Item 5-6_Cisco Catalyst 9200 Series Switches Data Sheet - Cisco.pdf

Log in

Cisco Catalyst 9200 Series Switches Data Sheet

Introduction

Extend intent-based networking everywhere Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches o�er simplicity without compromise – it is secure, always on, and IT simpli�ed.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that ows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with dierentiated resiliency and progressive architecture for cost-eective branch-oce access.

Updated: December 1, 2022 Bias-Free Language

Save up to 25% with a Cisco DNA Starter Kit. Bundle a Cisco DNA Center appliance with eligible access devices.

See oer https://www.cisco.com/site/us/en/index.html https://www.cisco.com/c/en/us/solutions/enterprise-networks/promotions-free-trials/save-25-percent-cisco.html?oid=poden018388&ccid=cc002009

Catalyst 9200 Series switches also provide operational choice of Cisco DNA Center, or cloud monitoring for

Catalyst.

Product overview

Product highlights Full Power over Ethernet Plus (PoE+) capability for up to 48 ports for C9200 and Power over Ethernet Plus (PoE+) capability for up to 12 ports for C9200CX. Available in fan less variants for C9200CX.

Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks for C9200. C9200CX models are powered by internal xed power supply or optional power adapters, when not powered by upstream 802.3bt type4 90W PSE.

Flexible downlink options with data, PoE+ or mGig

Operational eciency with optional backplane stacking, supporting stacking bandwidth up to 160

Gbps

UADP 2.0 Mini with integrated CPU oers customers optimized scale with better cost structure

Enhanced security with AES-128 MACsec encryption on C9200 and AES-256 MACsec encryption for

C9200CX variants, policy-based segmentation, and trustworthy solutions for the whole C9200 family

Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access

Advanced network monitoring using Full Flexible NetFlow

Cisco Software-De�ned Access (SD-Access)

◦ Simplied operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)

◦ Network assurance and improved resolution time through Cisco DNA Center

Plug and Play (PnP) enabled: A simple, secure, unied, and integrated oering to ease new branch or campus device rollouts or updates to an existing network

Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry

ASIC with programmable pipeline and micro-engine capabilities, along with template-based, congurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of

Service (QoS) entries

Cloud monitoring for Catalyst option

Features and bene�ts Platform details

Switch models and con�gurations Table 1. Catalyst 9200 Series models and con�gurations

Models FRU Power Supply

FRU

Fans

Modular Uplinks

Stacking Bandwidth Support

SD-Access Support1

Modular uplink models (C9200 Enhanced VN SKUs)

✓ ✓ ✓ 160 Gbps Yes (32 Virtual

Networks)2

Modular uplink models (C9200 SKUs)

✓ ✓ ✓ 160 Gbps Yes (4 Virtual

Networks)

Fixed uplink Models (C9200L SKUs)

✓ ✗ ✗ 80 Gbps Limited (1

Virtual Network)

Compact Models (C9200CX SKUs)

Fixed internal power supply

Fanless ✗ ✗ Yes (16 Virtual

Networks)

1 Catalyst 9200 standalone and stack can support 25 Access Tunnels (for fabric enabled APs).

Note: Over the top fabric deployments eventually migrating to fabric wireless architecture should consider this limit during design/deployment

2 C9200-24PB-A, C9200-48PB-A SKUs supports 32 Virtual Networks. These SKUs cannot be stacked with C9200 SKUs with 4VNs

The Cisco Catalyst 9200 Series is made up of modular (C9200), xed (C9200L) and compact (C9200CX) switch models.

Figure 1.

Cisco Catalyst 9200 Series switches

Table 2. Cisco Catalyst 9200 Series Switch con�gurations https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.docx/_jcr_content/renditions/nb-06-cat9200-ser-data-sheet-cte-en_0.png

Switch model

Downlinks total 10/100/1000 or PoE+ copper ports

Uplink con�guration

Default primary AC power supply

Fans

Modular uplink models

C9200-24T 24 ports data Modular uplink options PWR-C6-

125WAC

FRU

redundant

C9200-24P 24 ports full PoE+ Modular uplink options PWR-C6-

600WAC

FRU

redundant

C9200-

24PB

24 ports full PoE+ Modular uplink options PWR-C6-

600WAC

FRU

redundant

C9200-

24PXG

24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G)

Modular uplink options PWR-C6-

600WAC

FRU

redundant

C9200-48T 48 ports data Modular uplink options PWR-C6-

125WAC

FRU

redundant

C9200-48P 48 ports full PoE+ Modular uplink options PWR-C6-

1KWAC

FRU

redundant

C9200-

48PL

48 Ports partial PoE+ Modular uplink options PWR-C6-

600WAC

FRU

redundant

C9200-

48PB

48 ports full PoE+ Modular uplink options PWR-C6-

1KWAC

FRU

redundant

C9200-

48PXG

48 ports full PoE+ (8 mGig ports up to 10G, Modular uplink options PWR-C6-

1KWAC

FRU

redundant

Downlinks total 10/100/1000 or PoE+ copper ports

Uplink con�guration

Default primary AC power supply

Fans

40 ports up to 1G)

