Item 8_LNL-1100-Series-3-Data-Sheet_tcm841-145633.pdf

Access Hardware

LNL-1100

Series 3 Input Control Module

LenelS2.com/access-hardware

Overview Series 3 LenelS2TM Input Control Module (ICM) provides the access control system with high-speed acknowledgement of critical alarm points in monitored areas. The ICM communicates directly with the Intelligent System Controller (ISC) by either 2-wire or 4-wire RS-485 communication. The ICM has 16 configurable input control points and 2 output control relays. It supports normally open, normally closed, supervised and non-supervised circuits.

The input circuits are scanned using an analog-to-digital converter. The digitized input status signal is software-monitored and controlled, so that each input point can be programmed as a supervised or non-supervised alarm point.

The output relays can also be configured for fail-safe or fail-secure operation. Each relay supports the “On,” “Off,” and “Pulse” LenelS2 OnGuard® software commands.

Features & Functionality

• Grade B, A, and AA line supervision

• 12 or 24 VDC input power

• 16 programmable supervised or non-supervised contacts

• 2 Form-C 5 A, 28 VDC contacts for load switching

• 2 dedicated inputs for tamper and power failure status

• On-board termination jumpers

• DIP switch-selectable addressing

• Elevator control, support for 128 floors

• Status LED for host communication and heartbeat

• Variable resistor values for line supervision

• Downloadable firmware

• Suitable as replacement for Series 1 and Series 2 boards

Specifications

Primary Power 12 to 24Vdc ±10%, 350mA maximum 12Vdc @ 300mA nominal, 12.27 BTUs 24Vdc @ 220mA nominal, 18.00 BTUs

Outputs 2 outputs, Form-C, 5A @ 28Vdc, resistive

Inputs 16 unsupervised/supervised, standard EOL: 1K/1K ohm, 1%, 1/4 watt 2 unsupervised, dedicated for cabinet tamper and UPS fault monitoring

Mechanical Dimension: 6” (152mm)W x 8” (203mm)L x 1” (25.4mm)H Weight: 9 oz. (250g) nominal

Environmental Temperature

Operating: 32°F to 158°F (0°C to +70°C) Storage: -67°F to 185°F (-55°C to +85°C)

Humidity 0% to 95% RHNC

Compliance Approvals FCC Part 15, CE, RoHS, UL 294, UL 1076, ULC CSA-C22.2, CAN/ULC-S319-05, cUL/ORD-C1076

Power Supplies & Enclosures

LNL-AL400ULX UL Listed 4A, 110VAC Power Supply – 12VDC 4A output, 115VAC input, continuous supply current with enclosure (15.5” x 12.5” x 4.5”), lock, tamper switch, UPS capable (Battery Optional) UL & CUL Approved

LNL-AL600ULX-4CB6 UL Listed Power Supply – 12VDC 6A output, 115VAC (1.6 amps) input, continuous supply current with enclosure (24” x 18” x 4.5”), lock, tamper switch, power distribution module, UPS capable (Battery Optional) UL & CUL Approved

ABT-12 Battery Kit - 12VDC, 12 AH battery (PS-12120)

System Diagram Intelligent System Controller (ISC) Capacity varies per ISC model*

LNL-1320

Dual Reader Interface Module

LNL-1300

Single Reader Interface Module

LNL-1100

Input Control Module Up to 16 Inputs per

LNL-1100

Motion Sensor Alarm

LNL-1200

Output Control Module Up to 16 Outputs per

LNL-1200

RS-485 Multi-drop up to 4000 ft.

Option 1

TC

P

/I P

N E

TW

O

R K

Reader Reader Reader

Option 2

OnGuard®

Security Server

-OR-

* See ISC datasheets for speci�c capacities.

LenelS2.com

(866) 788-5095

Specifications subject to change without notice.

©2017, 2021 Carrier. All Rights Reserved. All trademarks are the property of their respective owners.

LenelS2 is a part of Carrier. 2021/08

LNL-1100 Series 3