Markar and Pemko Anti-Barricade Rescue Hardware Brochure.pdf

PEMKO

ANTI-BARRICADE

RESCUE HARDWARE

ASSA ABLOY designs and manufactures products to improve safety and mitigate risk in medical, behavioral health, and assisted living environments. Applications include patient rooms, patient bathrooms and cross corridor bathrooms.

Anti-barricade rescue hardware is the optimum solution to provide a safe way to rescue someone in the event the door is barricaded and not able to open. In an emergency the facility staff will be able to swing the door in the opposite direction, minimizing the risk of patients harming themselves.

Solutions

Pemko Double Swing Pin & Barrel Hinge DSH1000

Pemko Multi-Point Emergency Release Stop ERSMP

Pemko Emergency Release Stop ERS

Pemko Anti-Barricade Rescue Hardware

Applications

Standards ANSI/BHMA: A156.26 Grade 1-300 Certified (DSH1000)

ADA Compliance:

- ICC/ANSI A117.1-2009

Barrier Free Requirements

(DSH1000)

- ADAAG-2010

CMS Compliance:

- Eliminating additional ligature points ensures compliance for reimbursement through Centers for Medicare and Medicaid Services

Refer to the New York State Office of Mental Health (OMH) Patient Safety Standards for current product compliance.

MEDICAL FACILITIES

BEHAVIORAL HEALTH FACILITIES

ASSISTED LIVING FACILITIES

Rescue Hardware Operation

Door barricaded by a person or object that prevents the door from opening

A key is used to unlock the Emergency Release Stop from the locked position1. 2.

Emergency Release Stop opens to allow the door to swing in the opposite direction

Door opens outward in the opposite direction to allow quick and easy access to the patient3. 4.

Rescue Hardware Operation

Double Swing Hinge

ASSA ABLOY double swing hinges allow the door to swing in both directions with ease. The robust design supports heavy doors that may experience abuse.

Key Feature Highlight

Opens 100° in Either Direction: Door opens 100° in the typical direction. Disengaging the Emergency Release Stop allows the door to open 100° in the opposite direction providing access to the barricaded side of the opening.

Key Feature Benefit

Opens 100° in Either Direction Suites with Pemko Emergency Release Stop to create an anti-barricade opening

Built-In Stop Prevents finger pinching

Spans Opening Height Eliminates hinge side sight line

Security Torx Fasteners Prevents removal of hinge

Electrified SER Module Provides quick access to concealed wire transfer to power electrified hardware

1/8" Hinge Frame and Door Leaf Offset Eliminates ligature points across top of hinge

Gang Hole Pattern Supports door weight with large grouping of mounting holes at top of hinge

DSH1000 DSHP01

100°

1-3/4"

1-5/32"

3"

1-25/32"

2-1/2"

1-9/32"

100°

100°100°

1-3/4"

1-1/4"

3"

1-3/4"

15/16" 1-7/8"

19/32"

DSH1000 DSHP01

100°

1-3/4"

1-5/32"

3"

1-25/32"

2-1/2"

1-9/32"

100°

100°100°

1-3/4"

1-1/4"

3"

1-3/4"

15/16" 1-7/8"

19/32"

Double Swing Hinge

Key Feature Highlight 1/8" Hinge Frame and Door Leaf Offset: Top of hinge frame leaf is offset from top of door hinge leaf. Top of hinge frame leaf is mounted tightly up against the top of the opening to help eliminate ligature points at top of opening.

DSH1000 CONSTRUCTION

Key Feature Benefit

Pin & Barrel Design Continuous hinge design reduces stress on frame

6063-T6 Aluminum Alloy/Temper Strong, heavy-duty and durable grade aluminum

¼" Diameter Stainless Steel Rod Large diameter rod supports large and heavy doors

UHMW-PE Medical Bearings High quality bearing improves life and overall hinge function

Supports door weights up to 600 lbs

Note: Order form recommended, refer to Pemko How to Order Guide for Pemko and Markar Hinges

DSH1000

DSH1000 - In Opening

1/8

1/8

Double Swing Hinge with Serviceable Electrical Module (SER)

Removable electrified SER module with Molex connectors with Electrolynx® for quick and easy access to wires without removing door from frame

• Supplied with cable leads

- 48" (door)

- 180" (frame)

• Top mounted – Standard Location

- Custom location available upon request

(top of hinge to centerline of prep)

• Capable of carrying 6 amps continuous or 16 amps-in-rush at 24 volts for 820 milliseconds

