06 40 50 Solid Phenolic Resin Panel Fabrication 06 65 10 Solid Surface Fabrication - Product Data Color Samples.pdf

by Spec Section and Subsection

Submittal Transmittal

SYR VA - 7th FLOOR, MENTAL HEALTH Project # 200903

800 Irving Ave Syracuse, NY 13210

Tel: Fax:

Date: 6/17/2010 Reference Number: 0210

Transmitted To: Transmitted By: Dillon YoungKristine Dwyer

FRANCIS CAUFFMAN 229 CONSTRUCTORS

2120 Arch St Philadelphia, PA 19103 Tel: (215) 568-8250 Fax: (215) 568-2639

229 Wolf St Syracuse, NY 13208 Tel: (315) 476-4831

Submittal Package No Description Due Date Package ActionQty

7/1/201006 40 50 Solid Phenolic Resin Panel Fabrication & 06 65 10 Solid Surface Fabrication - Product Data & Color Samples

0084 - - 01

Transmitted For Delivered Via Tracking Number

EmailApproval

Item ActionItems DescriptionQty Sub SectionSpec Section

0001 06 40 50 Solid Phenolic Resin Panel Fabrication - Product Data

1 06 40 50

0002 06 65 10 Solid Surface Fabrication - Product Data

1 06 65 10

0003 Solid Surfaces Color Samples1

Contact Name Copies NotesCompany NameCc:

229 CONSTRUCTORS Vincent Mowers 1

VA MEDICAL CENTER Steven Garreau 1

VA MEDICAL CENTER Lawrence Casciano 1

VA MEDICAL CENTER Jonathan Aikin 1

Remarks

Dillon Young 6/17/201

Prolog Manager Printed on: 6/17/2010 229 2009 Page 1

DuPont Surfaces

DUPONT TM CORIAN® PERFORMANCE PROPERTIES

TECHNICAL BULLETIN

Property Typical Result Test

Tensile Strength 6,000 psi ASTM D 638 Tensile Modulus 1.5 x 106 psi ASTM D 638 Tensile Elongation 0.4% min. ASTM D 638

Flexural Strength 10,000 psi ASTM D 790 Flexural Modulus 1.2 x 106 psi ASTM D 790

Hardness >85 Rockwell “M” Scale

ASTM D 785

56 Barcol Impressor

ASTM D 2583

Thermal Expansion 3.02 x 10-5 in./in./°C ASTM D 696 (1.80 x 10-5 in./in./°F)

Gloss (60° Gardner) 5–75 (matte—highly polished) ANSI Z124

Light Resistance (Xenon Arc) No effect NEMA LD 3-2000 Method 3.3

Wear and Cleanability Passes ANSI Z124.3 & Z124.6

Stain Resistance: Sheets Passes ANSI Z124.3 & Z124.6

Fungus and Bacteria Resistance Does not support microbial growth ASTM G 21 & G 22

Boiling Water No visible change NEMA LD 3-2000 Resistance Method 3.5

High Temperature No change NEMA LD 3-2000 Resistance Method 3.6

Izod Impact 0.28 ft.-lbs./in. of notch ASTM D 256 (Notched Specimen) (Method A)

Ball Impact No fracture—1⁄2 lb. ball: NEMA LD 3-2000 Resistance: Sheets 1⁄4" slab—36" drop Method 3.8

1⁄2"† slab—144" drop

Weatherability �E*94<5 in 1,000 hrs. ASTM G 155

Specific Gravity† 1.7

Water Absorption Long-term ASTM D 570 0.4% (3⁄4") 0.6% (1⁄2"†) 0.8% (1⁄4")

Toxicity 99 (solid colors) Pittsburgh Protocol 66 (patterned colors) Test (“LC50” Test)

Flammability All colors ASTM E 84, (Class I and Class A) NFPA 255 & UL 723

Flame Spread Index <25

Smoke Developed Index <25

† † (12 mm) 4.4 lbs.

Shapes meet or exceed the ANSI Z124.3 and ANSI Z124.6 standards for plastic sinks and lavatories.

