K3 - Campuswide Interior Glazing PD _ Samples Resubmittal_Part2.pdf

1-866-466-9525 www.VISTAMATIC.com

Patent Pending No. 14/006,399

!"#$%&'()*+,#&-+.'/0*&1"'2!(/3

T he Impact Absorption System, also known as IAS, is a patent pending (No.

14/006,399) damper system that glides the Privacy Control Pane (middle sheet of glass) from open to close, smoothly and quietly allowing for privacy or observation.

Note: The IAS is standard in every Vision Panel within the *MAX product line.

Gliding System to

Transition from

Observation to Privacy

Smoothly and Quietly.

*Restrictions apply

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

SUBMITTED/APPROVED

UNDER 08 80 00-05.

Specifications

08 88 00-1

SECTION 08 88 56 - Ballistic Resistant Glazing

SWITCHABLE PRIVACY GLASS VISION PANELS

Copyright 2010 - 2014 ARCAT, Inc. - All rights reserved

** NOTE TO SPECIFIER ** Vistamatic LLC; switchable privacy glass vision panel products.

This section is based on the products of Vistamatic LLC, which is located at:

4373 NW 124th Avenue, Coral Springs, FL 33065

Toll Free Tel: 866-466-9525

Email: request info (kevin@vistamatic.com) Web: www.vistamatic.com

VISTAMATIC® is a world leading designer and manufacturer of Glazed Secure Vision Panels used in hundreds of hospitals, medical facilities, high security environments, corporations and universities across the world. For over 25 years, we‘ve in-novated window panel design and technology to meet your commercial needs. Our wide range of options, design formats and product applications mean that architects, designers and door manufacturers �nd simple, durable, re�ned and a ordable solutions to �t the unique requirements of their projects. Easy to install, our switchable privacy glass vision panels o er a variety of sizes, dimensions and features made to �t your unique speci�cation and observation requirements. Since our secure gla-zed vision panels are virtually maintenance free, they alleviate infection control issues and concerns in properties where this is an issue. All panels can be �re rated with UL10B and C 45 and 20 minute rating.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Switchable Privacy Glass Vision Panels.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 07 90 00 - Joint Protection.

B. Section 08 11 13.16 - Custom Hollow Metal Doors and Frames.

C. Section 08 14 23.16 - Plastic-Laminate-Faced Wood Doors.

Specifications

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

Specifications- Continued

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. ASTM C 1036 - Standard Speci�cation for Flat Glass.

B. ASTM C 1048 - Standard Speci�cation for Heat-Treated Flat Glass-Kind HS, Kind FT Coated and Uncoated Glass.

C. ANSI Z97.1-2004 Glazing Materials Used in Buildings-Safety performance Speci�cations and Methods of Test.

D. Consumer Product Safety Standard (CPSC) 16 CFR 1201: Safety Standard for Architectural Glazing Materials.

** NOTE TO SPECIFIER ** VISTAMATIC® Vision Panels are typically installed as glazing in doors and vision panels in walls in the following markets: Healthcare (ER, OR, X-Ray/Laser Units, Scrub Rooms, Patient Rooms, Psychiatric Units), Schools, Colleges, Pe-nitentiaries, Police Stations, Fire Stations, Banks, O!ces, Conference Rooms, Event Centers, Airports.

1.4 SYSTEM DESCRIPTION

A. Switchable Privacy Glass Vision Panels: Vistamatic Vision Panels are a unique patented dual-position safety vision pa-nel used where there is a need for privacy coupled with the opportunity for observation without disturbance.

1.5 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer‘s data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

C. Shop Drawings: Dimensioned drawings of glazing assemblies indicating the following:

1. Elevations; include joint locations, transitions, and terminations.

2. Construction details; include fabrication details of joints, transitions and terminations.

3. Anchoring details; indicate construction activities and materials required that are not provided by glazing assemblies installer.

D. Manufacturer‘s Certi�cates: Certify products meet or exceed speci�ed requirements.

E. Closeout Submittals: Provide manufacturer‘s maintenance instructions that include recommendations for periodic checking and adjustment of cable tension and periodic cleaning and maintenance of all railing and in�ll components.

1.6 QUALITY ASSURANCE

A. Manufacturer Quali�cations: All primary products speci�ed in this section shall be supplied by a single manufacturer with a minimum of ten years experience.

B. Installer Quali�cations: All products listed in this section are to be installed by a single installer with a minimum of three years demonstrated experience in installing products of the same type and scope as speci�ed.

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

Specifications- Continued

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be speci�ed. When deciding on the extent of the mock-up, consider all the major di erent types of work on the project.

C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1. Finish areas designated by Architect.

2. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

3. Re�nish mock-up area as required to produce acceptable work.

1.7 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer‘s unopened packaging until ready for installation.

B. Provide temporary label on each light of glass identifying manufacturer, glass type, quality and nominal thickness.

C. Store in accordance with manufacturer‘s printed instructions on case. Store in areas least subject to tra!c or falling objects. Keep storage area clean and dry.

D. Unpack cases following printed instructions on case. Stack individual panels on edge leaned slightly against upright supports with separators between each.

1.8 SEQUENCING

A. Ensure that products of this section are furnished to a ected trades in time to prevent interruption of construction progress.

1.9 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufac-turer for optimum results. Do not install products under environmental conditions outside manufacturer‘s absolute limits.

1.10 WARRANTY

A. Lifetime warranty, against handle mechanism failure due to faulty workmanship.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Vistamatic LLC, which is located at: 4373 NW 124th Avenue, Coral Springs, FL 33065;

Toll Free Tel: 866-466-9525 ; Email: request info (kevin@vistamatic.com); Web: www.vistamatic.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Require-ments.

A. Lifetime warranty, against handle mechanism failure due to faulty workmanship.

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

Specifications- Continued

2.2 MATERIALS

A. Switchable Privacy Glass Vision Panels: Provide Vistamatic Vision Panels in

** NOTE TO SPECIFIER ** Select the size(s) required from the following paragraphs and delete the ones not required. Contact manufacturer for data on custom sizes.

B. Size: Panels are all-in-one triple glazed panels. Each standard unit shall be 11/16 inch (17.46 mm) thick and shall �t into standard thickness doors. Standard panel incorporates two 1/4 inch (6 mm) tempered glass on the outer panes.

