6”/+12”. We may consider a few feet smaller (~40ft), but cannot accept substantially shorter length. Preference is to meet the full 42’ requirement.
4 Question: The notice asks for country of origin, and the BSA Commercial Terms include FAR 52.225-1. Is a domestic end product required (US melt and manufacture), or will BNL consider a foreign-origin offer if its country of origin is stated?
BNL Response: Foreign offers will be considered.
5 Question: SOW item 7 says shipment is at BNL's expense. Should we quote FOB origin with freight collect on a BNL carrier or account, or prepay and add freight as a separate line? Please also confirm the ship-to and receiving location (Bldg. 98, Rochester St, Upton, NY 11973). Because of the 42 ft lengths, this will need long-length LTL or flatbed freight.
BNL Response: If the quote is a foreign product shipping from outside the USA, the Offeror should include shipping costs in their firm-fixed price quote. BNL uses Interfreight as a broker for international shipments to handle import duties, taxes, etc. BNL would be listed as the importer of record. If this is a domestic product, BNL has accounts with LTL/freight carriers that would be included on the purchase order.
6 Question: We could not find any insurance requirement in the BSA General Terms for Commercial Products and Services (Rev. 25.0). Please confirm that no certificate of insurance is required for this supply-only order.
BNL Response: Confirmed.
7 Question: Please confirm quotes should be emailed to MBRYAN@BNL.GOV by November 10, 2026, 5:00 PM ET. Is there a required quote form or format? How long should quotes remain valid? Are partial
No. Question and BNL Response shipments acceptable?
BNL Response: Confirmed. No required form – you may submit on your standard quote template as long as it’s clear what you are offering to BNL. Quotes shall remain valid for 45 days. Partial shipments should be acceptable.
8 Question: Do the standard ASTM A269 OD and wall tolerances apply, or are tighter tolerances required?
BNL Response: Standard tolerances apply
9 Question: SOW item 5 calls for eddy current testing per A269. Will the eddy current test be accepted in place of the hydrostatic test (A269 allows either)? Is any other test required, such as hydrostatic, flare/flange, or hardness?
BNL Response: A certificate of conformance which includes a chemical analysis of the lot and a dimensional check is expected.
10 Question: Will BNL accept a mill test report to EN 10204 3.1 (or equivalent) as the chemical composition and inspection report, together with our Certificate of Conformance? Is an SDS required with delivery per Article 20(b) for this tube?
BNL Response: Yes, we will accept the mill test report. Would the SDS be for the metal itself or chemical used to process the material?
File details come from the government source that posted it. Updated .