Fixed uplink models

C9200L- 24T-4G

24 ports data 4x 1G xed uplinks PWR-C5-

125WAC

Fixed redundant

C9200L- 24P-4G

24 ports full PoE+ 4x 1G xed uplinks PWR-C5-

600WAC

Fixed redundant

C9200L- 48T-4G

48 ports data 4x 1G xed uplinks PWR-C5-

125WAC

Fixed redundant

C9200L- 48P-4G

48 ports full POE+ 4x 1G xed uplinks PWR-C5-

1KWAC

Fixed redundant

C9200L-

48PL-4G

48 Ports partial PoE+ 4X 1G Fixed uplinks PWR-C5-

600WAC

Fixed redundant

C9200L- 24T-4X

24 ports data 4x 1/10G xed uplinks PWR-C5-

125WAC

Fixed redundant

C9200L- 24P-4X

24 ports full PoE+ 4x 1/10G xed uplinks PWR-C5-

600WAC

Fixed redundant

C9200L- 48T-4X

48 ports data 4x 1/10G xed uplinks PWR-C5-

125WAC

Fixed redundant

C9200L- 48 ports full PoE+ 4x 1/10G xed uplinks PWR-C5- Fixed

Downlinks total 10/100/1000 or PoE+ copper ports

Uplink con�guration

Default primary AC power supply

Fans

48P-4X 1KWAC redundant

C9200L-

48PL-4X

48 Port partial PoE+ 4X 1/10G Fixed Uplinks PWR-C5-

600WAC

Fixed redundant

C9200L-

24PXG-4X

24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G)

4x 1/10G xed uplinks PWR-C5-

600WAC

Fixed redundant

C9200L-

48PXG-4X

48 ports full POE+ (12 mGig ports up to 10G, 36 ports up to 1G)

4x 1/10G xed uplinks PWR-C5-

1KWAC

Fixed redundant

Switch model

Downlinks total

10/100/1000 or PoE+ copper ports

Uplink conguration Default primary AC power supply

Fans

C9200L-

24PXG-2Y

24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G)

2x 1/10/25G xed uplinks

PWR-C5-

600WAC

Fixed redundant

C9200L-

48PXG-2Y

48 ports full POE+ (8 mGig ports up to 10G, 40 ports up to 1G)

2x 1/10/25G xed uplinks

PWR-C5-

1KWAC

Fixed redundant

Compact models

C9200CX-

12T-2X2G

12 ports data 2x 1G copper, 1x 1G

CU PD 802.3bt Class 6, 80W External

Power Adapter

Fanless

Downlinks total 10/100/1000 or PoE+ copper ports

Uplink con�guration

Default primary AC power supply

Fans

2x 10G SFP+ xed uplinks

C9200CX-

12P-2X2G

12 ports PoE+ 2x 1G copper, 2x 10G

SFP+ xed uplinks

310W internal

Fanless

C9200CX-

8P-2X2G

8 ports full PoE+ 2x 1G copper, 2x 10G

SFP+ xed uplinks

310W internal

Fanless

Network modules Cisco Catalyst 9200 Series switches come with modular or xed uplinks as indicated in Table 1. With modular SKUs, the eld-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond. When you purchase the switch, you can choose from the network modules described in Table 3.

Figure 2.

Cisco Catalyst 9200 Series Switch network modules

Table 3. Network module part numbers and descriptions https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.docx/_jcr_content/renditions/nb-06-cat9200-ser-data-sheet-cte-en_1.png

Network module Description

C9200-NM-2Y1 2 x 25G Network Module

C9200-NM-2Q1 2 x 40G Network Module

C9200-NM-4G2 4x 1G network module

C9200-NM-4X 4x 1G/10G network module

C9200-NM-BLANK No network module

1 Supported only on C9200-24PXG, C9200-48PXG

2 Not supported on C9200-24PXG, C9200-48PXG

For additional details, please read our FAQ:

https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9000/nb-09-cat-9k-faq-cte-en.pdf.

Platform resiliency

Power supplies Cisco Catalyst 9200 Series switches support dual eld-replaceable power supplies (Figure 3). Each switch ships with one default power supply, and a second identical power supply can be purchased with the initial order or can be added later. The second power supply can provide redundancy or additional power to PoE+ ports as needed.

Intelligent PoE+ IEEE 802.3at PoE+ (up to 30W per port) is supported on Cisco Catalyst 9200 Series switches to lower the total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant PoE+ end devices. PoE+ removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. With Cisco Catalyst 9200 Series https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9000/nb-09-cat-9k-faq-cte-en.pdf switches, PoE+ power allocation is dynamic, and power mapping scales up to a maximum of 1440W of

PoE+ power.

Perpetual PoE is supported on Cisco Catalyst 9200 Series switches, and maintains the PoE+ power during a switch reload. This is important for critical endpoints such as medical devices and for Internet of Things (IoT) endpoints such as PoE-powered lights, so that there is no disruption during a switch reboot.

Fast PoE: When power is restored to a switch, Fast PoE starts delivering power to endpoints without waiting for the operating system to fully load, thereby speeding up the time for the endpoint to start up.

https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.docx/_jcr_content/renditions/nb-06-cat9200-ser-data-sheet-cte-en_2.png

Figure 3.

Cisco Catalyst 9200 Series Switch dual redundant power supplies

Table 4 lists the PoE+ power availability for each model.