NEMA results based on the NEMA LD 3-2000

DuPont™ Corian® solid surfaces meet the demanding needs of today’s commercial surfacing applications. As a solid, non-porous surface, Corian® can be maintained with minimum care to retain the original appearance. Because it can be repaired, Corian® will still look and perform like a new installation, while other surfacing materials will often need to be replaced. With proper care the Corian® surfaces in your commercial application will stay looking like new.

For more information, call 1-800-4Corian (1-800-430-6072).

There are three types of Corian® Solid Surface finishes: matte/satin, semigloss and high-gloss. Contact your Corian® sales expert if you are unsure of your finish. Most countertops and all sinks and lavatories are finished with a matte/satin finish.

Soapy water, ammonia-based cleaners or commercially available solid surface cleaners will remove most dirt and residue from all types of finishes. Stubborn residue will require a little stronger cleaner. Follow the recommendations below to properly clean your Corian® Solid Surface application.

Washing with soap and water is usually sufficient to remove surface dirt or stains. Be sure to wipe surface completely dry.

Ammonia based liquid cleaner (not window cleaner) may also be used. Always rinse surface thoroughly and wipe dry.

Drying is an important step, preventing a build-up of soap film or cleaning residue, which can create the appearance of light scratches over time. In the event this occurs, apply a mild abrasive cleaner to a damp sponge or white Scotch Brite® pad and rub into the surface in a circular motion. When finished, rinse thoroughly to remove all cleaner, then wipe completely dry.

Stubborn soap film or cleaning residue build-up in Corian® is easily removed with abrasive cleanser and a white Scotch-Brite® pad or a sponge.

For darker colors, a polish may be used to enhance the shine. For areas where there may be food contact, always use a polish formulated for food contact areas, such as Countertop Magic®. Where food contact is not a possibility, a simple furniture polish may be used. Always follow the manufacturer’s instructions for using the polish and for safety concerns.

Corian® is unaffected by common household and commercial cleaners such as Powdered abrasive cleansers (like Comet®) Ammonia Strong detergents Oxalic acid solutions Dilute hydrochloric acid solutions Dilute trisodium phosphate solutions

Acid drain cleaners may cause surface damage and should not be used on Corian® solid surfaces.

Unlike other surface materials stains or marks caused by cigarettes, alcohol, food, lipstick, hair dye, shoe polish, iodine, marking pens, etc. can be removed by using an abrasive cleanser and a Scotch-Brite® pad.

If the surface has a matte finish, use a green Scotch-Brite® pad If the surface has a gloss finish, use a white Scotch-Brite® pad

This type of maintenance will not harm the Corian® surface, and will restore it to “like new” condition.

Surfaces of Corian® can be repaired with no permanent damage. Tough to remove stains, fine scratches, and small cuts can be removed using standard repair techniques.

Contact DuPont (800.426.7426), or your supplier, for information on how to have your Corian® surfaces professionally restored to their original finish

To restore a matte finish - use 220 grit sandpaper followed by hard buffing with a green Scotch-Brite® pad in a circular motion.

To restore a semi-gloss - use the 220 grit sandpaper, followed by 320 grit, followed by 400 grit. Then blend the finish in by using abrasive cleanser and a sponge or rag.

A high gloss finish is best restored by a professional. Contact your supplier or DuPont.

If the damage is particularly deep, use a random orbital sander equipped with vacuum dust collection. Start with 120 grit sandpaper first, followed by 180-220 grit. After sanding, a uniform matte finish can be obtained by buffing with a green Scotch-Brite® buffing pad. For a semi-gloss, continue sanding with 320 followed by 400 grit. Then buff with a gray Scotch-Brite® pad.

The impact resistance of Corian® allows it to withstand harsh use without chipping, breaking, or cracking. However, if damaged due to extreme abuse, satisfactory repairs can often be made. Contact DuPont for guidance.

Some chemicals are not compatible with Corian®. Avoid surface contact with:

Strong chlorinated solvents Chloroform Ketones Methylene chloride (paint removers) Very strong acids such as concentrated sulfuric and hydrochloric acids Acid drain cleaners should not be used.

