Kellogg_Park_ITB_25-07_Electrical_BDAR5-LED_(1).pdf
PDF 249 KB Posted
- Attached to
- Kellogg Park Nature Center State and local contract opportunity
- Solicitation number
- 25-07
- Issued by
- Bay County, Florida
About this file
This is an Invitation to Bid (ITB) document issued by the Bay County Board of County Commissioners in Florida for the demolition and reconstruction of ADA-compliant public beach access #16 in accordance with VBA Design drawings. The project involves the construction of a 1,631 square foot two-story community building with a porch, spiral staircase to an observation level, and minor parking lot improvements. Bidders must be Florida-licensed Building or General Contractors and submit sealed paper or electronic submissions by 2:00 pm on Thursday, November 14, 2024, with public opening immediately following the deadline. A mandatory pre-bid meeting is scheduled for Tuesday, October 15, 2024, at 10:00 am (CDT) in the County Purchasing Department. The contract duration is 300 days to substantial completion with an additional 30 days for punch list completion, though conflicting documentation also references a 45 calendar day contract term with liquidated damages of $100 per day for late completion.
Bidders must submit a 5% bid bond along with comprehensive documentation including an Anti-Collusion Clause, Conflict of Interest Disclosure, Drug Free Workplace certification, and proof of appropriate licensing and E-Verify compliance. The project is funded through the American Rescue Plan Act (ARPA) - Local Assistance and Tribal Consistency Fund (LATCF). The County has obtained necessary regulatory permits, including a Florida Department of Environmental Protection permit and a Northwest Florida Water Management District permit. The bid documents include multiple technical components such as civil plans, electrical submittals (including LED lighting specifications from U.S. Architectural Lighting), structural plans, photometric plans, plumbing submittals, and a geotechnical report. The contract will be awarded to the lowest responsive, responsible bidder providing the lowest qualified Lump Sum Price, with the County reserving the right to reject any or all bids. No specific set-aside designations or restrictions for disadvantaged enterprises are explicitly outlined in the solicitation.
View the file
Other files for this state and local contract opportunity
Show all 46
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.com
U.S. Architectural L ight ing
B D A R 5
PROJECT NAME:
B D A R 5 S E R I E S - L E D
2013252
S P E C I F I C A T I O N S
GENERAL
Durable corrosion resistant extruded aluminum riser with a minimum wall thickness of .125”. Top cap and vertical support flanges are cast aluminum (A356 alloy;
<0.2% copper) construction and compress si l icone gaskets top and bottom of the injection molded clear Fresnel lens. Base Plate cover is spun aluminum.
VERTICAL SUPPORTS
Sol id aluminum rod dri l led and tapped to accept stainless hex head screws.
SHIELDS/REFLECTORS
Angled Reflector (AR) is spun construction of .080” heavy wall aluminum. Flat Rings (FR) are cast aluminum (A356 alloy; < 0.2% copper) construction.
LED POWER ARRAYTM
Three-dimensional array consisting of 6 individual LED tubes fastened to a retaining plate equally spaced to provide 360° of even illumination output. Each LED tube consists of a circuit board populated with a multiple of LED’s which is fastened to a radial aluminum heat sink. A white acrylic lens and end caps protect each LED tube’s internal components and provides diffusion to prevent shadowing and striations.
LED EMITTERS
High Output LED’s are driven at 350mA for nominal 1 Watt output each. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
LED DRIVER
UL and CUL recognized Constant Current LED drivers operate on input voltages from 120-277VAC, 50/60hz. Consult Factory for (347-480VAC). Driver is mechanically fastened to a retaining bracket. Driver has a minimum 4KV of internal surge protection, 10KV & 20KV Surge Protector optional. Dimmable and High-Low Driver options available.
FINISH
Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.
PATENT PENDING
10" 254mm
7.5" DIA.
191mm
(BOLT CIRCLE)
8" 203mm
42" 1067mm
HAND HOLE
LOCATION
S O L I D S T A T E B O L L A R D S FIXTURE TYPE:
# of LEDs COLOR
36LED
(42 Watts)
24LED
(28 Watts)
NW (4000K)
Standard
CW (5000K)
WW (3000K)
S P E C I F I C A T I O N S
BDAR5 SER IES - LED
30"
36"
BDAR5-LED
INTERNAL HOUSE SIDE SHIELD. . . . HS
660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.com
U.S. Architectural L ight ing
FINISHBOLLARD OPTIONS
O R D E R I N G I N F O R M A T I O N
BOLLARD FINISH OPTIONS
DARK BRONZE
RAL-8019-T
GREEN
RAL-6005-T
WHITE
RAL-9003-T
GREY
RAL-7004-T
BLACK
RAL-9005-T
STANDARD
TEXTURED FINISH
FOR SMOOTH FINISH
REMOVE SUFFIX “T”
(EXAMPLE: RAL-9500)
SEE USALTG.COM FOR
ADDITIONAL COLORS
OPTICS
OPTICS LED MOUNTING
# of LED’s COLOR VOLTAGE MOUNTING
DUPLEX RECEPTACLE . . . . . . . . . . DUP
GROUND FAULT
RECEPTACLE . . . . . . . . . . . . . . . . . GFI
OPTIONAL HEIGHTS:
HIGH-LOW DIMMING FOR
HARDWIRED SWITCHING OR
NONINTEGRATED MOTION
SENSOR . . . . . . . . . . . . . . . . . . . HLSW
DIMMABLE DRIVER
(0-10V PROVIDED) . . . . . . . . . . . . DIM
FLAT RING . . . . FR
ANGLED
REFLECTOR . . . AR
VERTICAL
RIBS . . . . . . . . . VR
OTHER LED COLORS
AVAILABLE
CONSULT FACTORY
VOLTAGE
10KV SURGE
PROTECTOR. . . . . . . . . . . . . . . . . 10SP
20KV SURGE PROTECTOR
(277V & 480V Only) . . . . . . . . . . . . . 20SP
WATTS ARE MAX
INOUT WATTS
GROUND
INSTALLATION
FR
AR
AR-FR2
FLAT RING
REFLECTOR
ANGLED
REFLECTOR
w/ 2 FLAT
RINGS
VRVERTICAL RIBS
7.5" DIA.BOLT CIRCLE
10"
BASE PLATE DIA.
ANCHOR BOLT(4) 3/8" X 10"
OPTICSINSTALLATION
VPA - Vertical Array Available in:
36 LED Max.
8" (203mm)
42" (1067mm)
WIRING AND
FOOTING BY
OTHERS
2"(51mm)
MINIMUM
ANCHOR BOLT
PROJECTION
*When mounting in soil, anchor bolt fasteners and other hardware must be protected from soil by grouting.
ANGLED REFLECTOR
WITH 2 FLAT RINGS
. . . . . . . . . . . . AR-FR2
(SEE NOTE)*
File details come from the government source that posted it. Updated .