ELECTRICAL MODIFICATIONS

Serviceable/Removable (SER) Module - 4 Wire SER4

Serviceable/Removable (SER) Module - 8 Wire SER8

Serviceable/Removable (SER) Module - 12 Wire SER12 DSH1000SER

Double Swing Hinge with Serviceable Electrical Module (SER)

DSH1000 SER Prep

(standard location shown below)

3/4''

1-1/2'' 3''

3/4''

1-1/2''

FRAME

DOOR

POCKET IN WOOD FRAME

(IF APPLICABLE)

POCKET IN WOOD DOOR

(IF APPLICABLE)

TOP VIEW

CL 1-3/4''

8-7/8"

TOP OF DOOR

TO CL OF DOOR PREP

1/8''

OFFSET

15-7/8''

Ø13/16'' MAX. HOLE

FOR METAL

FRAMES ONLY

3''

3/4''

FRAME HINGE

JAMB

of

DSH1000

7-1/4"

TOP OF OPENING

TO CL OF FRAME

PREP

FRAME

LEAF

DOOR LEAF

TOP OF FRAME

OPENING

of

DOOR

DOOR

3'' 3/4''

Ø13/16'' MAX.

HOLE

FOR METAL

DOORS ONLY

1-1/2" DEEP

POCKET

FOR WOOD

DOORS ONLY

CL CL

How to Order Double Swing Hinge

Model Length¹ Finish Electrical Modification

Location Top to Centerline²

Fasteners Frame Height

Door Undercut

DSH1000 84" C: BHMA 628

Clear Anodized

"Blank" :

None

"Blank":

Metal x Metal

120" SER8 WW:

Wood x Wood

SER12

96" CF:

Custom Finish

SER4 MW: Metal x Wood

Notes:

1. Length will be determined from frame height and undercut dimensions

2. Provide location or indicate "standard location". Standard location is top of hinge.

Examples:

DSH1000-84C x 84" Frame x 1/4" Undercut DSH1000-96C x SER12 x Standard Location x 95.5" Frame x 3/8" Undercut DSH1000-84C with completed order form attached DSH1000-96C x SER4 x 42" Top to CL x WW x 94" Frame x 1/4" Undercut

Note: Order form recommended, refer to Pemko How to Order Guide for Pemko and Markar Hinges.

DSH1000

Two ways to order

1. Purchase order with Hinge Model, Length, Finish, and completed

Markar/Pemko DSH_ x ERS_ order form (recommended)

2. Purchase order with Hinge Model, Length, Finish, Electrical Modification, Location

Top to Centerline, Fasteners, Frame Height, Door Undercut

Information Required with Order Form or Purchase Order

Emergency Release Stop

Model Length¹ Finish Electrical Modification

Location Top to Centerline²

Fasteners Frame Height

Door Undercut

DSH1000 84" C: BHMA 628

Clear Anodized

"Blank" :

None

"Blank":

Metal x Metal

120" SER8 WW:

Wood x Wood

SER12

96" CF:

Custom Finish

SER4 MW: Metal x Wood

Key Feature Benefit

Swing Away Door Stop Suites with double swing hinge to create anti-barricade opening

Hospital Tip Eliminates ligature point at top of hinge

Notch Cut-Outs Allows ERS to clear a variety of face mounted door hardware trim

Security Torx Fasteners Prevents removal of Emergency Release Stop

The Pemko Emergency Release Stop is used in combination with the double swing hinge to create a complete Anti-Barricade System.

In an emergency, the stop is discharged to allow the door to swing in the opposite direction. A torx security key is provided to release the stop from the locked position.

ERS: Top Flush Bolt locking into frame header

ERSMP: Multi-Point Latching into frame rabbet

ERS

ERSMP

1-31/32

ERS

23/32

25/32

ERS & ERSMP CONSTRUCTION

Key Feature Benefit

Geared Hinge Design Distributes load stress uniformly along length of ERS

6063-T6 Aluminum Alloy/Temper Strong, heavy-duty, durable grade aluminum

Polymer Thrust Bearing Eliminates premature wear and supports more weight

ERS Notch Allows for easier access to clear the lock trim

Torx Key Unlocks the ERS to swing away

1.750 [44]

WOOD DOOR

2.000 [51]

2.875 [73]

Notes:

1. Length will be determined from frame height and undercut dimensions.

2. Notch type is specified by factory based on locking hardware and trim.

3. ERSMP only available with one size notch (NBP).

4. Lock hardware trim over 7" in length requires a non-standard notch (NPXXL only);

additional charges will apply.

