Attachment 04. CID. MAAWS 84mm Ammo Pouch CID 20R1652.pdf

M67854-20-R-1652

Attachment 04

Multi-Role Anti-Armor Anti-Personnel Weapon System 84mm Ammunition Pouch

COMMERCIAL ITEM DESCRIPTION

REQUIREMENTS

The Contractor shall furnish the services, personnel, facilities, equipment and materials required to produce and deliver the Multi-Role Anti-Armor Anti-Personnel Weapon System (MAAWS)

84mm Ammunition Pouch and any additional requirements outlined set forth in this solicitation.

Commercial Item Description. The following Physical, Fit, and Function Attributes shall be required:

1. General Function.

1.1. Size. The pouch shall be able to carry/fit any (one) of the 84 mm rounds without excessive force listed in Attachment 1 (T).

1.2. Length. The pouch shall be able to adjust to the appropriate length for any MAAWS round no less than 18 inches and no more than 32 inches in length, to allow for a fit that is snug and secure preventing the round from excessive movement inside the pouch (T). The MAAWS rounds are shown in Attachment 1 (T).

1.3. Protection. The entire round shall be protected by the pouch with no parts of the round protruding from the pouch (T).

1.4. Load Time. The pouch shall be able to access and remove the round from the pouch in under 30 seconds (T)/15 seconds (O).

1.5. Round Fit. The pouch shall retain and keep the round secure during normal training and combat operations (T).

1.6. Weight. The pouch shall weigh less than 1.00 pounds (T)/0.75lbs (O). The pouch with sling shall weigh less than 1.75 lbs. (T).

1.7. Berry Amendment. The pouch shall be compliant with Berry Amendment (T).

2. Build and Material.

2.1. Fabric Layers. The MAAWS pouch shall have an outer and inner layer of fabric with a foam padding in-between (T).

2.2. Fabric Material. The MAAWS outside material layer shall use no less than a 500

Denier Nylon fabric, with a DWR Finish that is compliant with MIL-DTL-32439A

(T).

2.3. Color. The pouch shall be comprised of materials that meet current Near Infrared requirements for Coyote 498 in MIL-DTL-32439A (T).

2.4. Padding. The pouch shall protect the round from drop by being fully padded on all surfaces except for seems and zippers, between an Outer and Inner fabric with a closed-cell, irradiation cross-linked foam no less than 1/4” thick (T).

2.5. Labels/Markings. The pouch shall have a permanent label that says “TOP” applied near the Pouch Top, and a permanent label that says “BOTTOM” applied near the

Pouch Bottom (T).

2.6. Seams. The pouch seaming shall be consistent and exhibit a uniform appearance (T).

2.7. Quality. The pouch shall be free of all loose thread, lint, foreign matter, irregularities, or defects that could adversely affect performance or durability and uniform in quality

(T).

2.8. Opening. The pouch shall have a zippered opening at both ends which provide the ability to insert or remove the MAAWS 84mm round (T). The zipper shall be a tan, #5 Continuous Coil Zipper to close both ends (T). Each Zipper end will be equipped with 2 non locking zipper pulls with tab (T).

2.9. Zipper Placement. The Zipper shall be located no closer than 1 inches from the end of the pouch (T).

2.10. Side Release Buckle. Both ends of the pouch shall have a tan, 1 inch Side Release

Buckle that serves as a secondary closure method for both end openings (T). The

Female side of the side release buckle shall be on the lid end of the openings and the

Male side of the buckle shall be mounted to the pouch side (T).

2.11. Stitching. Stitching shall be of high quality in accordance with ASTM-D-6193 and the ends of all stitching on the pouch shall be backstitched or overstitched (T).

3. Integration.

3.1. Mounting. The pouch shall provide the ability to mount the pouch horizontally and vertically to current load bearing equipment (T).

3.2. PALS. The pouch shall be compatible with the current Pouch Attachment Ladder

System (PALS) for attachment to existing Marine Corps Load Carriage Systems. (T).

3.3. Primer Protector. The pouch bottom shall have a ridge material extending from the bottom zipper to no less than 9 inches up the pouch on all sides to protect the rounds primer from being struck, inadvertently by an object (T).

3.4. Roll Straps. Velcro stop roll straps shall be included for all PALS straps (T).

3.5. Sling. The pouch shall have an adjustable and detachable Sling/Shoulder Strap to allow for shoulder carriage of the pouch loaded with a MAAWS 84mm round (T).

3.6. Sling Attachment Point. The pouch shall have a 1 inch Side Release Buckle, female side, attached on each end of the pouch for sling attachment (T).

3.7. Sling Connector. The sling will be provided with a 1 inch Side Release Buckle, male side, on each end of the sling for attaching to the pouch (T).

3.8. Sling Length. The sling shall be adjustable to any length ranging from 35 inches to 59 inches (T). The sling, while attached to a fully loaded MAAWS Ammo Pouch, shall not change in length without deliberate user action (T).

3.9. Tube Straps. Two straps, which are not connected to the pouch, shall be provided which can cinch around a 120mm diameter tube and connect to the provided sling (T).

The purpose of these straps are to allow the sling to be used for over the shoulder carry of a MAAWS Ammunition two pack hard case (T). See Attachment 1 for picture of hard carrying case.

4. Environmental.

4.1. Water Resistance. The pouch shall be water resistant (T), water proof (O).

4.2. Drainage. The pouch shall allow for water to drain (T).

4.3. Noise Signature. The pouch shall not provide significant noise signature (T).

4.4. Visible Signature. The pouch shall not have any light reflective surfaces (T).

4.5. Sand and Dust. The pouch shall be constructed to limit the intrusion of sand, dust and debris from entering the pouch when sealed at any length settings (T).

4.6. Temperature. The pouch shall not be damaged when functioning in temperatures ranging from 125F to -20F (T).

Attachment 1: Ammo Types

MAAWS Hard Carrying Case for 84MM Round

SUPPORT

HEDP

ASM

MTM

HE

441D

SMOKE

469C

ILLUM

545C

HEAT

ANTI-

ARMOR

ANTI-

SOFT