ATC_SLEP_SL-3-11262A_-_13_JULY_2017.pdf

JULY 2017 SL-3-11262A

PCN 123 112620 00

TAMCN B00387B

MARINE CORPS STOCKLIST

COMPONENTS LIST

FOR

ALL TERRAIN CRANE

MAC 50

3810-01-538-4030

SUPERSEDURE NOTICE: THIS PUBLICATION SUPERSEDES SL-3-11262A DATED 31 MAY 2017.

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES

AND THEIR CONTRACTORS. THIS PUBLICATION IS REQUIRED FOR ADMINISTRATION AND

OPERATIONAL PURPOSES, AS DETERMINED 31 JULY 2017. OTHER REQUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO: MARINE CORPS SYSTEMS COMMAND, PM ENGINEER

SYSTEMS, 2200 LESTER STREET, QUANTICO, VA 22134-6050.

DESTRUCTION NOTICE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

FOR OFFICIAL USE ONLY

ii

UNITED STATES MARINE CORPS

MARINE CORPS SYSTEMS COMMAND

2200 LESTER STREET

QUANTICO, VIRGINIA 22134-6050

31 July 2017

1. Marine Corps Components Stocklist, SL-3-11262A, TAMCN B00387B, is effective upon receipt.

2. This publication supersedes SL-3-11262A dated 31 May 2017.

3. Safety issues related to the information contained in this manual should be reported to the

Marine Corps Systems Command Safety Office at mcsc_safety@usmc.mil. All significant safety hazards that have the potential to affect other commands and require widespread dissemination shall be reported via a Hazard Report per MCO P5102.1B.

OFFICIAL

DEBORAH OLSON

Program Manager, Engineer Systems

DISTRIBUTION: EDO

mailto:mcsc_safety@usmc.mil

SL-3-11262A Marine Corps Stocklist SL-3-11262A iii

PREFACE

SCOPE

1. This publication lists all components and accessories for collection-type supply items, such as major combinations, systems, groups, outfits, kits, sets or assortments. The components to be issued with the end item are identified under the heading of “SUPPLY SYSTEM RESPONSIBILITY” and when required, under the heading “COLLATERAL MATERIEL”. End items requiring collateral materiel are governed by whether the end item is an initial or replacement issue. Those items listed under the “USING UNIT

RESPONSIBILITY” heading, are to be requisitioned separately through the supply system, when applicable.

Using Units are also responsible for requisitioning the required publications to support the end item identified by the ID number shown on the cover of the SL-3. The end item will be complete when the total quantity of items shown in the SL-3 are on hand.

LIST OF COMPONENTS

2. This listing comprises the major portion of this publication. The data, arranged in columnar form, present the information needed to identify the item and determine its type of issue.

3. Item Number (Column 1). This column specifies a number assigned to each item as it appears in the list.

Numbers are assigned in sequence and are for reference purposes only.

4. National Stock Number (Column 2). This column furnishes the National Stock Number (NSN) assigned to the item.

5. Item Identification (Column 3). This column provides the official catalogued item name and description listed under the heading of either “SUPPLY SYSTEM RESPONSIBILITY ITEMS”, “COLLATERAL

MATERIEL”, or “USING UNIT RESPONSIBILITY ITEMS”. The common name can be listed in parentheses following the official catalogued item name before the colon. If required, sub-headers can be inserted under the above listed headers for arrangement of components to allow for better inventory. See paragraphs 11, 12, and 13.

6. Unit of Measure (Column 4). This column gives the measurement standard of each item. It may or may not be the same as the unit of issue. For example, the unit of issue of a certain wire is coil but only 4 feet are required for the end item. Therefore, the unit of measure shown will not be used for requisitioning purposes. For the proper unit of issue and other required management data, refer to the applicable Management Data List (MDL) when requisitioning.

7. Quantity Used in Unit (Column 5). This column lists the total quantity of an item, according to the unit of measure, required for full functional operation of the end item.

8. Periodic Inventory (Column 6). This column provides space for recording inventory results in accordance with

MCO 4790.2_, TM 4700-15/1_, and MCO 4400.150_, or as directed by the Unit Commander.

9. Using Unit Remarks (Column 7). This column provides space for remarks pertaining to the data recorded in the Inventory column (Column 6) when an inventory is conducted.