5. Locking hardware and trim and location top to centerline are required.

Examples:

ERS84C x HT x RH x 83-7/8" Frame x 3/8" Undercut ERSMP96C x HT x LH x NOTCH x Lock Hardware & Trim x 95" Frame x 1/4" Undercut ERS120C with completed order form attached

Two ways to order

1. Purchase order with ERS Model, Length, Finish, and completed

Markar/Pemko DSH_ x ERS_ order form (recommended)

2. Purchase order with ERS Model, Length, Finish, Hospital Tips, Handing, Lock

Hardware & Trim, Frame Height, Door Undercut Top to Centerline, Fasteners, Frame Height, Door Undercut

Information Required with Order Form or Purchase Order

Model Profile Length1 Finish Handing Locking Hardware & Trim & Location Top to Centerline7

Frame Height

Door Undercut

ERS "Blank" :

Flush Bolt

84" C: BHMA

628 Clear Anodized

MP:

Multi-Point

96" CF:

Custom Finish

120"

How to Order Emergency Release Stop

Note: Order form recommended, refer to Pemko How to Order Guide for Pemko and Markar Hinges.

NPL

NPXL

NBP

NPXXL

NB

7 3/8" (187)

3 3/8" (86)

3 3/8" (86)

15 3/8" (390)

9 1/8" (231)

NB

3 3/8" (86)

3 1/16" (78)

Corbin Russwin BLSS

NPL

NPXL

NBP

NPXXL

NB

7 3/8" (187)

3 3/8" (86)

3 3/8" (86)

15 3/8" (390)

9 1/8" (231)

NB

3 3/8" (86)

3 1/16" (78)

Corbin Russwin BLSS

Emergency Release Stop Notches

When the ERS/ERSMP stop is released from the locked position, the stop rotates out of the opening. To allow the stop to rotate freely from obstruction, a notch is required to clear the hardware trim on the door face. The ERS notches are designed to clear a variety of door hardware trim.

ERS: NPXXL and NBP

ERSMP: NBP only

3 3 8" (86)

Corbin Russwin BLSS

NBP

3 1 16" (78)

Emergency Release Stop Notches

A

NBP (NOTCH)

SCALE 1 : 1

DETAIL

CORBIN RUSSWIN

BHSS (Hardware)

Frame

DSH000

Double Swing Hinge

Door

ERS

Emergency Release Strike

A

Emergency Release Stop Frame Preparation

Frame preparation to accept the locking mechanism of the ERS and ERSMP.

ERS Frame Preparation: 3/8" hole in header (recommend to prep in field)

ERSMP Frame Preparation: Factory or In-field prepping

If field prepping:

- Using a 1/8" drill bit, drill pilot holes at the six locations shown in “Frame Preparation”

- As shown in the Drill Size diagram below, enlarge each hole using a 3/8" drill bit

- Enlarge the two center holes, using a 3/4" drill bit

- Each of the two preps should resembles the two preps shown in the Drill Size diagram

3/8" 3/4"

3/8"

3/8" 3/4"

3/8"

1/2"

63-11/16" 1/2" 1"

1"

21-1/16"

Frame Preparation

CL

CL

TOP OF DOOR OPENING

Drill Size

CL

3/8" 3/4"

3/8"

3/8" 3/4"

3/8"

1/2"

63-11/16" 1/2" 1"

1"

21-1/16"

Frame Preparation

CL

CL

TOP OF DOOR OPENING

Drill Size

CL

Template is for ERSMP only

Door Handing

The Emergency Release Stop will match the handing of the door. When the hinge is on the left and the door opens inward, the ERS will be left hand. When the hinge is on the right and the door opens inward, the ERS will be right hand.

DSH1000: Non-handed

ERS & ERSMP: Handed with hospital tip on top only

LEFT HAND

Hinges on Left Opens Inward

RIGHT HAND

Hinges on Right Opens Inward

Manufacturer reserves the right to make changes without formal notice.

DSH1000 x ERS_ - LEFT HAND LAYOUT

DOUBLE SWING 100DEG HINGE & ERS EMERGENCY RELEASE STOP

PEMKO Manufacturing Company Rev.3 - 10.10.18

Manufacturer reserves the right to make changes without formal notice.