1. Rectangle:

a. 10 inches (254 mm) by 10 inches (254 mm).

b. 12 inches (305 mm) by 12 inches (305 mm).

c. 18 inches (457 mm) by 18 inches (457 mm).

d. 6-1/4 inches (159 mm) 20 inches (508 mm).

e. 6-1/4 inches (159 mm) by 30 inches (762 mm).

f. 24 inches (610 mm) by 30 inches &62 mm>

g. 36 inches (914 mm) by 48 inches (1219 mm).

h. 48 inches (1219 mm) by 48 inches (1219 mm).

i. Custom size as indicated on the Drawings.

2. Round:

a. 15-3/4 inches (400 mm).

** NOTE TO SPECIFIER ** Select the glass type(s) required from the following paragraphs and delete the ones not required.

C. Glass types:

1. Heat-Treated Float Glass: ASTM C 1048; Type I (transparent "at glass).

2. Fire Safety Glass:

a. Firelite NT 3/16 inch (5 mm) Fire Resisting 20/45 minimum.

b. Pyroguard C730 1/4 inch (6 mm) Fire Resisting 20 min.

3. Medical Glass:

a. Med-XTM 1/16 inch (2.1 mm) Lead glass.

b. Med-XTM 1/16” (2.4 mm) Lead glass.

c. Med-XTM 1/8 inch (2.9 mm) Lead glass.

d. Laser Polymer.

4. Safety Glass:

a. 3/8 inch (10 mm) tempered glass.

b. Pyrosec 3/4 inch (19 mm).

c. Bullet Resistant 3/4 inch (19 mm) laminated glass.

Spec: 88000

1.5D, 2.11A

GL12

Submit which glass types will be provided.

FOR REFERENCE

ONLY. PREVIOUSLY

Specifications- Continued

d. Laser Polymer.

4. Safety Glass:

a. 3/8 inch (10 mm) tempered glass.

b. Pyrosec 3/4 inch (19 mm).

c. Bullet Resistant 3/4 inch (19 mm) laminated glass.

5. Films:

a. 3M Scotchshield Ultra Safety and Security Window Film.

6. Glass type as indicated on the Drawings.

** NOTE TO SPECIFIER ** The entire VISTAMATIC® product line o ers a choice of opacities -- view our online demonstration to experience the seamless transition from clear to your choice of opaque (allowing light), black/white (as a blackout blind), or with pictures or logos. Select the pattern required and delete those not required.

D. Opacity/Glass Patterns:

1. Natural sandblasted lines.

2. Black screened bands.

3. White screened bands.

4. Custom pattern as selected by the Architect.

** NOTE TO SPECIFIER ** Due to the thickness of the VISTAMATIC® secure glazed vision panels they can be installed in any kind of frame. Select the kit required and delete those not required.

E. Installation Kits:

1. Hollow Metal Lite Kit

2. Wood Veneer Lite Kit

** NOTE TO SPECIFIER ** Select the special features required and delete those not required.

F. Special Features:

1. Single-sided lever handle

2. Double-sided lever handle

3. Key locking knob

4. Key locking knob and ligature free knob

5. Fire Resistance; 20 minute and 45 minute with hose stream test UL 10B/C

6. X-Ray protection

7. Laser protection

8. Pictogram/Logo available

9. High security available.

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

Specifications- Continued

2.3 FABRICATION

A. Fabricate glazing units in sizes required to glaze openings indicated for Project, with edge and face clearances, edge and surface conditions, and bite complying with written instructions of product manufacturer and referenced glazing publica-tions, to comply with system performance requirements.

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until openings have been properly prepared.

1. Examine openings for glass and glazing units; determine they are proper size; plumb; square; and level before installation.

2. Verify that openings conform to details; dimensions and tolerances indicated on the approved shop drawings.

B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install in accordance with manufacturer’s instructions.

B. Set glazing without bending, twisting, or forcing of units.

C. Do not allow glass to rest on or contact any framing member.

SPEC WRITER NOTE: Select the following paragraphs in coordination with glass types speci�ed in Part 2.

D. Patterned Glass: Install units in interior partitions with pattern in same direction in all openings.

E. Insulating Glass Units:

1. Glaze in compliance with glass manufacturer’s written instructions.

2. When glazing gaskets are used, they shall be of su!cient size and depth to cover glass seal or metal channel frame completely.

3. Do not use putty or glazing compounds.

4. Do not grind, nip, cut, or otherwise alter edges and corners of fused glass units after shipping from factory.

5. Install with tape or gunnable sealant in wood sash.

F. Fire Resistant Glass: Other �re resistant glass: Glaze in accordance with UL design requirements.

G. Bullet Resisting Material: Glaze as recommended by manufacturer, using glazing material which will permit expansion and contraction of the bullet resistive material in the frame.

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

Specifications- Continued

3.4 REPLACEMENT AND CLEANING

A. Clean glass surfaces removing temporary labels, paint spots, and defacement after approval by Resident Architect.

B. Replace cracked, broken, and imperfect glass, or glass which has been installed improperly.

3.5 PROTECTION

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Substantial Completion.

3.6 SCHEDULES

** NOTE TO SPECIFIER ** Retain Paragraph below if required to suit project requirements. Identify products by name on the

Drawings or use this paragraph to de�ne the location of each type of material to be used. The following are some examples of schedule references. Edit as required to suit project or delete and identify products on the Drawings.

A. :

B. :

END OF SECTION

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

S P

E C

.5

D .1

A

G L -1

FOR REFERENCE

ONLY. PREVIOUSLY

Handle Options

Several handle op!ons are available for VISTAMATIC® Vision

Panels as well as dual or single sided func!onality. Dual or Single Sided

VISTAMATIC® Vision Panels have %e op!on to be *dual or single sided op-erable to best suit your needs and specifica!ons. Mix and mat) handle op!ons are also available.

*Restrictions may apply

LEVER HANDLE

Most common handle option with an ergonomic design.

*LIGATURE FREE KNOB

Primarily used in behavioral health environments for enhanced patient safety. *Restrictions may apply.

*KEY LOCKING KNOB

Speci�cally designed to enhance observation and privacy control with key access. Applications include behavioral health and high security environments.

*Restrictions may apply.

SLIM LINE

The Slim Line lever handle is designed to pass smoothly through sliding doors; measuring 7/16“ from the panel, the Slim Line handle allows passage through a 1/2“ opening.

DUAL-SIDED

SINGLE-SIDED

SPEC 08800

1.5D, 2.11A

GL-12

FOR REFERENCE

ONLY. PREVIOUSLY

Catalog Library Not a CRL Customer?