Surfaces exposed to these agents should be promptly flushed with water. Contact for even a short period of time can cause surface damage, spots, or staining. Follow the recommended repair procedures described above as needed to repair and/or restore the surface to its original condition. Severe damage caused by incompatible chemical contact will require professional repair. Again, contact DuPont, or your supplier for assistance.

While Corian® withstands heat better than most surface materials, do not place hot cookware directly on a Corian® surface.

To avoid damage caused by excessive heat:

Always use a trivet or hot pad under hot cookware Always use a trivet with minimum ¼” legs under small electrical appliances such as fryers and cookers

A Corian® surface can be scratched or gouged if used as a cutting or chopping surface for food preparation. Scratches can be repaired, but to avoid the problem, use of a cutting board is highly recommended.

Scotch-Brite® is a registered trademark of the 3M Company. Countertop Magic® is a registered trademark of Magic America Corp. Comet® is a registered trademark of Proctor & Gamble.

Copyright © 2006 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, The miracles of science™ and Corian® are registered trademarks or trademarks of E. I. du Pont de Nemours and Company or its affiliates.

The information contained in this Technical Bulletin is given by E. I. du Pont de Nemours and Company free of charge. It is based upon technical data which DuPont believes to be reliable and is intended for use by persons having knowledge of this technical area at their own discretion and risk. Seller assumes no responsibility for results obtained or damage incurred from the use of this Technical Bulletin either in whole or in part by a buyer of Corian®.

DUPONT™ CORIAN® COMMERCIAL (PRODUCT ONLY)

10 YEAR LIMITED WARRANTY FOR NORTH AMERICA

This warranty applies to all Corian® product used in commercial projects or commercial applications on or after September 8, 2004.

DuPont warrants to the owner of the original installation of Corian® solid surface that Corian® products shall be free from materials defects arising from the manufacture of Corian® sheet or shape products for a period of ten (10) years from the date of purchase of your Corian® solid surface. This is a product only warranty, not a fabrication and/or installation warranty.

DuPont makes no express or implied warranty, including, without limitation, the warranties of merchantability, fitness for a particular purpose (even if that purpose is know to DuPont), or from any course of dealing or trade usage regarding Corian® products. DuPont shall assume no risk or liability for results obtained by the use of products covered by this warranty, whether used singly or in combination with other materials. The warranty does not cover products made by other suppliers or manufacturers, and nor does it cover color, should you decide, during or after installation, that you do not like the color you or your designee selected. Furthermore, this warranty does not cover any damage to Corian® caused by improperly installed, used or maintained appliances which are either built into Corian® or placed or stored on Corian®.

The sole obligation and liability of DuPont under this warranty shall be to provide replacement product during the warranty period where DuPont or its service agent, determines that products contain materials defects arising from the manufacture of Corian® sheet or shape products. It may be determined, solely at the discretion of DuPont or its service agent, that a repair will be performed instead of replacement product. It is understood that DuPont has no obligation whatsoever to perform such repair, but may, at its option, elect to do so. In such event DuPont or its service agent will perform the necessary repair, including cost of labor in the actual performance of the repair of product. Any other costs associated with or arising out of the repair will be the responsibility of the owner. Except for the foregoing replacement or repair obligations, DuPont shall have no liability for any other loss, damage or expense, arising out of or in connection with Corian® or its installation. In no event shall DuPont be liable for special, indirect, incidental, punitive, consequential or any similar or other damages (including without limitation, damages for loss of business profits, business interruption or any other loss), whether or not caused by or resulting from the negligence of DuPont even if DuPont has been advised of the possibility of such damages.

In order for DuPont to respond under this warranty, the owner must give DuPont prompt notice of any alleged defects that appear or should have been discovered after the exercise of reasonable diligence. To qualify for repair or replacement, the owner must provide the original sales receipt or other documentation acceptable to DuPont to demonstrate proof of purchase within the warranty period. The owner must reasonably cooperate with DuPont or its service agents in their efforts to perform their obligations under this warranty.