DSH1000 X ERS_ - RIGHT HAND LAYOUT

DOUBLE SWING 100DEG HINGE & ERS EMERGENCY RELEASE STOP

PEMKO Manufacturing Company Rev.3 - 10.10.18

Hinge Clearance and Door Edges

Hinge Clearance Hinge clearance used to calculate door width ordering size DSH1000: 3" hinge clearance Lock-side: 1/8" minimum clearance Net door width = Opening width – 3 1/8"

Example: 36" – 3 1/8" = 32 7/8" net door width

Door Edges (recommendation) Hinge side: Square edge Lock-side: Beveled edge

3''

FRAME

DOOR

1-3/4''

3"

Clear Opening Widths

DSH1000

32-13/16" CLEAR OPENING

36'' FRAME OPENING

DSH1000 HINGE OPEN 100° WITH 32-7/8'' CLEARANCE

BETWEEN DOOR FACE AND ERS STOP

RIGHT HAND SHOWN FOR REFERENCE

DSH1000 HINGE OPEN 100° WITH 32'' CLEARANCE

BETWEEN DOOR FACE AND ERS STOP

RIGHT HAND SHOWN FOR REFERENCE

DSH1000 HINGE CLOSED WITH 1/8" MINIMUM CLEARANCE

BETWEEN DOOR EDGE AND CASE FRAME

RIGHT HAND SHOWN FOR REFERENCE

36'' FRAME OPENING

3''

1-15/16''1-7/8''

1-3/4''

31/32"

DSH PIVOT POINT

1/8'' MIN.

2''

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

1/8''

DSH1000

10°

2-3/8''

ERS

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

32'' CLEAR OPENING

35-5/32" FRAME OPENING

DSH1000

10°

2-3/8''

ERS

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

32-13/16" CLEAR OPENING

36'' FRAME OPENING

DSH1000 HINGE OPEN 100° WITH 32-7/8'' CLEARANCE

BETWEEN DOOR FACE AND ERS STOP

RIGHT HAND SHOWN FOR REFERENCE

DSH1000 HINGE OPEN 100° WITH 32'' CLEARANCE

BETWEEN DOOR FACE AND ERS STOP

RIGHT HAND SHOWN FOR REFERENCE

DSH1000 HINGE CLOSED WITH 1/8" MINIMUM CLEARANCE

BETWEEN DOOR EDGE AND CASE FRAME

RIGHT HAND SHOWN FOR REFERENCE

36'' FRAME OPENING

3''

1-15/16''1-7/8''

1-3/4''

31/32"

DSH PIVOT POINT

1/8'' MIN.

2''

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

1/8''

DSH1000

10°

2-3/8''

ERS

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

32'' CLEAR OPENING

35-5/32" FRAME OPENING

DSH1000

10°

2-3/8''

ERS

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

32-13/16" CLEAR OPENING

36'' FRAME OPENING

DSH1000 HINGE OPEN 100° WITH 32-7/8'' CLEARANCE

BETWEEN DOOR FACE AND ERS STOP

RIGHT HAND SHOWN FOR REFERENCE

DSH1000 HINGE OPEN 100° WITH 32'' CLEARANCE

BETWEEN DOOR FACE AND ERS STOP

RIGHT HAND SHOWN FOR REFERENCE

DSH1000 HINGE CLOSED WITH 1/8" MINIMUM CLEARANCE

BETWEEN DOOR EDGE AND CASE FRAME

RIGHT HAND SHOWN FOR REFERENCE

36'' FRAME OPENING

3''

1-15/16''1-7/8''

1-3/4''

31/32"

DSH PIVOT POINT

1/8'' MIN.

2''

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

1/8''

DSH1000

10°

2-3/8''

ERS

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

32'' CLEAR OPENING

35-5/32" FRAME OPENING

DSH1000

10°

2-3/8''

ERS

CASE FRAME

STRIKE SIDE

SINGLE RABBET

OPTIONAL

Frame Applications & Strike

Frame Applications:

Two types of frame applications are recommend for use with the double swing hinge and emergency release stop.

