M67854-14-Q-5025-0002.doc

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0003

The CLIN description has changed from Transportability Report to Transportability Report - Deleted.

The pricing detail quantity has decreased by 1.00 from 1.00 to 0.00.

CLIN 0004

The CLIN description has changed from Repair and Refurbishment to Repair and Refurbishment- Deleted.

The pricing detail quantity has decreased by 1.00 from 1.00 to 0.00.

CLIN 0008

The CLIN description has changed from Operator Training to Operator Training - Deleted.

The pricing detail quantity has decreased by 1.00 from 1.00 to 0.00.

The following have been modified:

STATEMENT OF WORK

Statement of Work (SOW) for the Xtreme XR 2450 Telehandler

1.0 SCOPE.

This Statement of Work (SOW) establishes the scope of effort and sets forth tasks that shall be performed by the contractor to provide the United States Marine Corps with this capability.

2.0 APPLICABLE DOCUMENTS.

The following documents form a part of this SOW to the extent specified. Unless otherwise specified, the issues of these documents are those listed in the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto which are in effect on the date of solicitation. In the event of conflict between the documents referenced herein and the contents of this SOW, the contents of this SOW shall be the superseding requirement.

2.1. Military Standards (MIL-STD).

MIL-STD-129

DoD Standard Practice: Military Marking for

Shipment and Storage

MIL-STD-130

DoD Standard Practice: Identification Marking of U. S. Military Property

MIL-STD-1366

DOD Standard Practice: Transportability Criteria

2.2. Other Government Documents and Publications.

TM 10510-OD/1H_

General Purpose Test Measurement and Diagnostic Equipment (TMDE)

2.3. Non-Government Documents and Publications.

ANSI/ITSDF B56.6

Safety Standard for Rough Terrain Telehandler Trucks

2.4. Copies of Documents.

Copies of Military Standards and Specifications are available from the DoD Single Stock Point, Document Automation and Production Service, Building 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, commercial telephone number (215) 697-6257/6396, DSN 442-6257/6396, or on the Internet at http://quicksearch.dla.mil. Copies of other Government documents and publications required by Contractors in connection with specific SOW requirements shall be obtained from the Commanding General (P821A), Marine Corps Logistics Command, 814 Radford Blvd., Suite 20250, Warehouse 1121, Albany, Georgia 31704-0250, commercial telephone number (229) 639-5818/8988 or DSN 567-5818/8988.

3.0 REQUIREMENTS

The contractor shall perform all tasks and provide all materials, equipment, hard tooling, personnel, and facilities required to manufacture, fabricate, integrate, produce, and deliver the types and quantities of deliverables specified in the contract. This includes associated documentation; logistics, technical and field service support; a training package; and technical manuals.

3.1. System Performance

The contractor shall provide a rough-terrain telehandler with a Tier III compliant turbo-diesel engine fulfilling the following performance requirements:

3.1.1. Load Capacity

The telehandler shall be capable of safely lifting and travelling with loads up to 20,000 lb over all types of terrain in all types of climatic and illumination conditions. The telehandler shall be capable of safely lifting loads up to 9,000 lb up to a height of at least 50 ft and up to a forward reach of at least 36 ft. The telehandler shall meet all safety requirements of American National Standards Institute (ANSI)/Industrial Truck Standards Development Foundation (ITSDF) B56.6 for the specified capacities. The contractor shall provide the Government with a written certification confirming the telehandler meets this requirement.

3.1.2. Tires

The telehandler shall be equipped with foam-filled tires which do not degrade the load-carrying capabilities of the system when travelling over improved, unimproved, cross country, and rubble terrains.

3.1.3. Attachments

The contractor shall deliver the following attachments that are interoperable with the telehandler: two separate fork carriages (48-inch tines and 72-inch tines), a bucket (2.0 cubic yards) and a 4’ x 10’ work platform (1,000 lb capacity). The boom shall be equipped with a lifting hook capable of lifting sling loads up to the rated capacities.

3.1.4.

Delivery Requirement

The telehandler must meet a required delivery date of 60 days after contract award. This includes delivery of the telehandler (meeting all requirements and specifications), all attachments, and foam-filled tires.

4.0 LOGISTICS SUPPORT

4.1. Bill of Materials (BOM).

The contractor shall provide the government with an Engineering BOM containing a list of the components of the telehandler. This list shall include all items that make-up the installation kit for each of the host machines. The BOM list shall include at a minimum, the nomenclature, NSN (if available), part number, quantity and description.

4.2. Basic Issue Items (BII).

The contractor shall provide BII for the system. BII are those minimum items essential to place the system in operation, to operate it, and to perform routine operator maintenance and emergency repairs which cannot be deferred until completion of an assigned mission. These may include those select common and special purpose tools, operator publications, and safety equipment (i.e. fire extinguishers) authorized for the system. The contractor shall over-pack the BII list and the components of the BII with each system.

4.3. Consumables.

The contractor shall provide a parts package consisting of air/oil filters and belts to satisfy the first year’s scheduled maintenance requirements.

4.4. Commercial Manuals (CM).

The contractor shall provide all commercial manuals that support the operation and maintenance of the telehandler. The commercial manuals will be over-packed with the telehandler.

4.5. Warranty.

The contractor shall include a standard commercial warranty and provide a description of warranty terms and conditions.

5.0.

Security Requirements

The information provided to the contractor will be unclassified and/or sensitive unclassified information. The contractor is not required or expected to have a Facility Clearance and contractor personnel supporting this effort are not required to possess Personnel Clearance Levels. Any contractor personnel requiring access to U.S. Government sensitive unclassified information shall possess a completed background investigation (minimum of a NACI) for this Public Trust Position.

Common Access Cards (CACs) will only be issued to those contractors supporting this contract that have been authorized by the COR. The COR will only authorize CACs for those contractors that meet current Homeland Security Presidential Directive – 12 (HSPD-12) criteria and have a definitive requirement. CACs are not issued for convenience.

(End of Summary of Changes)