Attachment_4_-_MultiCal_SOW.pdf

MULTI-CALIBER MATCH AMMUNITION STATEMENT OF WORK

Attachment 4

1. Background: The USMC Weapons Training Battalion Competition-In-Arms Program

(CIAP) has a requirement for commercial precision match-grade ammunition in order to train and compete in state, regional, Inter-service and National competitions.

2. Scope: The contractor shall provide and deliver the following match-grade ammunition in the quantities specified in each individual delivery order issued under this contract:

9mm 115 grain Full Metal Jacket (FMJ)

9mm 147 grain Jacketed Hollow Point (JHP)

12 gauge 7/8 oz. Lead Slug

.45 Automatic Colt Pistol (ACP) 185 grain Jacketed Hollow Point (JHP)

.223 80 grain

3. Technical Requirements: Ammunition provided under this contract shall conform to the requirements described in Attachment 5, Technical Requirements.

4. Lot Acceptance Test (LAT): The contractor shall perform LAT to demonstrate conformance of ammunition with contractual requirements. The contractor shall prepare LAT procedures and updates. LAT procedures and updates are subject to USG review and approval. LAT shall be conducted on a number of samples taken at random from each production lot. The results of the test shall demonstrate the system meets all contractual requirements.

CDRL A001: DI-NDTI-80603A, Test Procedure (LAT)

CDRL A002: DI-NDTI-80809B, Test/Inspection Report (LAT)

4.1 Nonconformance of Lot Acceptance: In the event the LAT fails to meet requirements as described in Technical Requirements, the contractor shall submit plans for the corrective action or disposition to the USG for approval. Minor failures may be corrected during the testing, with

USG approval. Production shall not be initiated without USG approval. Failure analysis and corrective action procedures and reporting shall be done per paragraph 4.1.1.

4.1.1 Failure Reporting, Analysis, and Corrective Action System: The contractor shall use a closed loop failure reporting system, procedures for analysis of failures to determine the root cause, and documentation for recording corrective actions taken. The Failure Reporting, Analysis, and Corrective Action System (FRACAS) shall include uniform failure reporting, failure analysis reports and corrective actions. The contractor shall notify the USG of any failure impacting cost, schedule, and performance. All failures shall be reported as required to the USG for review. All failures shall be categorized as in-field or in-factory failures. Each FRACAS report shall, at a minimum, identify the root cause, and detail the remedial action taken. The

USG reserves the right to conduct a Failure Review Board (FRB) throughout the contracted period of performance. Nothing in this paragraph shall be construed as relieving the contractor of the contractual obligation to provide and deliver cartridges conforming to the performance specification or other contractual requirements.

CDRL A003: DI-SESS-81315B, Failure Analysis and Corrective Action Report

5. Packaging: The cartridges shall be assembled in identifiable lots. Ammunition will be packaged per standard commercial practices for each type ammunition. Each case, and individual box in that case, shall be labeled with the lot number, caliber, projectile weight and projectile type.

Preservation, packaging, packing and marking of the items supplied and delivered under this contract shall be in accordance with current industry standards in order to prevent any deterioration and/or damage during shipping, handling, and storage, and to insure acceptance by common carrier and safe arrival at destinations.