Application A: Eliminates the need for an extended lip strike (strike mounted on soffit) Hinge Jamb & Header: Cased open Lock-side Jamb: Single rabbet

ERS

LIP STRIKE

EXTENDED

DSH1000

2.5" THRU 3.0"

CASED

OPENED

JAMB

HINGE FRAME

REINFORCEMENT

CASED

OPENED

JAMB

HORIZONTAL

FRAME

STIFFENERS

APPLICATION: B

HINGE JAMB: CASED OPEN

HEADER JAMB: CASED OPEN

LOCK-SIDE JAMB: CASED OPEN

FRAME

ERS

HINGE FRAME

REINFORCEMENT

STRIKE

STIFFENERS

HORIZONTAL

APPLICATION: A

HINGE JAMB: CASED OPEN

HEADER: CASED OPEN

LOCK-SIDE JAMB: SINGLE RABBET DSH1000

2.5" THRU 3.0"

SINGLE

RABBET

JAMB CASED

OPENED

JAMB

Application B: Extended lip strike is needed Hinge Jamb, Lock-side Jamb & Header: Cased open

ERS

LIP STRIKE

EXTENDED

DSH1000

2.5" THRU 3.0"

CASED

OPENED

JAMB

HINGE FRAME

REINFORCEMENT

CASED

OPENED

JAMB

HORIZONTAL

FRAME

STIFFENERS

APPLICATION: B

HINGE JAMB: CASED OPEN

HEADER JAMB: CASED OPEN

LOCK-SIDE JAMB: CASED OPEN

FRAME

ERS

HINGE FRAME

REINFORCEMENT

STRIKE

STIFFENERS

HORIZONTAL

APPLICATION: A

HINGE JAMB: CASED OPEN

HEADER: CASED OPEN

LOCK-SIDE JAMB: SINGLE RABBET DSH1000

2.5" THRU 3.0"

SINGLE

RABBET

JAMB CASED

OPENED

JAMB

Strike:

Standard hardware strike is used to work with locking hardware *** No Double Lip Strike is needed for the DSH x ERS Anti-Barricade Solution***

Frame Reinforcement

EMERGENCY RELEASE STOP

DSH1000

DOUBLE SWING HINGE

HORIZONTAL

ERS

ERS FLUSH BOLT

FRAME STIFFENERS

ERS

NOTCH

HINGE FRAME

REINFORCEMENT

DSH1000

2.5" THRU 3.0"

HINGE FRAME

REINFORCEMENT

CASED

OPENED

JAMB

HORIZONTAL

FRAME

STIFFENERS

APPLICATION: B

HINGE JAMB: CASED OPEN

HEADER JAMB: CASED OPEN

LOCK-SIDE JAMB: CASED OPEN

ERS Flushbolt

Double Swing Hinge

DSH1000

Frame

Door

ERS

Emergency Release Stop

Reinforcement

Frame Stiffeners

Hinge Frame

Horizontal

ERS NBP (Notch)

Frame Applications:

Horizontal frame stiffeners are recommended to keep the hinge mounting surface flat when the door and hinge are mounted.

Vertical hinge reinforcement is recommended to prevent the hinge mounting screws from pulling out of the frame.

Note:

Follow the frame manufacturer's instructions for proper frame reinforcement

Compatible Rockwood Products

ASSA ABLOY offers a variety of ligature-resistant products that are free from sharp edges or potential catch points. These products, like those from Rockwood below, often feature rounded surfaces and low profiles in order to secure rooms in behavioral health environments without presenting potential safety hazards.

Rockwood 467-RKW and 468-RKW Heavy Duty Door Stops

Rockwood 406 Convex Wrought Wall Stop, Rockwood 409 Concave Wrought Wall Stop

Rockwood 94C Recessed Flush Pull Rockwood 592 Roller Latch

467-RKW

94C 592

468-RKW

Compatible Pemko Products

ASSA ABLOY offers a variety of ligature-resistant products that are free from sharp edges or potential catch points. These products, like those from Pemko below, often feature rounded surfaces and low profiles in order to secure rooms in behavioral health environments without presenting potential safety hazards.

P44

303_PK

P88

303_V

290_V

316_V

2891_V

Pemko P44 Perforated Adhesive Gasket

Pemko 303_PK Perimeter Gasket with Thermal Plastic Elastomer Insert

Pemko P88 Perforated Adhesive Gasket

Pemko 303_V Perimeter Gasket with Vinyl Insert

Pemko 290_V Perimeter Gasket with Vinyl Insert

Pemko 316_V Perimeter Gasket with Vinyl Insert

Pemko 2891_V Perimeter Gasket with Vinyl Insert

Copyright © 2020-2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. Printed in the U.S.A. 80134 5293 8/23

Memphis, TN USA P: 800 824 3018 F: 800 243 3656

Ventura, CA USA P: 800 283 9988 F: 800 283 4050

Vaughan, ON CA P: 800 461 3007 F: 800 461 8989

Pemko 5535 Distribution Dr.

Memphis, TN 38141 www.pemko.com orders.pemko@assaabloy.com