All decisions regarding the existence of manufacturing defects or decisions affecting this warranty shall be made by DuPont and shall be final and binding upon the parties.

This warranty does not cover damage caused by mishandling, misuse, damage from excessive heat or exposure to weather conditions, physical or chemical abuse, acts of nature, or as further set out below.

“Physical, chemical or other abuse” includes any use of the product that is unreasonable considering the normal and expected uses of such products, and includes, but is not limited to, damage from use of improper cleaning solutions, leaving substances, such as bleach or drain cleaner on the product without prompt cleaning, the dropping of heavy objects on surfaces or in sinks, excessive weight on the surface, or product which has not been maintained in accordance with the DuPont Care and Use Guide, which is available on www.Corian.com.

“Excessive heat” means exposure to heat of such a degree that white marks, white rings or cracks appear on the product. Cracking around a cooktop, hot tray, heat lamp or buffet top may appear by permitting cookware that is on or partially on heating elements to overhang the countertop or other heat source to cause excessive heat on the countertop or from using high temperatures for excessively lengthy periods of time. Common sense should be exercised by using trivets when putting hot objects directly from a heat source onto the product or when exposing the product to heat.

“Acts of nature” include, but are not limited to, exposure to the outdoors, weather effects and fire.

In addition, DuPont shall not be responsible for any damage or injury caused in whole or in part by climate, job site condition, architectural and engineering design, structural movement, acts of vandalism, accident, war, or defective or improper workmanship by the fabricator or installer or any laborer, or any other damage or injury not solely and directly caused by defects in products covered by the warranty.

Furthermore, laws and building and safety codes governing the design, engineering and construction of installations vary widely. DuPont clearly sets out and identifies the performance parameters of Corian® in its literature and Technical Bulletins which are available on the website. Accordingly, DuPont assumes no responsibility or obligation with respect to the selection of product for the installation or the design, engineering and construction of the installation.

This warranty is issued to the original owner of the structure into which product was installed and expires upon transfer of ownership of the structure to a third party or removal of the Corian® installation to another location.

This is the only commercial product warranty made by DuPont for Corian® solid surface. No representative, dealer or any other person is authorized to make or makes any warranty, representation or promise on behalf of DuPont with respect to such products. No terms or conditions other than those stated herein, and no agreement or understanding, oral or written, in any way purporting to modify this warranty shall be binding upon DuPont unless made in writing and signed by and authorized employee of DuPont.

This warranty shall be interpreted exclusively under the laws of the State of Delaware.

For more information about this warranty, please contact DuPont Corian® directly by calling 1-800-426-7426.

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

DuPont Page 1 Material Safety Data Sheet

"CORIAN" SOLID SURFACE MATERIAL

COR001 Revised 2-JUL-2004

CHEMICAL PRODUCT/COMPANY IDENTIFICATION

Material Identification

Corian is a registered trademark of DuPont.

Company Identification

MANUFACTURER/DISTRIBUTOR

DuPont 1007 Market Street Wilmington, DE 19898

PHONE NUMBERS

Product Information : 1-(800)441-7515 Transport Emergency : 1-(800)424-9300 (CHEMTREC) Medical Emergency : 1-(800)441-3637

COMPOSITION/INFORMATION ON INGREDIENTS

Components

Material CAS Number % "Corian" Solid Surface Material 100

Exposure limits may be applicable for the following:

Methyl Methacrylate <1 Butyl Acrylate <1

Components (Remarks)

Material is not known to contain Toxic Chemicals under Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372.

HAZARDS IDENTIFICATION

Potential Health Effects

"Corian" Solid Surface Material is not hazardous as shipped.

However, operations such as sawing, routing, drilling and sanding can generate dust. High concentrations of dust can irritate eyes, nose and respiratory passages and cause coughing and sneezing. Since there are no exposure limits established for dust from "Corian" Solid Surface Material, DuPont recommends using the exposure limits for polymethyl methacrylate. (See details in the Exposure Controls/ Personal Protection Section of this MSDS.)