NOTE

(*) If required, add an asterisk with Serial No. to the Using Unit Remarks column to indicate serialized items.

10. Optional Columns (Columns 8 and 9). The Fig Key/Ref Des and Model Number columns are now optional, and shall only be used to specify information as recorded in the LCSP. If a column is needed, it will be added and a special note added stating that the columns are renumbered to allow for the extra column. If the two optional columns are not sufficient, a table can be added before the Technical Data and annotated in Special Notes.

iv

SUPPLY SUPPORT CATEGORIES

NOTE

If items cannot be listed in alphabetical order, add a note under Special Notes stating reason for change.

11. Supply System Responsibility Items (SSRI). An alphabetical list of items that are furnished with and must be turned in with the end item. Any item requiring replacement is the responsibility of the holding organization or using unit in accordance with MCO 4400.150_.

12. Collateral Materiel. An alphabetical list of items that are supplied with the initial issue of the end item and are retained by the unit. Not all collateral materiel is cataloged for NSN assignment. The “9999-xx-xxx-xxxx” NSN shown under the heading of “COLLATERAL MATERIEL” (if applicable) is for control within the distribution system only, and is not authorized for requisitioning purposes in accordance with MCO 4400.150_.

NOTE

Refer to the SL-1-2 and requisition the required publications to support the item identified by the ID number shown on the cover of this SL-3.

13. Using Unit Responsibility Items (UURI). An alphabetical list of items that will not be issued with the end item and must be requisitioned, as required, through the supply system by the using unit or holding organization in accordance with MCO 4400.150_.

SUSTAINMENT (DEPOT) LEVEL OF MAINTENANCE REHABILITATION PROGRAM

14. Major items returned under this program will be evacuated under the provision(s) of the applicable Marine

Corps Order(s) with the items listed under SUPPLY SYSTEM RESPONSIBILITY ITEMS. Rebuild and replacement under the sustainment (depot) level of maintenance rehabilitation program will be limited to these items only. Those items under the heading “COLLATERAL MATERIEL” and using unit items shall be held by using organizations for application to the replacement end item.

CHANGES

15. Changes to this publication will be kept current by downloading the current edition from the Marine Corps

Technical Publications Website or via the SL-1-2/1-3 Resources Website located at https://mceits.usmc.mil/sites/pubs/default.aspx.

REQUISITIONING OF PUBLICATIONS

16. This SL-3 is Electronic Distribution Only (EDO) and can only be downloaded from the Marine Corps Technical

Publications Website or SL-1-2/1-3 Resources Website located at https://mceits.usmc.mil/sites/pubs/default.aspx.

PUBLICATIONS FEEDBACK

17. Discrepancies or suggested changes for this publication may be reported by submitting a NAVMC 10772. For instructions on how to submit a NAVMC 10772 go to http://www.marcorsyscom.marines.mil/Professional-Staff/SEAL/ALPS/ and click on "NAVMC 10772 Submittal."

Questions or concerns regarding the NAVMC 10772 program should be reported via email to

SMB.LOG.Tech.Pubs.fct@usmc.mil. A response will be provided to you.

MISCELLANEOUS

18. For full information concerning the Marine Corps Stocklist publications, see the current edition of

MCO 5215.17_, The Marine Corps Technical Publications System.

19. Some items may be listed in the SSRI section of this SL-3 and are duplicated in the UURI section to assure that units with unique quantity requirements for certain items are authorized to obtain them.

20. Items without NSNs assigned should be requisitioned by part number and Commercial And Government Entity

(CAGE) code, or drawing number and CAGE code. When NSNs are assigned to these items, changes to this publication will be published.

https://mceits.usmc.mil/sites/pubs/default.aspx https://mceits.usmc.mil/sites/pubs/default.aspx http://www.marcorsyscom.marines.mil/Professional-Staff/SEAL/ALPS/ mailto:SMB.LOG.Tech.Pubs.fct@usmc.mil v

3810-01-538-4030 ALL TERRAIN CRANE EA

TECHNICAL DATA

FUNCTIONAL DESCRIPTION:

As illustrated in Figure 1, the All-Terrain Crane (ATC) is a rubber tired, hydraulic boom, all terrain crane capable of lifting and swinging a maximum of 80,000 pounds. The ATC will support construction and material handling tasks, as well as, loading and unloading supplies and equipment. It is used to load/unload bulk cargo from fixed port or pier, on and off runways, and over unprepared and uneven surfaces. The ATC is capable of being driven over primary and secondary highways to include sand, snow, and mud. The ATC is fielded with a set of lifting slings with a capacity of 40 tons.