New Product Area

Products by Industry

Architectural Metal Systems Architectural Railing Systems Architectural Customers Automotive Products Blumcraft Display Systems Door & Window Hardware Entrance Systems Glass and Glazing Glass Machinery Hand Held and Power Tools Hospitality and Service Hardware Interior Office Partitions Jackson Exit Systems Key Control Specialists Machinery and Large Equipment Monterey Post Systems

Shower Doors Standoffs Tajima TAPER-LOC® System Transaction Hardware U.S. Aluminum UV Glass Bonding

About CRL Bulletin Board Business Policies Catalog Library Engineering Reports Hand Rails Online Trial Projects Showers Online Trial Storefronts Online Trial UPS Package Tracking User's Guide Video Library

Hand Rails Online Hand Rails Online Metric Showers Online Showers Online Metric Storefronts Online Storefronts Online Metric

Careers @CRL e-News Press Releases Technical Articles

Trade Shows Trade Associations Webinars What's New

CRL 7/8" Single Channel Back To CRL 7/8" Single Channel Models

Pricing and Ordering Information

SIGN ON HERE

If You Are in a Related Business and Have Never Purchased from CRL, CLICK HERE

Individuals and Non-Related

Businesses Can Find Out

Where to Purchase

View Larger Image

Catalog Number: D336A

Finish: SATIN !"#$%&' ANODIZED

Many Attractive

Finishes

Our CRL Top Quality Aluminum Extrusions can be used almost anywhere you can imagine a need for them. These extrusions are extremely versatile and are used for both commercial and residential applications.

The wide range of styles and types to choose from will solve almost any project dilemma while performing their structural functions.

CRL Satin !"#$%&' Anodized 7/8" Single "U" Channel

Other Products/Finishes:

More Details:

Additional Product Information:

Important Notes:

Related Items:

C.R. Laurence Co., Inc.

Sign On | Your Account | View Cart | Help | Home

Enter Your Search Word(s) Here Search

Frameless Shower Door Storefronts & Entrances Architectural Railings Architectural Metals Transaction & Hospitality

U.S. Aluminum Automotive Products Guarda Protective Screens Contact Us/ CRL Locations Quote Request

Customer Menu Bar

Searching on CRL CRL Total Search

Popular Product Lines

Products & Services

Product Finishes/Galleries

General Information

Online Applications Login

News & Events

Questions? Contact CRL Customer Service by calling (800) 421-6144 or online by clicking on Contact Us.

CRL Sitemap CRL Privacy Policy

Keep me informed about CRL special offers, exclusive products and new product information. (Enter e-mail address and click Submit) Submit

SPEC 08800

1.5D, 2.11A

GL-12

GC NOTE: REFER TO

WINDOW SHOP

DRAWINGS FOR DETAILS

FOR REFERENCE

ONLY. PREVIOUSLY

VISTAMATIC,LLC

Lifetime Warranty Against Faulty Manufacturing

If a defect in the Integrated Spindle/Cam Mechanism in your VISTAMATIC® Vision Panel occurs, VISTAMATIC, LLC will offer a repair or replacement of the product within

28 business days of the reported defect and return of faulty panel to manufacturer.

Terms and Conditions Customer is responsible for all shipping and freight fees. The warranty applies to the user/owner of the product and is not transferable. The warranty applies to the initial/original installation and does not apply to previously or post installed products. The warranty applies only to manufacturing or material defects and does not apply to normal wear and tear, inappropriate use or accidental damage during or after delivery. The warranty applies only if the product was installed according to VISTAMATIC’s specific instructions and maintenance care guidelines. The warranty applies to the Integrated Spindle/Cam Mechanism itself. The warranty is only valid for product(s) installed in the United States of America. If a product is found to be of faulty manufacturing, VISTAMATIC, LLC, reserves the right to either replace or repair the product and excludes any claim for consequential loss or damage. Should you have a claim, contact VISTAMATIC, LLC warranty department within 21 days of the fault, failure to do so may cause this warranty to be null and void.

VISTAMATIC, LLC reserves the right to charge for labor cost and replacement parts if a claim is NOT due to faulty manufacturing or components. No claim will be accepted if a product is installed with a defect; all products must be thoroughly inspected prior to installation, failure to do so may cause this warranty to be null and void. This warranty does not cover equipment, labor costs, materials, etc., which may have been damaged due to misuse, abuse or accident.

4373 NW 124th Ave.

Coral Springs, FL 33065 Phone: 1-866-466-9525 Email: ussales@VISTAMATIC.com www.VISTAMATIC.com

Lifetime WarrantyLifetime Warranty Against Faulty Manufacturing

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

"#$%&'&%#()!**(! +,-..,/..,0121! 3334"#$%&'&%#(4567!

&89:;!+1)!2<+/!

=>?9!@A;>!B6C>D)!

&D!8>9!6E9!F:D5EDD:6C!9>G?9F:CG!*HH=!59>F:ID)!6E9!"#$%&'&%#(J!":D:6C!K?C>;D!F6!C6I!?88;A!L69!?CA!*HH=!

59>F:ID!:C!IM>!*HH=!2<<0!69!*HH=!"/!9?I:CG!DADI>7D4!!

N63>O>9)!"#$%&'&%#(PD!":D:6C!K?C>;D!?9>!9>5A5;?Q;>!?CF!DEDI?:C?Q;>!L967!?!7?CEL?5IE9:CG!?CF!

7?:CI>C?C5>,L9>>!8>9D8>5I:O>4!

$:C5>9>;A)!

(?9;6D!R>I?C5E9!

$?;>D!'?C?G>9!

+,-..,/..,0121!S!+<T!

Spec: 88000

1.5D, 2.11A

GL12

FOR REFERENCE

ONLY. PREVIOUSLY

SunGuard® is a registered trademark of Guardian Industries Corp. Page 1 of 2

PERFORMANCE

CALCULATOR

February 9, 2015 By Jones, Kyle kyle@mvg-inc.com

GL13

Make-up Name Outboard

Substrate & Coating

Inboard Substrate & Coating

Transmittance Reflectance U-Value Solar Heat Gain

Coefficie nt

(SHGC)

Thermal Stress

Visible (τv %) Solar (τe %)

Visible Winter Night Summer Day (°F/C) ρv % out ρv % in

GL13 Glass Type Clear (North America)

Clear (North America) 87 68 8 8 0.96 0.88 0.75 Go

Calculation Standard: NFRC 2010

GL13 Glass Type Makeup

Thermal Stress

Guideline

(°F)

Go 110.5

Go 108.8

Outdoors

Clear (North America) Thickness = 3/16" = 5mm

#1 ----- #2 -----

LITE

0.060" (1.52mm) Saflex® RB71 Clear PVBPVB

Clear (North America) Thickness = 3/16" = 5mm

#3 ----- #4 -----

LITE

Total Unit = 0.424 in / 10.77 mm Slope = 90°

Indoors

Important Notes Calculations and terms in this report are based on NFRC 2010. The performance values shown above represent NOMINAL VALUES for the center of glass with no spacer system or framing. Slight variations may occur due to manufacturing tolerances, point of manufacture, and type of instrumentation used to measure the optical properties.