COR001 DuPont Page 2 Material Safety Data Sheet

(HAZARDS IDENTIFICATION - Continued)

"Corian" Solid Surface Material does not offgas at room temperature. At higher temperatures, small amounts of methyl methacrylate and butyl acrylate can be released, the amounts of which are dependent upon temperature, time and other variables.

Methyl methacrylate and butyl acrylate vapors can irritate eyes, skin, nose and throat and can cause allergic skin rashes. Overexposure to vapors of methyl methacrylate can cause headache, nausea, weakness and lung irritation with cough, discomfort and shortness of breath.

Individuals with preexisting diseases of the lungs or skin may have increased susceptibility to the effects of overexposure to methyl methacrylate or butyl acrylate.

Carcinogenicity Information

None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, OSHA or ACGIH as a carcinogen.

FIRST AID MEASURES

First Aid

INHALATION

No specific intervention is indicated as the compound is not likely to be hazardous by inhalation.

However, if large amounts of dust are inhaled, or if exposed to fumes from overheating or combustion, remove to fresh air.

Consult a physician if breathing is difficult or if symptoms persist.

SKIN CONTACT

The compound is not likely to be hazardous by skin contact but cleansing the skin after use is advisable.

EYE CONTACT

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a physician.

INGESTION

No specific intervention is indicated as compound is not likely to be hazardous by ingestion. Consult a physician if necessary.

COR001 DuPont Page 3

FIRE FIGHTING MEASURES

Flammable Properties

"Corian" Solid Surface Material can be combusted only with difficulty.

Hazardous gases/vapors produced in a fire are carbon monoxide, methyl methacrylate, butyl acrylate and aldehydes.

Extinguishing Media

Water, Dry Chemical, CO2, Foam.

Fire Fighting Instructions

Keep personnel removed and upwind of fire. Wear self-contained breathing apparatus.

ACCIDENTAL RELEASE MEASURES

Safeguards (Personnel)

NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up.

Spill Clean Up

Recover undamaged and minimally contaminated material for reuse and reclamation.

HANDLING AND STORAGE

Handling (Personnel)

Avoid breathing dust.

Avoid breathing fumes generated during heating.

Temperatures reached while thermoforming "Corian" Solid Surface Material are high enough to release some methyl methacrylate or butyl acrylate. Machining operations during fabrication, such as sawing, sanding or routing, create friction and may result in temperatures high enough to release small amounts of methyl methacrylate or butyl acrylate at the cutting tool surface.

COR001 DuPont Page 4

EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Controls

Use ventilation that is adequate to keep employee exposure to airborne concentrations below recommended limits.

Provide for appropriate exhaust ventilation and dust collection at machinery.

Personal Protective Equipment

EYE/FACE PROTECTION

Wear safety glasses during operations such as sawing, sanding, drilling or routing.

RESPIRATORS

During grinding, sanding, or sawing operations, if airborne particulate concentrations are expected to exceed permissible exposure limits, use a half face NIOSH approved air purifying respirator with type N100 filter. Respirators should be selected based on the form and concentration of the contaminant in air and in accordance with OSHA Respiratory Protection Standard CFR 1910.134.

PROTECTIVE CLOTHING

Wear leather or cotton gloves when handling large pieces and during operations such as sawing, routing or drilling.

Exposure Guidelines

Exposure Limits

"CORIAN" SOLID SURFACE MATERIAL

AEL * (DuPont) : Polymethyl Methacrylate 10 mg/m3, 8 Hr. TWA, total dust 5 mg/m3, 8 Hr. TWA, respirable dust

PEL (OSHA):

Particulates (Not Otherwise Regulated) 15 mg/m3, 8 Hr. TWA, total dust 5 mg/m3, 8 Hr. TWA, respirable dust

TLV (ACGIH):

Particulates (Insoluble) Not Otherwise Classified 10 mg/m3, Inhalable particulate 8 Hr. TWA;

