20R1652 Questions.Answers.pdf

# Industry Question Gov't Response Attachment #

1 Is there a specific NSN for the pouch? I’d like to see a sample. There has not been an NSN assigned to the pouch, because none has been develop at this time. N/A

2 Please provide instructions as to how I'm supposed to fill out the necessary forms.

52.212-1 Instructions to offerors can be found on page 2 of Attachment 2 of the Combined Synopsis/Solicitation.

Attachment 2 of the Combined

Synopsis/Solicitation

3 What is the contract number and contract type?

The Combined Synopsis/Solicitation number is M67854-20-R-1652 and the contract type is a 3 year, firm-fixed-price (FFP), Indefinite Delivery/ Indefinite Quantity .

N/A

There are multiple callouts for specific materials to use “Tan” in color (please see 2.8 and 2.10). Can you confirm that some hardware is to be Tan in color and not Coyote 498?

The pouch shall be comprised of materials that meet current Near Infrared requirements for Coyote 498 in MIL-DTL-32439A. Coyote 498 will be use throughout to include hardware accessories.

N/A

Can the Government provide additional details or descriptions of the Velcro Stop Roll Straps?

The Velcro Stop Roll Straps are often found on loadbearing gear at the end of straps and sometimes referred to as the "excess webbing keeper". It’s so the Marine can roll up the extra webbing that is there, for adjustment purposes, and not dangling around to get caught on obstacles. In some cases, when this piece isn't there, Marines will just tape up the extra webbing.

N/A

84mm Ammunition Pouch M67854-20-R-1652 Questions & Answers

The SOW states Qty 3 Pre-Production Samples 30 days after award, but when I read the proposal submission criteria it states 3 source selections samples are to be provided with submission. If you could clarify that would be great.

Three source selection samples are to be provided with the proposal as stated in 52.212-1 Instructions to Offerors in Attachment 2 of the Combined Synopsis/Solicitation. Once an Offeror is awarded, it will need to produce three Pre-Production Samples, before mass production can be authorized.

Attachment 2 of the Combined

Synopsis/Solicitation

On the Statement of Work, Attachment 01, section 2.3.2 Commercial Item Description, item no. 2 reads “The pouch shall accommodate rounds that are no less than 18 inches in length, but also have ability to extend and securely fit rounds up to 30 inches in length (T).”

On the Commercial Item Description, Attachment 02, section 1 General Function, subsection 1.2 Length reads “the pouch shall be able to adjust to the appropriate length for any MAAWS round no less than 18 inches and no more than 32 inches in length…”

• Can you advise which measurement for maximum length is correct? Or are these describing different measurements?

Please see Admendment 01 to the Statement of Work for updated measurements.

Amendment01.

Attachment01.SOW.MAA WS 84mm AmmoPouch