Table 4. PoE+ Power with primary and secondary power supplies

Model

Default primary power supply

Available PoE power with single primary power supply only*

Optional secondary power supply

Available PoE power with additional secondary power supply*

C9200-24P PWR-C6-

600WAC

370W PWR-C6-

600WAC

740W

C9200-

24PB

PWR-C6-

600WAC

370W PWR-C6-

600WAC

740W

C9200-

24PXG

PWR-C6-

600WAC

370W PWR-C6-

600WAC

740W

C9200-48P PWR-C6-

1KWAC

740W PWR-C6-

1KWAC

1440W

C9200-48PL PWR-C6-

600WAC

370W PWR-C6-

600WAC

740W

C9200-

48PB

PWR-C6-

1KWAC

740W PWR-C6-

1KWAC

1440W

C9200-

48PXG

PWR-C6-

1KWAC

740W PWR-C6-

1KWAC

1440W

C9200L- 24P-4G

PWR-C5-

600WAC

370W PWR-C5-

600WAC

740W

C9200L- 24P-4X

PWR-C5-

600WAC

370W PWR-C5-

600WAC

740W

C9200L- PWR-C5- 740W PWR-C5- 1440W

Model

Default primary power supply

Available PoE power with single primary power supply only*

Optional secondary power supply

Available PoE power with additional secondary power supply*

48P-4G 1KWAC 1KWAC

C9200L-

48PL-4G

PWR-C5-

600WAC

370W PWR-C5-

600WAC

740W

C9200L- 48P-4X

PWR-C5-

1KWAC

740W PWR-C5-

1KWAC

1440W

C9200L-

48PL-4X

PWR-C5-

600WAC

370W PWR-C5-

600WAC

740W

C9200L-

24PXG-4X

PWR-C5-

600WAC

370W PWR-C5-

600WAC

740W

C9200L-

48PXG-4X

PWR-C5-

1KWAC

740W PWR-C5-

1KWAC

1440W

C9200L-

24PXG-2Y

PWR-C5-

600WAC

370W PWR-C5-

600WAC

740W

C9200L-

48PXG-2Y

PWR-C5-

1KWAC

740W PWR-C5-

1KWAC

1440W

C9200CX-

12P-2X2G

310W Internal

240W N/A N/A

C9200CX-

8P-2X2G

310W internal

240W N/A N/A

Stacking Cisco Catalyst 9200 Series switch models are designed for stacking switches as a single virtual switch, enabling customers to have a single management plane and control plane for up to 384 access ports.

Table 5 lists the supported stacking options.

Table 5. Supported stacking options

Model Stacking support

Stacking bandwidth support

Stacking hardware

Number of members

Supported stack members

Modular models (C9200 SKUs)

StackWise-

160 Gbps C9200-

STACK-KIT

8 Other C9200 models with same license level

Fixed models (C9200L SKUs)

StackWise-

80 Gbps C9200L-

STACK-KIT

8 Other C9200L models with same license level

Mixed stacking is not supported. You cannot stack xed (C9200L SKUs) with modular (C9200 SKUs) models, or other Catalyst switches, e.g. Cisco Catalyst 2960-X and 2960-XR Series. Stacking not available on C9200CX switches.

The optional StackWise-160 and StackWise-80 kits consist of two adapters and a stacking cable. The default stacking cable is 0.5 m, but options of 1 m and 3 m are also available.

Table 6 lists the stacking accessories.

Table 6. Stacking accessories

*Limited by port number and port rating (for example, 24 PoE+ 30W ports = 720W)

Model Description

C9200-STACK-KIT Stack kit for C9200 SKUs only: Two data stack adapters and one data stack cable

C9200L-STACK-

KIT

Stack kit for C9200L SKUs only: Two data stack adapters and one data stack cable

STACK-T4-50CM Data stack 50 cm cable (default cable with Stack Kit)

STACK-T4-1M Data stack 1 m cable

STACK T4-3M Data stack 3 m cable

Figure 4.

Cisco Catalyst 9200 Series Switch stacked units

Fan Cisco Catalyst 9200 Series switches also come with dual fans and support redundancy. Cisco Catalyst 9200

Series switches support redundancy with dual fans. On the C9200 SKUs, the fan units are eld-replaceable, whereas on the xed C9200L and C9200CX SKUs, the fan units are xed.

Table 7 lists the fan module part number.

Table 7. Fan modules https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.docx/_jcr_content/renditions/nb-06-cat9200-ser-data-sheet-cte-en_3.png

Model Description

FAN-T2= Fan module

Performance and scalability Table 8 lists performance and scalability metrics for Cisco Catalyst 9200 Series switches. Table 9 lists the bandwidth specications.

Performance speci�cations Table 8. Performance speci�cations

Description C9200 SKUs C9200L SKUs C9200CX SKUs

Virtual Networks 4 for C9200-24T, C9200-24P, C9200-48T, C9200-48P, C9200-

24PXG, C9200-48PXG,

C9200-48PL

32 for C9200-24PB, C9200-48PB

1 16

Stacking bandwidth

160 Gbps 80 Gbps N/A

Total number of MAC addresses

32,000 16,000 32,000

Total number of IPv4 routes (ARP plus learned routes)

14,000 (10,000 direct routes and 4,000 indirect routes)

11,000 (8,000 direct routes and 3,000 indirect routes)

14,000 (10,000 direct routes and 4,000 indirect routes)

IPv4 routing entries

4,000 3,000 4,000

IPv6 routing entries

2,000 1,500 2,000

Multicast routing scale

1,000 1,000 1,000

QoS scale entries

1,000 1,000 1,000

ACL scale 1,600 1,500 1,600 entries

Packet bu�er per SKU

6 MB buers for 24- or 48-port Gigabit Ethernet models, 12MB buers for 24 or 48 port multigigabit models

6 MB buers for 24- or

48- port Gigabit Ethernet models, 12 MB buers for 24 or 48 port multigigabit models

6 MB buers

Flexible NetFlow (FNF) entries

16,000 ows on 24- and

48-port Gigabit Ethernet models

16,000 ows on 24- and

48- port Gigabit Ethernet models, 32,000 ows on 24 or 48 port multigigabit models

16,000 ows

DRAM 4 GB 2 GB 4 GB

Flash 4 GB 4 GB 8 GB

VLAN IDs 4096 4096 4096

PVST Instances 128 128 128

STP Virtual Ports (Port *VLANs) for

PVST

13,000 13,000 13,000

STP Virtual Ports (Port *VALNs) for

MST

13,000 13,000 13,000

Total Switched Virtual

1000 512 1000

Interfaces (SVIs)