For configurations which include ceramic frit coating, the actual values may vary significantly based upon the thickness and composition of the frit. For configurations with diffuse optical properties the solar transmission is per ASTM 1084-86. For configurations with coatings laminated facing the PVB, there may be a noticeable color change. Guardian recommends that a full size mock-up be approved.

Please note that the THERMAL STRESS GUIDELINE is only a rough reference to the thermal safety of a glazing. Other factors such as the size of glass areas, shapes and patterns, glass thickness, glass damaged during shipping, handling or installation, orientation of the building, exterior shading, overhangs/fins that reduce wind speed, and areas with high daily temperature fluctuations can all increase the probability of thermal breakage. The results shown are not for any specific glazing installation and do not constitute a warranty against glass breakage.

Explanation of Terms % Transmittance Visible is the percentage of visible light at normal incidence (90° to surface) directly transmitted through the glass.

Visible Light is defined as radiant energy in the wavelength range of 380 nm to 780 nm with Ill. D65 and CIE 2° observer

% Ultraviolet (UV) Transmittance is the percentage of ultraviolet light at normal incidence (90° to surface) directly transmitted through the glass. Ultraviolet Light is defined as radiant energy from the sun having a wavelength range of 300 nm to 380 nm at ASTM air mass of 1.5

% Solar Energy Direct Transmittance is the percentage of solar energy at normal incidence (90° to surface) directly transmitted through the glass. Solar Energy is the radiant energy from the sun having a wavelength range of 300 nm to 2500 nm at ASTM air mass of 1.5.

% Reflectance Visible Outdoors is the percentage of visible light at normal incidence directly reflected from the glass back outdoors

% Reflectance Visible Indoors is the percentage of visible light at normal incidence directly reflected from the glass back indoors

% Solar Energy Reflected Outdoors is the percentage of solar energy at normal incidence directly reflected from the glass back outdoors

GL13 Glass type performance criteria, this does not represent the back-painted glass.

***NEW TO THIS

SUBMITTAL***

PERFORMANCE

CALCULATOR

SunGuard® is a registered trademark of Guardian Industries Corp. Page 2 of 2

U-Factor (also called U-Value) is the air-to-air thermal conductance of 39" (1 meter) high glazing and associated air films. Imperial Units are Btu/hr.ft².F. Winter-night = 12.3 mph wind at -0.4°F outdoors and 69.8°F still (no forced convection) indoor air. Summer = 0 sun, 6.15 mph wind at 89.6°F outdoors and 75.2°F still (no forced convection) indoor air. Metric Units are W/m2K. Winter-night = 5.5 m/s wind at -18°C & 21°C indoors. Summer = 0 sun, 2.75 m/s wind at 32°C & 24°C still indoor air.

Relative Heat Gain (RHG) is the total net heat gain to the indoors due to both the air-to-air thermal conductance and the solar heat gain. Imperial units are Btu/hr.ft². RHG = [(Summer U-Value)(89.6°F - 75.2°F) + (Shading Coefficient)(200 Btu/hr-ft²)]. Metric units are W/m². RHG = [(Summer U-Value)(32°C - 24°C) + (Shading Coef.)(631 W/m²)]

Shading Coefficient (SC) is the fraction of solar heat, direct (300 to 2500 nm) plus indirect (5 to 40 µm), transferred indoors through the glass. For reference, 1/8" (3.1 mm) clear glass has a value of 1.00 (SC is an older term being replaced by the SHGC).

Solar Heat Gain Coefficient (SHGC) is the fraction of solar energy incident on the glazing that is transferred indoors both directly and indirectly through the glazing. The direct gain portion equals the direct solar transmittance, while the indirect is the fraction of the solar energy absorbed to the energy reradiated and convected indoors. No heat gain from warmer outdoor air is included. SHGC = (Direct Solar Trans) + {[(Indirect Solar Heat Gain) - (Summer U-Value)(89.6°F - 75.2°F)] / (248.209 Btu/hr-ft²)}

Light-to-Solar Gain (LSG) is the ratio of visible light gain to solar gain. LSG = (Visible Transmittance) / (SHGC)

This performance analysis is provided under license by Guardian Industries Corp. It is designed to assist the user in evaluating the performance of the glass products identified on this report. Many factors may affect glass performance including glass size, building orientation, shading, wind speed, type of installation, and other factors. With respect to non-Guardian products, this performance analysis may be based on published information from the manufacturer that has not been independently verified by Guardian for accuracy. The applicability and results of the analysis are directly related to user inputs and any changes in actual conditions can have a significant affect on the results.

While Guardian has made a good faith effort to verify the reliability of this program, it may contain unknown programming errors that could result in incorrect results. GUARDIAN DOES NOT PROVIDE ANY WARRANTY OR GUARANTEE REGARDING THE ACCURACY OF THE INFORMATION IN THIS REPORT OR AGAINST GLASS BREAKAGE OR FOR ANY DIRECT OR INDIRECT

DAMAGES THAT MAY BE DUE TO THE USE OF THE PROGRAM.

Program Version: 4.1.0.3685 Database Version: 20150206

***NEW TO THIS

SUBMITTAL***

SPEC:088000

1.5 D, 2.5A

GL-13

Specializing in Back Painted glass for residential and commercial projects

• Commercial Interiors

• Escalator Walls

• Kitchen or Bathroom

Countertops

• White Boards

• Laundry Wall Treatments

• Wardrobe Doors

• Kitchen or Bathroom

Backsplash

• Cabinet Doors

• Signs

• Spa Walls

• Partitions

• Table Tops

• Pillars

• Mirror Borders

Summit Glass Coatings, LLC

1600 W. Evans Ave., Suite A Englewood, CO 80110

Phone: 303-781-2161

Fax: 303-762-9815 sales@summitglasscoatings.com www.summitglasscoatings.com

We specialize in painted glass for:

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Painted Glass Summit Glass Coatings uses a paint adhesion that creates a covalent bond between glass and color coating on the surface of your project. While that might not sound like a big deal, it is when it comes to the paint peeling off if a substandard process were to be used.

