Item Description Videoscope.pdf

PDF 215 KB Posted

Attached to
A27-022 Videoscope
Solicitation number
FA812527Q0004
Issued by

About this file

This is a Memorandum for Record documenting equipment specifications for a videoscope procurement by the AMXG group at Headquarters Air Force Sustainment Center (AFMC), Tinker Air Force Base, Oklahoma, dated 23 September 2026.

The AMXG group is requesting funds to purchase one (1) commercial off-the-shelf (COTS) videoscope that must comply with the Trade Agreements Act (TAA). The system shall weigh no more than 20 pounds, be fully assembled and ready for use, and include an operations and maintenance manual. The insertion tube must measure between 3 and 6 meters in length with a maximum outer diameter of 4 millimeters, provide a minimum 80-degree field of view with forward-facing direction and LED lighting, and maintain a minimum IP54 ingress-protection rating. Controls shall include a joystick for maneuvering with minimum four-way, 120-degree articulation at the distal end. The display and main unit must feature a color touchscreen between 6.5 and 12 inches with minimum resolution of 1,920 × 1,080 pixels, backlit display, and a support strap or handle. The videoscope shall be capable of taking live measurements including length between points, length between a point and user-defined line, orthogonal height distance, and surface area calculations, as well as modeling surfaces in three dimensions (3D). The system must be battery powered and capable of recording still images in JPEG format and videos in MP4 format, with storage capabilities for images, videos, 3D models, and measurements on a removable SD card.

View the file

Other files

File Type Posted
RFO Combo - Supply UNDER SAT Videoscope.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)

TINKER AIR FORCE BASE OKLAHOMA

23 September 2026

MEMORANDUM FOR RECORD

SUBJECT: Item Description, A27-022 Videoscope.

1. The AMXG group is requesting utilization of funds for the purchase of One (1) Videoscope.

2. The requested equipment item descriptions/specifications are outlined below.

Shall be a commercial off-the-shelf (COTS) item.

Shall be compliant with the Trade Agreements Act (TAA).

Shall have a total system weight not exceeding 20 pounds.

Shall be delivered fully assembled and ready for use.

Shall include an operations and maintenance manual.

Insertion Tube

Shall include an insertion tube with a length between 3 and 6 meters.

Shall have a maximum outer diameter of 4 millimeters.

Shall provide a minimum 80-degree field of view.

Shall have a forward-facing direction of view.

Shall include forward-facing light-emitting diode (LED) lighting.

Shall have a minimum ingress-protection rating of IP54.

Controls and Articulation

Shall have a joystick control to maneuver the videoscope.

Shall have a minimum of four-way, 120-degree articulation at the distal end of the videoscope, controllable by the joystick.

Display and Main Unit Shall include a color, touchscreen display measuring between 6.5 and 12 inches.

Shall provide a minimum display resolution of 1,920 × 1,080 pixels.

Shall include a backlit display.

Shall contain a support strap or handle to hold the main unit during use.

Measurement and Modeling Capabilities

Shall be capable of taking the following live measurements:

Length between two points.

Length between a point and a user-defined line.

Orthogonal height distance between a point and a user-defined plane.

Surface area of a user-defined region.

Shall be capable of modeling surfaces recorded in three dimensions (3D).

Power, Recording, and Storage

Shall be battery powered.

Shall be capable of recording still images in a compressed Joint Photographic Experts

Group (JPEG) format.

Shall be capable of recording videos in a Moving Picture Experts Group-4 (MP4) format.

Shall be capable of storing images, videos, 3D models, and measurements on a removable Secure Digital (SD) card.

File details come from the government source that posted it. Updated .