Jumbo frames 9198 bytes 9198 bytes 9198 bytes

Wireless bandwidth per switch

Up to 48 Gbps on 24- port and 48-port Gigabit Ethernet model

N/A

IP SGT binding scale

8K 10K 8K

Number of IPv4 bindings

8K 10K 8K

Number of

SGT/DGT

policies

2K 2K 2K

Number of SXP Sessions

200 200 200

Bandwidth speci�cations Table 9. Bandwidth speci�cations

Description Switching capacity

Switch capacity with Stacking

Forwarding rate

Forwarding rate with Stacking

C9200-24T 128 Gbps 288 Gbps 95.23 Mpps 214 Mpps

C9200-24P 128 Gbps 288 Gbps 95.23 Mpps 214 Mpps

C9200-24PB 128 Gbps 288 Gbps 95.23 Mpps 214 Mpps

C9200-24PXG 352 Gbps 532 Gbps 261.90 Mpps 395 Mpps

C9200-48T 176 Gbps 336 Gbps 130.95 Mpps 250 Mpps

C9200-48P 176 Gbps 336 Gbps 130.95 Mpps 250 Mpps

C9200-48PL 176 Gbps 336 Gbps 130.95 Mpps 250 Mpps

C9200-48PB 176 Gbps 336 Gbps 130.95 Mpps 250 Mpps

C9200-48PXG 400 Gbps 580 Gbps 297.61 Mpps 431 Mpps

C9200L-24T- 4G

56 Gbps 136 Gbps 41.66 Mpps 101 Mpps

C9200L-24P- 4G

56 Gbps 136 Gbps 41.66 Mpps 101 Mpps

C9200L-48T- 4G

104 Gbps 184 Gbps 77.38 Mpps 137 Mpps

C9200L-48P- 104 Gbps 184 Gbps 77.38 Mpps 137 Mpps capacity

Switch capacity with Stacking

Forwarding rate

Forwarding rate with Stacking

4G

C9200L-48PL-

4G

104 Gbps 184 Gbps 77.38 Mpps 137 Mpps

C9200L-24T- 4X

128 Gbps 208 Gbps 95.23 Mpps 155 Mpps

C9200L-24P- 4X

128 Gbps 208 Gbps 95.23 Mpps 155 Mpps

C9200L-48T- 4X

176 Gbps 256 Gbps 130.95 Mpps 190 Mpps

C9200L-48P- 4X

176 Gbps 256 Gbps 130.95 Mpps 190 Mpps

C9200L-48PL-

4X

176 Gbps 256 Gbps 130.95 Mpps 190 Mpps

C9200L-

24PXG-4X

272 Gbps 352 Gbps 214.28 Mpps 262 Mpps

C9200L-

24PXG-2Y

292 Gbps 372 Gbps 229.16 Mpps 277 Mpps

C9200L-

48PXG-4X

392 Gbps 472 Gbps 291.66 Mpps 351 Mpps

C9200L- 340 Gbps 420 Gbps 252.97 Mpps 313 Mpps capacity

Switch capacity with Stacking

Forwarding rate

Forwarding rate with Stacking

48PXG-2Y

C9200CX-12T-

2X2G

35 Gbps N/A 51 Mpps N/A

C9200CX-12P-

2X2G

34 Gbps N/A 51 Mpps N/A

C9200CX-8P-

2X2G

30 Gbps N/A 51 Mpps N/A

* Measured with 64 byte packets

Software

Platform software bene�ts

Cisco IOS XE Cisco IOS XE Software opens a completely new paradigm in network conguration, operation, and monitoring through network automation. Cisco’s automation solution is open, standards-based, and extensible across the entire lifecycle of a network device. The various automation mechanisms are outlined below.

Automated device provisioning is the ability to automate the process of upgrading software images and installing conguration les on Cisco Catalyst switches when they are being deployed in the network for the rst time. Cisco provides turnkey solutions such as Plug and Play and Preboot

Execution Environment (PXE) that enable an eortless and automated deployment.

API-driven con�guration is available with modern network switches such as Cisco Catalyst 9200

Series switches. It supports a wide range of automation features and provides robust open APIs over

NETCONF and RESTCONF using YANG data models for external tools, both o the shelf and custom built, to automatically provision network resources.

Granular visibility enables model-driven telemetry to stream data from a switch to a destination. The data to be streamed is identied through subscription to a data set in a YANG model. The subscribed data set is streamed to the destination at specied intervals. Additionally, Cisco IOS XE enables the push model. It provides near-real-time monitoring of the network, leading to quick detection and rectication of failures. Cloud monitoring for Catalyst is also available.

Seamless software upgrades and patching supports OS resilience. On Cisco Catalyst 9200 Series switches Cisco IOS XE supports cold patching with reboot, which provides xes for critical bugs and security vulnerabilities between regular maintenance releases. This support lets you add patches without having to wait for the next maintenance release. Cold patching requires the switch to be rebooted after patching to allow the changes to take eect.

Trustworthy solutions built with Cisco Trust Anchor Technologies provide a highly secure foundation for Cisco products. With Cisco Catalyst 9200 Series switches, these technologies enable hardware and software authenticity assurance for supply chain trust and strong mitigation against man-in-the-middle attacks that compromise software and rmware. Trust Anchor capabilities include image signing, Secure Boot, and Cisco Trust Anchor module.

High availability: Cisco Catalyst 9200 Series switches support high-availability features, including the following:

◦ Cross-stack EtherChannel provides the ability to congure Cisco EtherChannel technology across dierent members of the stack for high resiliency.

◦ IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) provides rapid spanning tree convergence independent of spanning tree timers and also oers the benet of Layer 2 load balancing and distributed processing.