Just “painting” the glass is not enough for

Summit Glass Coatings. We required testing in severe conditions to make sure the bond between glass and coating could withstand the normal use of our products without any risk of failure before we moved forward on this very exciting product line.

A vast array of colors are available to create the mood and look you want for your home or business.

&A Q

Q. Can I have holes or cut-outs in the glass panels?

A. Yes. Cut-outs for outlets and holes for light switches, outlets, notches are not a problem, but must be cut or drilled prior to tempering.

Once tempered the glass cannot be cut or drilled.

Q. How much does painted glass cost?

A. Painted glass is priced per square foot (glass and paint) with additional costs for cutouts, holes, polishing or notches and installation (if applicable).

Q. What if I want a color different from your samples?

A. We are able to mix colors to order, including sparkle, pearl and metallic effects, and we will mix as close to your sample as possible.

We are able to mix all Benjamin Moore and

Sherwin Williams colors. Please be aware that colors will look much shinier through glass, so they will not necessarily look exactly the same as your paint.

Q. Can I install painted glass on top of my existing tiled wall or countertops?

A. No. We do not recommend this.

Q. How are the glass edges finished?

A. All external glass edges are either flat polished or pencil polished typically.

Q. What type of glass do we paint on?

A. We paint on Low Iron glass which is optically clearer than regular clear glass.

***NEW TO THIS

SUBMITTAL***

SPEC:088000

ChrismaColor™ Painted Glass Guide to Adhesives

Mounting Surface Preparation:

ChrismaColor™ Painted Glass can be affixed to many different type of surfaces. The key to preparing the mounting surface is make sure the surface is clean, dry, smooth, level and verifying the surface can support the weight of the glass panel(s). The installer should review and be familiar with the adhesive manufacturer’s instructions for use.

Apply the adhesive according to the adhesive manufacturer’s instructions.

Adhesives:

Summit Glass Coatings has tested Bohle’s XtraGrip and found it to be compatible with the coatings used to manufacture ChrismaColor Painted Glass. The installer should follow the adhesive manufacturer written instructions. Summit Glass Coatings advises using a mechanical fastener in addition to with adhesive to support the weight of the glass panel(s) and to secure the glass while the adhesive cures.

1600 W. Evans Ave., Unit C Phone:303-7812161

Englewood, CO 80110 Fax:303-762-9815

SUBMITTAL***

SPEC:088000

Architectural Testing

PERFORMANCE TEST REPORT

Rendered to:

SUMMIT GLASS COATINGS, LLC

PRODUCT: Back-Painted Glass

Report No: C7713.01-106-31

Report Date: 07/11/13

Test Record Retention Period: 07/11/17

130 Derry Court York, PA 17406-8405 phone: 717-764-7700 fax: 717-764-4129 www.archtest.com

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Architectural Testing

PERFORMANCE TEST REPORT

Rendered to:

SUMMIT GLASS COATINGS, LLC

1600 West Evans Avenue

Unit A

Englewood, Colorado 80110

Report No: C7713.01-106-31 Test Dates: 05/01/13

Through: 06/12/13

Report Date: 07/11/13

Test Record Retention Period: 07/11/17

Product: Back-Painted Glass

Project Summary: Architectural Testing, Inc. was contracted by Summit Glass Coatings, LLC to evaluate the coating on back-painted glass. The product description, test procedures and test results are reported herein.

Test Methods: The test specimens were evaluated in accordance with the following methods.

ASTM D 3359-09

, Standard Test Methods for Measuring Adhesion by Tape Test, Method B

ASTM D 4587-11, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

ASTM D 2244-11, Standard Practice for Calculation of Color Tolerances and Color

Differences from Instrumentally Measured Color Coordinates

ASTM B 117-11, Standard Practice for Operating Salt Spray (Fog) Apparatus

ASTM C 650-04 (Reapproved 2009), Standard Test Method for Resistance of Ceramic Tile to Chemical Substances

The test specimens were evaluated in general accordance with the following method.

AAMA 800-10, Voluntary Specifications and Test Methods for Sealants, Section 3.7

Compatibility, modified Method B

130 Derry Court York, PA 17406-8405 phone: 717-764-7700 fax: 717-764-4129 www.archtest.com

***NEW TO THIS

SUBMITTAL***

SPEC:088000

C7713.01-106-31

Architectural Testing Page 2 of 6

Product Description: The back-painted glass was submitted to Architectural Testing by Summit

Glass Coatings consisting of many nominal 6" x 3" x 1/4" thick and several 2" x 2" x 1/4" thick glass pieces with a nominal 2 to 3 mil thick white coating on one side. Refer to the photo in

Appendix A.

Test Procedures and Test Results: The results are reported in the following tables. All specimen conditioning and test conditions were at standard laboratory conditions averaging 68.5

°F and 50.0% relative humidity unless otherwise stated. Refer to the photos in Appendix A.

ASTM D 3359 - Adhesion by Tape Test

Six cuts 2 0 mm apart and parallel to each other were made through the coating to the substrate and then six more cuts were made 90° to and centered on the original cuts to produce a cross-cut grid of 25 squares. Pressure sensitive tape was applied over the grid and then peeled off at a 180° angle within 90 ±30 seconds.

Adhesion of Coating to Glass

Specimen Rating Comments

1 5B None of the squares of the grid were detached

2 4B Small piece of coating flaked off in one square

3 5B None of the squares of the grid were detached

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Architectural Testing Page 3 of 6

Test Procedures and Test Results: (Continued)

ASTM D 4587 and ASTM D 2244 - UV Exposure and Color Differences Specimens were exposed with the glass side facing the light in a QUV Accelerated Weathering

Tester (ICN Y000174 and 005419) to UVA-340 bulbs for 500 hours with the following repeating cycle: 8 hours UV at 60 °C then 4 hours condensation at 50 °C. The specimens were situated 2" from the UVA bulbs. Color readings of the coating were taken from the glass side before and after exposure utilizing a GretagMacbeth Color i5 Spectrophotometer (ICN 004725) with a diffuse spherical geometry and a xenon lamp, CIE 1964 color space, D65 illuminant and 10° observer. A glossy white background was used for the color readings.