PHYSICAL CHARACTERISTICS:

OPERATING / SHIPPING MODE

Weight 72,080 lbs.

Length 450 in.

Width 102 in.

Height 142 in.

Cube 3,771 ft2

GENERAL REQUIREMENTS:

A bottom lift sling is provided that allows the crane to lift 20 and 40 foot containers. The bottom lift sling is mounted on the rear of the crane and contains 9 parts.

ASSOCIATED EQUIPMENT:

TAMCN B0170, NSN 3815-01-551-5938, Bucket, Clamshell: The Bucket Clamshell is a hydraulically operated and capable of working at and above ground level. It is capable of digging loose to medium type soils, suitable for excavating vertical shafts, filling bins and unloading aggregate from flat bottom gondola rail cars.

TAMCN B0176, NSN 3815-01-599-9078 Bucket, Concrete: The Bucket Concrete is an upright type that can be used on any crane with at least one drum and sufficient capacity to handle the bucket with wet concrete loads of approximately 3,550 pounds.

*Both items listed above are in the UURI section of this SL-3 and have “used with” association to the B0038.

vi

Figure 1. All Terrain Crane

DATE OF PUBLICATION: 31 JULY 2017 SERIAL NUMBER OF END ITEM: _______________

END ITEM NOMENCLATURE: ALL TERRAIN CRANE, MAC 50 INVENTORY SHEET: _______ of ______

ITEM

NO.

NSN

IDENTIFICATION

U/ M

QTY

IN

UNIT

PERIODIC INVENTORY

(See paragraph 10 in Preface.)

USING UNIT

REMARKS J

a n

F e b

M r

A p r

M y

J u l

A g

S p

O c t

N o

D c

SUPPLY SYSTEM RESPONSIBILITY

1 4730-01-552-7802 ADAPTER, Slew Gear:

PN 00190312 CAGE 49175

EA 1

4010-01-553-9083 CHAIN Assembly (Main Lift Sling):

PN 21839212 CAGE 49185

EA

3 4720-01-553-9654 HOSE ASSEMBLY, Nonmetallic:

PN 49062340 CAGE 49185

EA 1

HOSE, Nonmetallic, Inflating:

PN 49072440 CAGE 19185

EA 1

5 4720-01-558-6440 HOSE, Assembly, Nonmetallic, Drain:

PN 60495640 CAGE 49185

6 6220-01-558-9012 LIGHT, Hazard Warning:

PN 24090712 CAGE 49185

Inventory Legend: √ = Complete M = Missing U = Unserviceable

1 2 3 4 5 6

Figure 2. Miscellaneous Parts and Tools (Sheet 1 of 7)

END ITEM NOMENCLATURE: ALL TERRAIN CRANE, MAC 50 INVENTORY SHEET: _______ of ______

UNIT

PERIODIC INVENTORY

r

A p r

M l

A t

N c

SUPPLY SYSTEM RESPONSIBILITY

7 3810-01-553-4182

OUTRIGGER PAD ASSEMBLY;

PN 19577512 CAGE DE524

EA 4

PIN, Lock, Outrigger Pad;

PN 42556812 CAGE 49185

EA 8

9 4320-01-554-0412 PUMP, Reciprocating:

PN 27476212 CAGE 49185

EA 1

10 8145-01-499-9928 SLING, Bottom Lift:

PN Q2500AA-400 CAGE 65059; c/o

1-LIFTING RING, 1.75in dia. X6:

PN Q2500AA-400-1 CAGE 65059

1-SHACKLE, W/Bolt, Nut, Cotter:

PN Q2500AA-400-2 CAGE 65059

1-STRONGBACK ASSEMBLY:

PN Q250500-IPA CAGE 65059

EA

2-GR80 CHAIN, 600in. lg.:

PN A2500AA-400-4 CAGE 65059

EA

4-CHAIN SHORTENER:

PN Q2500AA-5 CAGE 65059

7 8 9 10

11 12 13 14 15

Figure 2. Miscellaneous Parts and Tools (Sheet 2 of 7) r

A p r

M l

A t

N c

SUPPLY SYSTEM RESPONSIBILITY

8-CHAIN CONNECTOR:

PN Q2500AA-400-6 CAGE 65059

4-SHACKLE, W/Bolt, Nut, Cotter:

PN Q2500AA-400-7 CAGE 65059

4-ROTORY LIFT LUG:

PN 41600B-XPA CAGE 65059

P N 4 1 6 0 0 B - X P A

C A G E 6 4 0 5 9 49185

1-SHIPPING CONTAINER:

PN Q2500AA-B CAGE 65059

16 17 18 19

Figure 2. Miscellaneous Parts and Tools (Sheet 3 of 7)

REMARKS

J r

A p r

M l

A t

N c

USING UNIT RESPONSIBILITY

20 3815-01-551-5938 BUCKET, Clamshell, TAMCN B0171:

PN KM602 CAGE E3WK0

AR

3815-01-599-9074 BUCKET, Concrete, TAMCN B0176:

PN BOS-BNN-750 CAGE 1P5S1

22 4020-00-350-3849 ASSEMBLY, Rope Fiber, Single Leg:

PN 1803-60 CAGE 75347

EA AR

6545-00-656-1094 KIT, First Aid:

PN 2114011 CAGE 0FTT5

20 21 22 23

Figure 2. Miscellaneous Parts and Tools (Sheet 4 of 7)

REMARKS

J r

A p r

M l

A t

N c

USING UNIT RESPONSIBILITY

8418-00-634-5021 GLOVES, Men:

PN A-A-050021 CAGE 58536

9415-00-935-3139 HELMET, Safety:

PN ISEA/ANSI Z89.1 CAGE 80204

26 4910-00-806-8185 INFLATOR-GAGE, Pneumatic Tire:

PN 506 CAGE 94894

EA AR

27 5210-00-527-9429 TAPE, Measuring, 100 ft:

PN HW226ME CAGE 65LN0

24 25 26 27

Figure 2. Miscellaneous Parts and Tools (Sheet 5 of 7)

U/ r

A p r

M l

A t

N

5210-01-428-5603

002-026 CHALK LINE, 100 ft::

PN 47-099 1CV05

AR To be used with Item No. 15

5210-01-428-5603 CHALK LINE, 100 ft:

PN 47-099 1CV05

29 5210-00-720-7982 LEVEL, Plumb, Aluminum, 48in:

PN 5210007207982 CAGE 80244

30 5210-00-926-5430 LEVEL, Aluminum, 28in:

PN 5210009265430 CAGE 80244

5210-00-022-1143 PLUMB, Bob:

PN GGG-P-501 CAGE 81348

4930-00-253-2478 LUBRICATING, Gun:

PN 1142 CAGE 1PL57

33 4930-01-448-9237 LUBRICATING, Gun, Flexible:

PN 1133 CAGE 1PL57

28 29 30 31 32 33

Figure 2. Miscellaneous Parts and Tools (Sheet 6 of 7)

U/ r

A p r

M l

A t

N

4920-01-420-6291 PROTRACTOR, Utility:

PN KS5549 CAGE 75245

9905-00-148-9546 SET, Reflector Highway:

PN 11669000 CAGE 19207

ST

36 8415-01-394-0216 VEST, High Visibility:

PN TS0216 CAGE 1A863

EA AR

37 5210-01-430-6123 CALIPER, Dial:

PN 120-12 CAGE 57163

EA AR

GAUGE, Sheave:

PN SVG23 CAGE 0GPW6

EA AR

39 3810-01-657-3044 PAD, Outrigger Support, 36in x 36in x 2in:

PN 2003636BLACKOUTRIGGER

CAGE 0BLG3

EA 4

40 4210-01-553-8909 EXTINGUISHER, Fire:

PN 28949412 CAGE 49185

34 35 36 37 38 39 40

Figure 2. Miscellaneous Parts and Tools (Sheet 7 of 7)

SIGNED BY SUPERVISED BY DATE

(Signature of person conducting inventory) (Signature of person certifying/supervising inventory) (Date inventory completed)