◦ Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning tree (IEEE 802.1w) reconvergence on a per-VLAN spanning tree basis, providing simpler conguration than

MSTP. In both MSTP and PVRST+ modes, stacked units behave as a single spanning tree node.

◦ Switch-port auto-recovery (“err-disable” recovery) automatically attempts to reactivate a link that is disabled because of a network error.

◦ The Catalyst 9200 Series platform delivers the best SSO resiliency architecture in a stackable solution with sub-50-ms failover.

The Foundation of Software-De�ned Access

Secure Segmentation with SD-Access

Software-De�ned Access The enterprise network lies at the heart of digital transformation. A network that is open, programmable, integrated, and secure maximizes business agility, allowing new business opportunities to be pursued and captured.

Cisco DNA with SD-Access is the network fabric that powers business. It is an open and extensible software- driven architecture that accelerates and simplies your enterprise network operations. The programmable architecture frees your IT sta from time-consuming, repetitive network conguration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include:

Simplied device deployment

Unied management of wired and wireless networks

Network virtualization and segmentation

Group-based policies

Context-based analytics

SD-Access: Cisco Catalyst 9200 Series switches are the entry-level devices for SD-Access, Cisco’s lead enterprise architecture, with policy-based automation from edge to cloud.

◦ Simplied segmentation and micro-segmentation, with predictable performance and scalability

◦ Automation through Cisco DNA Center

◦ Policy handled through the Cisco Identity Services Engine (ISE)

◦ Faster launch of new business services and signicantly improved issue resolution time

Assurance

◦ Full network visibility and monitoring

◦ End-to-end Quality of Experience (QoE)

◦ Fast issue resolution and network remediation

Plug and Play (PnP) enabled: A simple, secure, unied, and integrated oering to ease new branch or campus device rollouts or updates to an existing network

Cloud Security

Umbrella Integration Umbrella Integration: Small to midsize networks reliant on managed service providers can now host

Cisco Umbrella agent directly on their Catalyst 9200 series switches. This allows the business to easily customize their DNS ltering policies to prevent BYOD or IoT guest or corporate users from accessing malicious or inappropriate websites, without having to rely on the MSP to push the policies out. It also lets them optimize use of bandwidth by allowing direct cloud access for trusted apps. Requires Cisco

DNA-Advantage License and Umbrella License per device.

Full Flexible NetFlow Full Flexible NetFlow (FNF): Cisco IOS FNF is the next generation in ow visibility technology. It enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection with increased exibility and scalability. Catalyst 9200 Series switches are capable of up to 16,000 ow entries on 48-port,24, 12 and 8 port models.

QoS Superior QoS: Cisco Catalyst 9200 Series switches oer Gigabit Ethernet speeds with intelligent services that keep trac owing smoothly, even at 10 times the normal network speed. Industry-leading mechanisms for cross-stack marking, classication, and scheduling deliver superior performance for data, voice, and video trac at wire speed. Superior QoS includes granular wireless bandwidth management and fair sharing, 802.1p Class of Service (CoS) and Dierentiated Services

Code Point (DSCP) eld classication, Shaped Round Robin (SRR) scheduling, Committed Information Rate (CIR), and eight egress queues per port.

Smart operation WebUI

WebUI is an embedded GUI-based device-management tool that provides the ability to provision the device, to simplify device deployment and manageability, and to enhance the user experience. It comes with the default image, so there is no need to enable anything or install any license on the device. You can use WebUI to build congurations, and to monitor and troubleshoot the device without having CLI expertise.

RFID tags

Cisco Catalyst 9200 Series switches have an embedded RFID tag that facilitates easy asset and inventory management using commercial RFID readers.

Blue beacon

Cisco Catalyst 9200 Series switches support both front and back blue beacon LEDs for easy identication of the switch being accessed.

E�cient switch operation

Cisco Catalyst 9200 Series switches provide optimum power saving with Energy Ecient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class power management and power consumption capabilities. The ports support reduced power modes so that ports not in use can move into a lower power utilization state. Other ecient switch operation features are as follows:

◦ Per-port power consumption command allows customers to specify a maximum power setting on an individual port.

◦ Per-port PoE power sensing measures actual power being drawn, enabling more intelligent control of powered devices. The PoE MIB provides proactive visibility into power usage and allows you to set dierent power-level thresholds.

Bluetooth ready

Cisco Catalyst 9200 Series switches have hardware support to connect a Bluetooth dongle to your switch, enabling you to use this wireless interface as an IP management port interface. The port can be used for conguration and troubleshooting using WebUI or the Command-Line Interface (CLI), and to transfer images and congurations.

Storage

Cisco Catalyst 9200CX switches have hardware support for up to 4G Micro-SD card storage.

High-performance IP routing The Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in Cisco Catalyst 9200 Series switches, based on:

IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack. Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.

Advanced IP unicast routing protocols (including Full [OSPF], Enhanced Interior Gateway Routing

Protocol [EIGRP], and Intermediate System-to-Intermediate System Version 4 [IS-ISv4]) are supported for load balancing and for constructing scalable LANs. Ipv6 routing (using OSPFv3 and EIGRPv6) is supported in hardware for maximum performance.

Protocol-Independent Multicast (PIM) for IP multicast routing is supported, including PIM sparse mode (PIM SM), and Source-Specic Multicast (SSM).

IPv6 addressing is supported on interfaces with appropriate show commands for monitoring and troubleshooting.

Licensing

Introduction to Smart Licensing Cisco Smart Licensing is a exible licensing model that provides you with an easier, faster, and more consistent way to purchase and manage software across the Cisco portfolio and across your organization.