Color Readings at 255.5 Hours

Specimen Before Exposure At 255.5 hrs Exposure Change in Color

L* a* b* L* a* b* AL* Aa* Ab* AE*

1 74.72 -0.83 0.58 74.38 -0.91 0.60 -0.34 -0.08 0.02 0.35

2 74.76 -0.81 0.62 74.42 -0.88 0.64 -0.34 -0.07 0.02 0.35

3 74.41 -0.81 0.58 74.03 -0.91 0.68 -0.38 -0.10 0.10 0.40

4 74.51 -0.83 0.62 74.14 -0.92 0.72 -0.37 -0.09 0.10 0.39

5 74.67 -0.81 0.61 74.31 -0.92 0.71 -0.36 -0.11 0.10 0.39

6 74.71 -0.80 0.61 74.38 -0.92 0.67 -0.34 -0.12 0.05 0.36

7 74.77 -0.81 0.60 74.45 -0.89 0.60 -0.32 -0.08 0.00 0.33

8 74.42 -0.82 0.61 74.17 -0.93 0.69 -0.24 -0.11 0.07 0.27

9 74.12 -0.87 0.69 73.69 -0.94 0.77 -0.42 -0.07 0.08 0.44

Average -0.35 -0.09 0.06 0.36

Color Readings at 500 Hours

S pecimen Before Exposure At 500 hrs Exposure Change in Color

L* a* b* L* a* b* AL* Aa* Ab* AE*

1 74.72 -0.83 0.58 74.50 -0.88 0.58 -0.21 -0.05 0.00 0.22

2 74.76 -0.81 0.62 74.58 -0.88 0.63 -0.18 -0.07 0.01 0.19

3 74.41 -0.81 0.58 74.14 -0.87 0.63 -0.27 -0.06 0.05 0.28

4 74.51 -0.83 0.62 74.29 -0.87 0.67 -0.21 -0.04 0.05 0.22

5 74.67 -0.81 0.61 74.51 -0.90 0.65 -0.16 -0.10 0.04 0.19

6 74.71 -0.80 0.61 74.53 -0.86 0.64 -0.18 -0.06 0.03 0.19

7 74.77 -0.81 0.60 74.64 -0.90 0.65 -0.13 -0.09 0.05 0.16

8 74.42 -0.82 0.61 74.30 -0.92 0.68 -0.11 -0.09 0.06 0.15

9 74.12 -0.87 0.69 73.86 -0.90 0.72 -0.26 -0.04 0.03 0.26

Average -0.19 -0.07 0.04 0.21

Note: There were no visual changes to the specimens as a result of the UV exposure.

***NEW TO THIS

SUBMITTAL*** SPEC:088000

Architectural Testing Page 4 of 6

Test Procedures and Test Results: (Continued)

ASTM B 117 - Salt Fog Exposure

Specimens were placed on a slight angle coating side up in an Engelhard exposure chamber (ICN

005575) with continuous corrosive fog at 35 ±2 °C (95 ±3 °F) and 5% salt solution. At the end of the 250 hour exposure, the specimens were rinsed with warm water and evaluated.

Salt Fog Exposure

Specimen Observations

1 No change or damage to the coating or glass

2 No change or damage to the coating or glass

3 No change or damage to the coating or glass

4 No change or damage to the coating or glass

5 No change or damage to the coating or glass

6 No change or damage to the coating or glass

ASTM C 650 - Resistance to Chemical Substances A test tube containing a test solution was inverted on the coating for 24 hours. After the specimen was rinsed to remove residual test solution, it was visually observed and a pencil test performed.

Chemical Resistance

Test Solution Visual Test Pencil Test

Lysol Kitchen Cleaner Affected;

Can see test tube ring Not affected

Original Pine Sol

(Full Strength) Affected;

Can see test tube ring Not affected

Original Windex Not affected Not affected

Formula 409

All-Purpose Cleaner Not affected Not affected

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Architectural Testing Page 5 of 6

Test Procedures and Test Results: (Continued)

AAMA 800 - Compatibility

Three 1/4" beads of Bohle Xtragrip Green silicone glue were placed in contact with the coating on a piece of back-painted glass then immediately placed in a beaker and covered. A piece of back-painted glass was placed in another beaker and covered. Both beakers and their contents were conditioned for 24 hours at 25 °C ±3 °C (77 °F ±5 °F) followed by 72 hours at 82 °C ±3 °C

(180 °F ±5 °F) and then conditioned to 25 °C ±3 °C (77 °F ±5 °F) for a minimum of one hour and evaluated.

Compatibility

Test Area Observations as Compared to Control Specimen

No difference in fogging, separation, discoloration, cracking, staining, tackiness, softening or crazing of coating or sealant

No difference in fogging, separation, discoloration, cracking, staining, tackiness, softening or crazing of coating or sealant

No difference in fogging, separation, discoloration, cracking, staining, tackiness, softening or crazing of coating or sealant

Architectural Testing will service this report for the entire test record retention period. Test records that are retained such as detailed drawings, datasheets, representative samples of test specimens, or other pertinent project documentation will be retained by Architectural Testing, Inc. for the entire test record retention period.

Results obtained are tested values and were secured using the designated test methods. This report does not constitute certification of this product nor an opinion or endorsement by this laboratory.

It is the exclusive property of the client so named herein and relates only to the specimen(s) tested. This report may not be reproduced, except in full, without the written approval of

Architectural Testing, Inc.

For ARCHITECTURAL TESTING, INC.:

Dawn M. Chaney - Senior Technician Gary Hartman, P.E. - Director

Components / Materials Testing Components / Materials Testing

DMC:dmc/jas

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Architectural Testing Page 6 of 6

Revision Log

Rev. # Date Page(s) Revision(s)

0 07/11/13 N/A Original report issue.

This report produced from controlled document template ATI 00231, revised 03/21/12

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Spec: 88000

1.5D, 2.5A

GL13

Finish: P12, Toasty

SW6095, Eggshell

SPEC:088000

1.5 D, 2.5A

GL-13

Finish: P12, Toasty SW6095, Eggshell

Color for GL13 backpainted glass acceptable to JVT. Refer to additional notes in review comment narrative.

8600 Rheem Avenue n South Gate, Ca. 90280 n Toll Free (888) 789-7810 n Fax: (888) 789-7820 http://www.glasswerks.com n E-mail:glasswerks@glasswerks.com

RE: Sample Lami Warranty

TEN (10) YEAR LIMITED LAMINATED GLASS WARRANTY

GLASSWERKS LA, INC., (hereinafter called "GLASSWERKS") provides this warranty with respect to it's laminated glass to XYZ Company (hereinafter called

"PURCHASER"), and to no other company or person, for the project info in California, Packing Slip # and # .

GLASSWERKS warrants to PURCHASER for a period of TEN (10) years from date of manufacture and under normal conditions, the laminated glass shall be free of manufacturing defects resulting in edge separation that materially obstructs vision through the glass surfaces. GLASSWERK'S liability shall be limited solely to its responsibilities under the Warranty. In no event shall GLASSWERKS be liable to any person or entity for indirect, special, incidental or consequential damages or charges for any reason.