3 mg/m3, Respirable particulate 8 Hr. TWA

COR001 DuPont Page 5

Other Applicable Exposure Limits Methyl Methacrylate PEL (OSHA) : 100 ppm, 410 mg/m3, 8 Hr. TWA TLV (ACGIH) : 50 ppm, 8 Hr. TWA, STEL 100 ppm, A4 Sensitizer AEL * (DuPont) : None Established

Butyl Acrylate PEL (OSHA) : None Established TLV (ACGIH) : 2 ppm, 8 Hr. TWA, A4 Sensitizer AEL * (DuPont) : 2 ppm, 8 & 12 Hr. TWA, Skin

* AEL is DuPont’s Acceptable Exposure Limit. Where governmentally imposed occupational exposure limits which are lower than the AEL are in effect, such limits shall take precedence.

PHYSICAL AND CHEMICAL PROPERTIES

Physical Data

% Volatiles : 0 % at room temperature Solubility in Water : Insoluble Form : Sheets and shaped articles Specific Gravity : 1.74-1.78

STABILITY AND REACTIVITY

Chemical Stability

Stable at normal temperatures and storage conditions.

Incompatibility with Other Materials

None reasonably foreseeable.

Decomposition

Thermal decomposition can release methyl methacrylate and butyl acrylate.

Polymerization

Polymerization will not occur.

COR001 DuPont Page 6

ECOLOGICAL INFORMATION

Ecotoxicological Information

Aquatic Toxicity

No information available.

Toxicity is expected to be low based on insolubility in water.

DISPOSAL CONSIDERATIONS

Waste Disposal

Preferred options for disposal are (1) recycling,

(2) incineration with energy recovery, and (3) landfill.

Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations.

TRANSPORTATION INFORMATION

Shipping Information

DOT

Not Regulated.

Shipping Information -- Canada

This material is Not Regulated.

REGULATORY INFORMATION

U.S. Federal Regulations

TSCA Inventory Status : In compliance with TSCA Inventory requirements for commercial purposes.

State Regulations (U.S.)

SUBSTANCES ON THE PENNSYLVANIA HAZARDOUS SUBSTANCES LIST PRESENT

AT A CONCENTRATION OF 1 % OR MORE (0.01% FOR SPECIAL HAZARDOUS

SUBSTANCES)- None known.

WARNING - SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE

CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM- None known.

SUBSTANCES ON THE NEW JERSEY WORKPLACE HAZARDOUS SUBSTANCE LIST

PRESENT AT A CONCENTRATION OF 1% OR MORE (O.1% FOR SUBSTANCES

IDENTIFIED AS CARCINOGENS, MUTAGENS OR TERATOGENS)- None known.

COR001 DuPont Page 7

(REGULATORY INFORMATION - Continued)

Canadian Regulations

WHMIS Classification:

WHMIS- Exempt/Manufactured article.

DSL- Exempt/ Article.

OTHER INFORMATION

Additional Information

MEDICAL USE: CAUTION: Do not use in medical applications involving permanent implantation in the human body. For other medical applications see DuPont CAUTION Bulletin No. H-50102.

The data in this Material Safety Data Sheet relates only to the specific material designated herein and does not relate to use in combination with any other material or in any process.

Responsibility for MSDS : DuPont Surfaces Products Address : Chestnut Run Plaza Wilmington, DE Telephone : 302-999-4594

This information is based upon technical information believed to be reliable. It is subject to revision as additional knowledge and experience is gained.

End of MSDS

D e c o r a t i v e s u r f a c e s f o r c o u n t e r t o p s a n d o t h e r s u r f a c i n g a p p l i c a t i o n s Great Colors, Great Performance Characteristics and Great Savings Compared to Corian®

Home

Company/Product Info

Request Information

Colors & Patterns

Sinks & Bowls

Technical Data

Care & Maintenance

Additional Resources

Warranty Information

Retail Dealer Locator

Distributor Locator

Other Links

Solid surface products for your surfacing applications.

Solid surface designs that represent the industry's most sophisticated and popular colors.

Solid surface sinks that are available in a variety of designs and colors.