And it’s secure – you control what users can access. With Smart Licensing you get:

Easy Activation: Smart Licensing establishes a pool of software licenses that can be used across the entire organization—no more PAKs (Product Activation Keys).

Uni�ed Management: My Cisco Entitlements (MCE) provides a complete view into all of your Cisco products and services in an easy-to-use portal, so you always know what you have and what you are using.

License Flexibility: Your software is not node-locked to your hardware, so you can easily use, and transfer licenses as needed.

To use Smart Licensing, you must rst set up a Smart Account on Cisco Software Central

(software.cisco.com).

For a more detailed overview on Cisco Licensing, go to cisco.com/go/licensingguide

Packaging: Network and Cisco DNA licensing The Cisco Catalyst 9000 family of switches introduces a new and simplied licensing package in the form of base and add-on licenses.

The perpetual licensing package includes the Network Essentials and Network Advantage licensing options that are tied to the hardware. Between them, the base licensing packages cover switching http://software.cisco.com/ https://cisco.com/go/licensingguide fundamentals, management automation, troubleshooting, and advanced switching features. These

Network licenses are perpetual.

The subscription licensing package includes the Cisco DNA Essentials and Cisco DNA Advantage options. In addition to on-box capabilities, the features available with this package provide Cisco innovations on the switch, as well as on Cisco DNA Center. The Cisco DNA subscription licenses are mandatory at the time of conguration. With Cisco DNA software licenses, customers receive embedded SWSS – which covers 24x7x365 Cisco Technical Assistance Center (TAC) support, software release updates, advanced support analytics, and designated service management. This is valid only for the Cisco DNA software subscription stacks (Cisco DNA Essentials and Advantage).

Note: For full hardware support, including the perpetual network stack customers will require Smart Net

Total Care for 24x7x365 Cisco Technical Assistance Center (TAC) support, proactive security and product alerts, and product lifecycle management. An additional option for hardware support is Solution Support for your multivendor Cisco solution environment

License consumption is easily determined by the package itself. While perpetual licenses are always permanent and without an expiration date, subscription licenses have to be purchased for a 3-, 5-, or 7-year term (and hence are also known as term-based licenses).

Table 10 shows the combinations of perpetual and subscription licenses that must be purchased.

Supported licensing combinations Table 10. Licensing combinations

Licensing combinations Cisco DNA Advantage Cisco DNA Essentials

Network Essentials No Yes

Network Advantage Yes No*

* At the time of license renewal, the Cisco DNA Essentials license can be purchased to be used with Network Advantage.

Cisco DNA Software subscription Cisco DNA Software subscriptions oer a exible way to buy software for the access domain. At each stage in the product lifecycle, Cisco DNA Software subscriptions help make buying, managing, and upgrading your network and infrastructure software easier. Cisco DNA Software subscriptions provide:

Flexible licensing models to smoothly distribute customers’ software spending over time

Investment protection for software purchases through software services–enabled license portability

Lower cost of entry with the new Cisco DNA Software Subscription for Switching model

For ordering information for Cisco DNA Software for Cisco Catalyst 9200 Series switches, go to:

https://www.cisco.com/c/en/us/products/collateral/software/one-subscription-switching/nb-06-dna-sw-sub-access-sw-ctp-en.html.

Cisco Catalyst 9200 Series switches run on Cisco IOS XE Release 16.9.2 or later. This software release includes all the features listed earlier in the Platform Software Benets section.

Managing licenses with Smart Accounts Creating Smart Accounts by using the Cisco Smart Software Manager (Cisco SSM) enables you to order devices and licensing packages and also manage your software licenses from a centralized website. You can set up Cisco SSM to receive daily email alerts and to be notied of expiring add-on licenses that you want to renew.

You must order an add-on license in order to purchase a switch. When the license term expires, you can either renew the add-on license to continue using it or deactivate the add-on license and then reload the switch to continue operating with the base license capabilities.

Both the base and add-on licenses are also available for a 90-day evaluation period. An evaluation license is activated temporarily, without purchase. An expired evaluation license cannot be reactivated after reload.

Note: It is not required to deploy Cisco DNA Center, just to use one of the above packages.

Tables 11 shows the features included in the Network Essentials and Advantage packages.

Table 12 shows the features included in the Cisco DNA Essentials and Advantage packages.

Network licensing

Table 11. Network essentials and advantage package features https://www.cisco.com/c/en/us/products/collateral/software/one-subscription-switching/nb-06-dna-sw-sub-access-sw-ctp-en.html

Features on Cisco Catalyst uplink switches Network Essentials

Network Advantage

Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF -– 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO

Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF

Network segmentation

VRF, VXLAN, LISP, SGT

Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP

Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN

Security

MACsec-128 (MACsec-256 on C9200CX SKUs)

Cisco DNA licensing Table 12. Cisco DNA Essentials and Advantage Package Features

Features Cisco DNA Essentials

Cisco DNA Advantage

Advanced telemetry and visibility

Full Flexible NetFlow, EEM

Features Cisco DNA Essentials

Cisco DNA Advantage

Optimized telemetry and visibility

AVC (NBAR2)

Day-0 network bring-up automation

Cisco Network Plug-and-Play application, network settings, device credentials, LAN automation, host onboarding

Element management

Discovery, inventory, topology, software image, licensing, and conguration management

Element management

Patch management

Basic Assurance

Health dashboards – Network, Client, Application; switch and wired client health monitoring

SD-Access

Policy-based automation and assurance for wired and wireless

Network assurance and analytics

Global insights, trends, compliance, custom reports; switch 360, wired client 360; fabric and non-fabric insights; app health, app 360, app performance (loss, latency, jitter)

Cloud monitoring for Catalyst ✓* ✓

*Limited device visibility, not currently supported on C9200CX

For a full list of features, please see the switching feature matrix:

https://www.cisco.com/c/m/en_us/products/software/dna-subscription-switching/en-sw-sub-matrix-switching.html?OID=otren019471.