CONDITIONS THAT WILL VOID THE WARRANTY

· If the Glass surfaces or panes are broken or fractured

· If the Laminated Glass is subjected to standing water or other liquids

· If the Laminated Glass product is damaged or altered by handling, storage, fabrication, or installation contrary to industry standards and incorporated by reference to GANA (Glass Association of North America) and AAMA (American Architectural Manufacturers Association) or equivalent

· If the Laminated Glass is attacked by incompatible glazing lubricants, glazing soaps, incompatible glazing gaskets, glazing sealants, incompatible cleaning fluids, moisture or building runoff, gluing or insulation, or exposure to solvent or chemical fumes

· If the Laminated Glass was discarded or destroyed

· If the Laminated Glass is installed in water craft, solar collectors, or commercial refrigeration products

· If the Laminated Glass PVB Interlayer is cut with the assistance of flammable liquids, either ignited or non-ignited

THIS LIMITED WARRANTY CONTAINED HEREIN IS IN LIEU OF ALL OTHER

WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH

WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. THIS WARRANTY MAY

SPEC: 88000

1.5D, 2.5A

GL - 13

***NEW TO THIS

SUBMITTAL***

SPEC:088000

NOT BE CHANGED EXCEPT IN WRITING BY A DULY AUTHORIZED OFFICER

OF GLASSWERKS. GLASSWERKS SPECIFICALLY MAKES NO WARRANTY AS

TO THE SUITABILITY OF THE UNIT(S) FOR ANY PARTICULAR APPLICATION.

All warranty claims arising within the applicable period must be presented in writing as soon as possible to GLASSWERKS, accompanied where practicable by proof of purchase.

Upon verification, GLASSWERKS shall, at its option, either furnish the PURCHASER replacement glass shipped at GLASSWERKS’ expense or provide a refund of the original price to the PURCHASER. GLASSWERKS reserves the right to inspect any

LAMINATED GLASS product that is alleged to be defective prior to its removal from the glazing system, installation or fabrication location.

GLASSWERKS LA, INC.

SPEC: 88000

1.5D, 2.5A

GL - 13

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Guardian Industries – 14600 Romine Road – Carleton, Michigan 48117 – 734/654-4380

September 26, 2012

Reference: LEED 2009 for New Construction v3.0

Project Name:

Location:

Select

Fabricator:

Glazier:

Products:

To whom it may concern, Guardian’s popular SunGuard advanced architectural glass products are made at Kingsburg, CA, DeWitt, IA, Carleton, MI, Geneva, NY, and Corsicana, TX plants. These products can help projects earn

Leardership in Energy and Environmental Design (LEED) credits in up to five categories. Shown below is a brief summary of the potential LEED credits that are available for UTC when using Guardian glass for windows and façade applications.

Energy and Atmosphere Credit 1: Optimize Energy Performance (2-19 points)

Utilize SunGuard glass to increase energy performance above the prerequisite standard per ASHRAE or other applicable energy codes. Guardian float glass and SunGuard Advanced Architectural Glass products include the following products:

o SN 54, SN 62, SN 68, SNX 62/27on clear, green, UltraWhite

, CrystalGray , TwilightGreen o AG 50 and AG 43 on clear, green or CrystalGray float glass o RoyalBlue 40 on clear, green or CrystalGray float glass o Neutral 61, Neutral 50 and Neutral 40 on clear or green float glass o LightBlue 63 on clear or green float glass o Silver 20 and Silver 32 on clear or green float glass o NU 70 on clear float glass o Mirror, UltraMirror o Clear, green, UltraWhite, CrystalGray float glass

Material and Resources Credit 4: Recycled Content (1-2 points)

LEED v.3 does not allow in-plant recycled glass cullet to be counted as recycled content. Only recycled glass brought in from third-party manufacturing facilities will meet the definition of recycled content. The primary raw material for architectural glass is 72% silica sand. Trace amounts of other raw materials are present. Guardian float plants typically have 2% pre-consumer recycled content in their clear and green float glass and SunGuard glass products. UltraWhite and CrystalGray both have 0% pre-consumer recycled content. SatinDeco does not qualify as it is manufactured in Spain.

Material and Resources Credit 5: Regional Materials (1-2 points) The primary raw material for architectural glass is silica sand. Guardian’s source for silica sand is shown in the key on the following page. Guardian’s silica sand locations are within 500 miles of our float plants. To obtain this credit, building materials must be extracted, manufactured and fabricated within 500 miles of the project site.

Guardian’s independent Select

Fabricator Glass Dynamics in Stoneville, NC, is approximately 390 miles from UTC.

Material and Resources Credit 5:

Regional Materials cont.

LEED 2009 for New Construction v3.0

Clear, green, UltraWhite, CrystalGray float glass

Guardian’s popular SunGuard advanced architectural glass products are made at Kingsburg, CA, DeWitt, Guardian’s popular SunGuard advanced architectural glass products are made at Kingsburg, CA, DeWitt, Guardian’s popular SunGuard advanced architectural glass products are made at Kingsburg, CA, DeWitt, IA, Carleton, MI, Geneva, NY, and Corsicana, TX plants. These products can help projects earn

Guardian’s popular SunGuard advanced architectural glass products are made at Kingsburg, CA, DeWitt, Carleton, MI, Geneva, NY, and Corsicana, TX plants. These products can help projects earn

Leardership in Energy and Environmental Design (LEED) credits in up to five categories. Shown below Leardership in Energy and Environmental Design (LEED) credits in up to five categories.

whenis a brief summary of the potential LEED credits that are available for UTC when using Guardian glass is a brief summary of the potential LE for windows and façade applications.

SPEC: 88000

1.5D, 2.5A

GL - 13

***NEW TO THIS

SUBMITTAL***

SPEC:088000

Indoor Environmental Quality Credits 8.1 and 8.2: Daylight and Views (1-2 points)

Utilize SunGuard glass to provide building occupants with a connection between indoor and outdoor spaces, through daylight penetration and external views from regularly occupied spaces in the building.

SunGuard products can provide up to 68% visible light transmission in a standard insulating glass unit, depending on the product.

Innovation and Design Process Credit 1: Innovation in Design (1-5 points)

SunGuard advanced architectural glass products can provide energy performance that substantially exceeds LEED-NC and energy code requirements which may help contribute to this credit.