Products that can be used in the following Residential and Commercial applications:

Kitchen countertops Vanity tops Tabletops and furniture Shower surrounds and wet-wall applications Window sills Reception desks Conference tables

Food serving areas Restaurant interiors Retail interiors and POP displays Healthcare (hospitals, clinics and nursing homes) Schools Offices Banks Signs, displays and

Other Links:

MEGANITE.com AetnaPlywood.com

Visit these sites:

PickPro.com programming/web design wmsPro.com warehouse management

Toll Free Number: 866.MEGANITE [866.634.2648]

MEGANITE™ is an acrylic solid surface material that is used for countertops and other surfacing applications. Aetna Plywood, the leading distributor of wood and laminate products in the Midwest, has added a new solid surface product to its line-up, called MEGANITE™. Aetna Plywood is the exclusive provider of MEGANITE™ Solid Surface in Illinois, Wisconsin, Indiana, Ohio, West Virginia, Michigan, Minnesota, North Dakota, South Dakota and Iowa.

Page 1 of 2MEGANITE™ is an acrylic solid surface material that is used for countertops and other s...

6/14/2010http://www.meganite.info/meganite_solid_surface/companyinfo.asp

D e c o r a t i v e s u r f a c e s f o r c o u n t e r t o p s a n d o t h e r s u r f a c i n g a p p l i c a t i o n s Great Colors, Great Performance Characteristics and Great Savings Compared to Corian®

Home

Company/Product Info

Request Information

Colors & Patterns

Sinks & Bowls

Technical Data

Care & Maintenance

Additional Resources

Warranty Information

Retail Dealer Locator

Distributor Locator

Other Links

Solid Surface Sheet Sizes (Standard)

THICKNESS WIDTH LENGTH WEIGHT

1/2inch(12.3mm) 30inches(760mm) 144inches(3660mm) 132lbs/sheet

TESTS TYPICAL RESULTS

Water absorption ASTM D-570(12.3mm) 0.04% Tensile Strength ASTM D-638 6000psi Flexural Strength ASTM D-790 9000psi

Thermal Expansion ASTM D-696 1.3" 10-6in/in/° F Barcol Hardness JIS-F-6911 60 Specific Gravity 1.7

Flammability UBC8-1(NFPA No.255) Class 1(Class A) Flame Spread ASTME 84 10

Smoke Density ASTME 84 5 Impact Resistance MEMA LD3-3-3(1/2lb ball) >125"

Color Stability NEMA LD3-3-10 No Change High Temperature Resistance NEMA LD3-3-6 No Change

Boiling Water Surface Resistance NEMA LD3-3-5 No Change Stain Resistance ANSI Z124.3 & Z124.6 Pass

Bacteria & Germ Resistance ASTM G-22 No Change Fungus & Mold Resistance ASTM G-21 No Change

Splash Zone NSF-51

NSF Approved

Other Links:

MEGANITE.com AetnaPlywood.com

Visit these sites:

PickPro.com programming/web design wmsPro.com warehouse management

Toll Free Number: 866.MEGANITE [866.634.2648]

MEGANITE™ is an acrylic solid surface material that is used for countertops and other surfacing applications. Aetna Plywood, the leading distributor of wood and laminate products in the Midwest, has added a new solid surface product to its line-up, called MEGANITE™. Aetna Plywood is the exclusive provider of MEGANITE™ Solid Surface in Illinois, Wisconsin, Indiana, Ohio, West Virginia, Michigan, Minnesota, North Dakota, South Dakota and Iowa.

Page 1 of 2MEGANITE™ is an acrylic solid surface material that is used for countertops and other s...

6/14/2010http://www.meganite.info/meganite_solid_surface/technicaldata.asp dyoung Text Box SS1 Corian - Fawn

- Countertops

- Shower Thresholds dyoung Text Box SS3 Meganite - Canela Stone 504

- Window Sills

- Banquette Bench dyoung Text Box SS4 Meganite - Bone 003

- Sinks dyoung Text Box SS2 Meganite - Rushmore Granite 683

- Shower Rm & Toilet Rm Wainscot