Product sustainability Refer to the CSR/Social Responsibility section for more information on Cisco’s environmental sustainability policies and initiatives.

https://www.cisco.com/c/m/en_us/products/software/dna-subscription-switching/en-sw-sub-matrix-switching.html?OID=otren019471

Sustainability Topic Reference

General Information on product-material-content laws and regulations

Materials

Information on electronic waste laws and regulations, including our products, batteries, and packaging

WEEE Compliance

Sustainability Inquiries Contact: csr_inquiries@cisco.com

Safety and compliance Safety and compliance information

Information on product takeback and reuse program

Cisco Takeback and Reuse Program

Power IEEE 802.3at PoE+ Intelligent PoE+ Section

IEEE 802.3 class 8 PD C9200CX Section

PoE+ power availability PoE+ Power with Primary and secondary power supplies

Fan Fan Section

Power connectors Connectors

Power supply specications Power supply specications

Power consumption (ATIS) Power consumption of standalone Catalyst 9200 Series switches https://www.cisco.com/c/en/us/about/product-innovation-stewardship/materials.html https://www.cisco.com/c/en/us/about/product-innovation-stewardship/product-recycling/weee-compliance.html mailto:csr_inquiries@cisco.com https://www.cisco.com/c/en/us/about/takeback-and-reuse.html

Sustainability Topic Reference

Material Product packaging weight and materials

Contact: environment@cisco.com

Chassis Dimension, weight, MTBF Model dimensions, weight, and mean time between failure metrics

Elimination of wet paint on plastic bezel

2019 Cisco Corporate Social Responsibility

Report, Pg. 19 Stepping up our work on circularity

Speci�cations

Dimensions, Eight, Acoustic, Mean time between failures Table 13-16 show the dimensions, weights, acoustic, and mean time between failures of all models of Cisco

Catalyst 9200 Series switches.

Table 13. Model Dimensions mailto:environment@cisco.com https://www.cisco.com/c/dam/m/en_us/about/csr/csr-report/2019/_pdf/csr-report-2019.pdf

Platform Physical Speci�cations

Chassis Dimensions Chassis + FEP + Fan Dimensions (HxWxD)

Model Inches Centimeters Inches Centimeters

C9200-24T 1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200-24P 1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200-24PB 1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200-24PXG 1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200-48T 1.73 x 17.5 x 13.8

4.4 x 44.5 x 35.0

1.73 x 17.5 x 15.4

4.4 x 44.5 x 39.1

C9200-48P 1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200-48PL 1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200-48PB 1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200-48PXG 1.73 x 17.5 x 4.4 x 44.5 x 1.73 x 17.5 x 4.4 x 44.5 x

Chassis + FEP + Fan Dimensions (HxWxD)

Model Inches Centimeters Inches Centimeters

13.8 35.0 15.4 39.1

C9200L-24T-4G 1.73 x 17.5 x

11.3

4.4 x 44.5 x

28.8

1.73 x 17.5 x

12.9

4.4 x 44.5 x

32.9

C9200L-24P-4G 1.73 x 17.5 x

11.3

4.4 x 44.5 x

28.8

1.73 x 17.5 x

12.9

4.4 x 44.5 x

32.9

C9200L-48T-4G 1.73 x 17.5 x 11.3

4.4 x 44.5 x 28.8

1.73 x 17.5 x 12.9

4.4 x 44.5 x 32.9

C9200L-48P-4G 1.73 x 17.5 x

11.3

4.4 x 44.5 x

28.8

1.73 x 17.5 x

12.9

4.4 x 44.5 x

32.9

C9200L-48PL-4G 1.73 x 17.5 x

11.3

4.4 x 44.5 x

28.8

1.73 x 17.5 x

12.9

4.4 x 44.5 x

32.9

C9200L-24T-4X 1.73 x 17.5 x

11.3

4.4 x 44.5 x

28.8

1.73 x 17.5 x

12.9

4.4 x 44.5 x

32.9

C9200L-24P-4X 1.73 x 17.5 x

11.3

4.4 x 44.5 x

28.8

1.73 x 17.5 x

12.9

4.4 x 44.5 x

32.9

C9200L-48T-4X 1.73 x 17.5 x 11.3

4.4 x 44.5 x 28.8

1.73 x 17.5 x 12.9

4.4 x 44.5 x 32.9

Chassis + FEP + Fan Dimensions (HxWxD)

Model Inches Centimeters Inches Centimeters

C9200L-48P-4X 1.73 x 17.5 x 11.3

4.4 x 44.5 x 28.8

1.73 x 17.5 x 12.9

4.4 x 44.5 x 32.9

C9200L-48PL-4X 1.73 x 17.5 x

11.3

4.4 x 44.5 x

28.8

1.73 x 17.5 x

12.9

4.4 x 44.5 x

32.9

C9200L-24PXG-

4X

1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200L-24PXG-

2Y

1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200L-48PXG-

4X

1.73 x 17.5 x

13.8

4.4 x 44.5 x

35.0

1.73 x 17.5 x

15.4

4.4 x 44.5 x

39.1

C9200L-48PXG-

2Y

1.73 x 17.5 x 13.8

4.4 x 44.5 x 35.0

1.73 x 17.5 x 15.4

4.4 x 44.5 x 39.1

C9200CX-12T-

2X2G

1.73 x 10.6 x

6.5

4.4 x 26.9 x

16.5

1.73 x 10.6 x

6.5

4.4 x 26.9 x

16.5

C9200CX-12P-

2X2G

1.73 x 10.6 x

9.6

4.4 x 26.9 x

24.4

1.73 x 10.6 x

9.6

4.4 x 26.9 x

24.4

C9200CX-8P- 1.73 x 10.6 x 4.4 x 26.9 x 1.73 x 10.6 x 4.4 x 26.9 x

Chassis + FEP + Fan Dimensions (HxWxD)

