JCI Temperature Humidity Sensor Cutsheet.pdf

1111 11111111111111,11111t 1,111,11111111v1.1111,1,1111111111111111

Vertical Wallbox-Mounted or Surface-Mounted NS Series Network Sensors with LCD Installation Instructions NS-BHB700x-0, NS-BHM710x-x, NS-BHR710x-0, NS-BPB700x-0, NS-BTB700x-x, NS-BTF700x-0, NS-BTJ700x-x, NS-BTK700x-x, NS-BTV700x-0

Refer to the QuickLIT website for the most up-to-date version of this document.

Applications The vertical wallbox-mounted or surface-mounted NS Series Network Sensor with LCD is an electronic zone sensor designed to function directly with Johnson Controls® BACnete Master-Slave/Token-Passing (MSTTP) digital controllers in HVAC systems. Models in this series monitor the temperature setpoint, zone temperature, and humidity, and transmit this data to a field controller on the Sensor Actuator (SA) Bus.

All models except the NS-BTF Series feature either a temperature setpoint adjustment dial or setpoint adjustment buttons. They also feature a °F/°C pushbutton and an LCD designed to make adjusting the temperature setpoint and viewing the zone temperature easier. A warmer/cooler dial is included on NS-BTF Series models for minor temperature adjustments from the setpoint.

Some models also allow occupants to view the Relative Humidity (RH) of the zone; these models include a pushbutton to toggle between temperature and RH on the display. These models also have the capability to set the default display to either temperature or RH.

A °F/°C pushbutton is available on all models to provide temperature scale options for display. A fan mode pushbutton is also included on some models to select the desired fan speed (AUTO-OFF-low-medium-high). An occupancy override function is featured on all models, which allows you to signal the controller that the space is occupied, to request an override of time-of-day scheduling. Rotating the setpoint dial or pressing either setpoint adjustment button signals occupancy. See Temperature SetDoint Adjustment/Occuoan y Override for more information.

Select models in this series also provide Variable Air Volume (VAV) balancing functionality. These models look like and perform similarly to the other network sensors but have the added capability of serving as a tool to balance a VAV box.

Depending on the model chosen, you can terminate the wires connecting the network sensor to the controller using either a modular jack or screw terminal block, offering wiring flexibility.

Note: Models featuring a modular jack are not intended for installations where daisy chaining to the MS/TP Bus is required.

All models include an SA Bus access port for connecting accessories to access the SA Bus. This feature allows a technician to commission or service the controller through the network sensor.

Note: Since some NS Series Network Sensor features are not supported in previous releases of Metasys® or Facility Explorer system software, we recommend that you keep the system software up to date.

Vertical Wallbox-Mounted or Surface-Mounted NS Series Network

Johnson 7IP Controls

WIF I IA I 1—‘.•• V I I 1.13.11011.1‘./1 I II IOU IJS.oLIVI la

Part No. 24-10094-25, Rev. P Issued January 2017

Vertical Wallbox-Mounted or Surface-Mounted kS Series Network Sensors with LCD Part 2 of 2 Compliance

C E

BACnet International

BACnet Testing Laboratoriesn' (BTL) 135-2004 Listed BACnet Smart Sensor (B-SS) Note: Excludes the NS-BTV700x-0 models.

United States UL Listed, File E107041, CCN PAZX, Under UL 916, Energy Management Equipment

FCC Compliant to CFR 47, Part 15, Subpart B, Class A

Canada UL Listed, File E107041, CCN PAZX7, Under CAN/CSA C22.2 No. 205, Signal Equipment

Industry Canada, ICES-003

Europe CE Mark — Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive.

Australia and New Zealand

RCM Mark, Australia/NZ Emissions Compliant

Dimensions (Height x Width x Depth)

4-23/32 x 3-5/32 x 1-3/8 in.

(120 x 80 x 35 mm)

Shipping Weight 0.25 lb (0.11 kg)

The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls shall not be liable for damage resulting from misapplication or misuse of its products.

European Single Point of Contact:

JOHNSON CONTROLS

VVESTENDHOF 3

45143 ESSEN

GERMANY

NA/SA Single Point of Contact:

JOHNSON CONTROLS

507 E MICHIGAN ST

MILWAUKEE INI 53202

USA

APAC Single Point of Contact:

JOHNSON CONTROLS

C/O CONTROLS PRODUCT MANAGEMENT

NO. 22 BLOCK D NEW DISTRICT

VVUXI JIANGSU PROVINCE 214142

CHINA

/Arc, Johnson VAt/

Controls Building Technologies & Solutions

507 E. Michigan Street, Milwaukee, VV1 53202

Metasys® and Johnson Controls® are registered trademarks of Johnson Controls.

All other marks herein are the marks of their respective owners. © 2017 Johnson Controls.

• II • lig, •••• • .1K. • • a •••• ••• • ••••••••. • . •• .• .

.—..—.. •••••••••• ••••••••• *v....v.. • ,••••• • ‘‘..•••••••..• •• ss •..,I 111,11.G111.1.1W11 11101.1 L.Mollsal IC

Published in U.S.A. 8 www.johnsoncontrols.com