Regional Priority Credit 1: Regional Priority (1-4 points)

Can be achieved through building strategies that address important environmental issues facing the region where the project is located. The potential contribution of glass products towards this bonus credit would be based priorities as established by local USGBC chapters and regional councils.

We appreciate your interest in Guardian SunGuard products. Please visit our website at http://na.en.sunguardglass.com/IntroToAdvancedArchitecturalGlass/GreenBuilding/index.htm for more information or contact me at 734-654-4380 or lrichard@guardian.com.

Best regards, Lin Richard

Marketing Specialist

Distance from Sand Source to

Manufacturing Facility

Carleton, MI 48117 – Oregon, IL 61061

370 mi.

Corsicana, TX 75109 - Cleverne, TX

76031 - 275 mi.

DeWitt, IA 52742 - Oregon, IL 61061 -

80 mi.

Floreffe, PA 15025 - Mapleton, PA

17052 - 155 mi.

Geneva, NY 14456 - Mapleton, PA

17052 - 234 mi.

Kingsburg, CA 93631 - Ione, CA 95640

- 177 mi

Richburg, SC 29729 - Marston, NC

28363 - 120 mi

SPEC: 88000

1.5D, 2.5A

GL - 13

***NEW TO THIS

SUBMITTAL***

SPEC:088000

4964 South Redwood Rd Phone: 801-485-0091 Taylorsville, Ut 84123 Fax: 801-973-6275

In regards to GL-16 Glass

The Make-up of this Glass type will be the following:

3/16” Clear Tempered glass

.060 Clear Interlayer

¼”Pilkington Mirropane Glass

Glass Performance calculators are unable to simulate the values of this specific glass make-up

Please see sheets that follow for glass performance of Pilkington Mirropane.

GL16

SUBMITTAL***

SPEC: 088000

1.5D, 2.3D

GL-16

Pilkington Mirropane™ !"#$%&'()(*+!,(&-./+(0&1$/22&3.4&56(78/%&9!2!.6

Description

:0(/$&3.4&2;4,(!$$/6*(<&2(*;4!+%&/60&

/0=!6!2+4/+!,(&/>>$!*/+!.62<&

Pilkington Mirropane™ !" # $%&'(#) *!++$+

,-#, .+&#,&" # /!"0#1 2#++!&+ 2&,(&&% "023&.,"

#%4 ,-&!+ $2"&+/&+"5 (-&+& .1&#+ #%4 4!".+&&, /!"!$% !" +&60!+&47

Pilkington MirropaneTM 8&+9$+*#%.& :#,#

8+$40., ;$*!%#1 <1#"" =-!.>%&"" <1#"" ?02'

@!"!21&2 ,#%.& A

@!"!21&2 B&C&.,#%.& D$#,&4 ?!4&

A

@!"!21&2 B&C&.,#%.&

<1#"" ?!4& A

B&.$**&%4&4 E!F-, B#,!$

8+$G&+ <1#H!%F

!%7 **

Pilkington Mirropane™ 1/4 6 <+&) 11 68 16

8:1 ?023&.,'

"!4&IJ2"&+/&+'

"!4&

K!++$+ .$#,!%F ,$(#+4

"023&.,'"!4&

L7 =)G!.#1 /#10&" $9 8!1>!%F,$% G+$40.,!$% #+& G+$/!4&47 M7 @!"!21& 4#,# !" 2#"&4 $% 1#2$+#,$+) "G&.,+$G-$,$*&,+!. *&#"0+&*&%," (&!F-,&4 2) ,-& 9#.,$+" !% NOP;QBDPMRRS7?=: !% ET;E N!%4$( O7M "$9,(#+&7

Pilkington Mirropane™ $99&+" #% &99&.,!/&

*&#%" $9 G+$/!4!%F 0%4&,&.,&4 "0+/&!11#%.& #%4

-!F- 60#1!,) $%&'(#) /!"!$% ,$ #.-!&/& .$*G1&,&

G+!/#.)7 U% $+4&+ ,$ *#!%,#!% G+!/#.) !% ,-&

$2"&+/!%F #+&#5 ,-& 1!F-, 1&/&1 +#,!$ "-$014 2&

#, 1&#", VIL 9+$* 2+!F-, W"023&.,X "!4& ,$ 4#+>

W$2"&+/&+X "!4&7

Ideal for surveillance

Y11$(" G+!/#.) (!,- .+!"G5 0%$2,+0"!/& /!"!$%

!%,$ ,-& $2"&+/&4 +$$*7

Coating quality will meet ASTM C 1376

=-& +&C&.,!/& .$#,!%F *&&," ,-&

G&+9$+*#%.& "G&.!Z.#,!$%" #" G021!"-&47

Available in 1/4" (6mm) thickness

Pyrolytic Coating Advantage

:0+#21&5 G)+$1),!. .$#,!%F

[#"!1) -#%41&45 ,&*G&+&4 .0,5 2&%,5

1#*!%#,&45 !%"01#,&4 #%4 -&#,'",+&%F-,&%&4

;$ &4F& 4&1&,!$% +&60!+&4

@!+,0#11) 0%1!*!,&4 "-&19'1!9&

U%/&%,$+!&4 1$.#11)

B&40.& 1&#4 ,!*&" 9$+ %&( .$%",+0.,!$% #%4

+&G1#.&*&%,"

Design Considerations

Orientation

U%",#11 8!1>!%F,$% Mirropane™ (!,- ,-&

+&C&.,!/& "0+9#.& 9#.!%F ,-& 2+!F-,1) 1!, "023&.,'"!4&7

Type of lighting

?023&.,'"!4& 1!F-,!%F "-$014 2& 2+!F-, #%4 &/&%1) 4!",+!20,&4 $/&+ #11 (#11" #%4

90+%!"-!%F"5 20, "-$014 %$, "-!%& 4!+&.,1)

$%,$ ,-& $%&'(#) *!++$+7 J2"&+/&+'"!4&

1!F-,!%F "-$014 2& 4!* (!,- 1!F-, "$0+.&"

4!+&.,&4 #(#) 9+$* ,-& F1#""7

Background colors

?023&.,'"!4& "-$014 2& 4&.$+#,&4 1!F-, !% .$1$+ #%4 (!,- "-#4& ,$ .+&#,& # 2+!F-, +&C&.,&4 !*#F&7 J2"&+/&+'"!4& 4&.$+ "-$014

2& "0240&45 %$%'+&C&.,!/&5 4#+> #%4

0%!9$+*7

Distances and light levels

J% ,-& $2"&+/&+'"!4&5 >&&G G&$G1&5 $23&.,"

#%4 1!F-, "$0+.&" #, #…