Model Inches Centimeters Inches Centimeters

2X2G 9.6 24.4 9.6 24.4

Table 14. Model Weights

Model Pounds Kilograms

C9200-24T 11.02 5.0

C9200-24P 12.12 5.5

C9200-24PB 12.12 5.0

C9200-24PXG 11.33 5.1

C9200-48T 11.02 5.0

C9200-48P 12.12 5.5

C9200-48PL 12.12 5.5

C9200-48PB 12.12 5.5

C9200-48PXG 11.98 5.45

C9200L-24T-4G 9.59 4.35

Model Pounds Kilograms

C9200L-24P-4G 10.38 4.71

C9200L-48T-4G 9.97 4.53

C9200L-48P-4G 10.58 4.80

C9200L-48PL-4G 10.58 4.80

C9200L-24T-4X 9.59 4.35

C9200L-24P-4X 10.38 4.71

C9200L-48T-4X 9.97 4.53

C9200L-48P-4X 10.58 4.80

C9200L-48PL-4X 10.58 4.80

C9200L-24PXG-4X 12 5.44

C9200L-24PXG-2Y 12 5.44

C9200L-48PXG-4X 12.6 5.71

C9200L-48PXG-2Y 12.6 5.71

C9200CX-12T-2X2G 4.0 1.81

Model Pounds Kilograms

C9200CX-12P-2X2G 6.6 2.99

C9200CX-8P-2X2G 6.6 2.99

Table 15. Model Mean time between failures metrics

Mean time between failures (hours)

C9200-24T 587,800

C9200-24P 422,310

C9200-24PB 434,220

C9200-24PXG 353,960

C9200-48T 571,440

C9200-48P 375,570

C9200-48PL 375,570

C9200-48PB 384,980

C9200-48PXG 320,440

C9200L-24T-4G 531,030

C9200L-24P-4G 392,210

C9200L-48T-4G 508,700

C9200L-48P-4G 347,760

C9200L-48PL-4G 347,760

C9200L-24T-4X 525,990

C9200L-24P-4X 390,310

C9200L-48T-4X 503,400

C9200L-48P-4X 346,270

C9200L-48PL-4X 346,270

C9200L-24PXG-4X 379,410

C9200L-24PXG-2Y 374,730

C9200L-48PXG-4X 337,360

C9200L-48PXG-2Y 337,260

C9200CX-12T-2X2G 755,270

C9200CX-12P-2X2G 553,140

C9200CX-8P-2X2G 569,530

PWR-C5-125WAC 3,332,120

PWR-C5-600WAC 1,600,060

PWR-C5-1KWAC 1,600,060

PWR-C6-125WAC 3,332,120

PWR-C6-600WAC 1,600,060

PWR-C6-1KWAC 1,600,060

Table 16. Model Environmental Ranges

Environmental ranges

Acoustic noise

Measured per ISO 7779 and declared per ISO

Bystander positions operating to an ambient temperature of 25°C

With AC power supply (with 48 PoE+ ports loaded):

● LpA: 42dB typical, 45 dB max

● LwA: 5.3B typical, 5.6B max

With AC power supply (with 24 PoE+ ports loaded):

● LpA: 42dB typical, 45 dB max

● LwA: 5.3B typical, 5.6B max

Typical: Noise emission for a typical conguration

Maximum: Statistical maximum to account for variation in production

Connectors Table 17 shows the supported connectors for Cisco Catalyst 9200 Series switches.

Table 17. Connectors

Power

Connectors and cabling

● 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling

● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling

● 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC ber connectors (single- mode or multimode ber)

● 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP+ transceivers: LC ber connectors (single- mode or multimode ber)

● SFP+ connector

● Cisco StackWise-160/80 stacking ports: copper-based Cisco StackWise cabling

● Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling

● Management console port: RJ-45-to-DB9 cable for PC connections, USB-C adaptor, USB adaptor

Power connectors

● Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

For the latest Cisco transceiver module compatibility information, refer to https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/TMG

_CM_Tool_User_Manual.html.

Management and standards support Table 18 shows management and standards support for Cisco Catalyst 9200 Series switches.

Table 18. Management and standards support* https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/TMG_CM_Tool_User_Manual.html

Description Speci�cation

Management BRIDGE-MIB CISCO-NHRP-EXT-MIB

CISCO-BRIDGE-EXT-MIB CISCO-NTP-MIB

CISCO-BULK-FILE-MIB CISCO-PAGP-MIB

CISCO-CABLE-DIAG-MIB CISCO-PORT-SECURITY-

MIB

CISCO-CALLHOME-MIB CISCO-PORT-STORM-

CONTROL-MIB

CISCO-CEF-MIB CISCO-POWER-

ETHERNET-EXT-MIB

CISCO-CIRCUIT-INTERFACE-MIB CISCO-PRIVATE-VLAN-

MIB

CISCO-CONFIG-COPY-MIB CISCO-PROCESS-MIB

CISCO-CONFIG-MAN-MIB CISCO-PRODUCTS-MIB

CISCO-DEVICE-LOCATION-MIB CISCO-RF-MIB

CISCO-DHCP-SNOOPING-MIB CISCO-RTP-METRICS-

MIB

CISCO-EIGRP-MIB CISCO-RTTMON-ICMP-

MIB

CISCO-EMBEDDED-EVENT-MGR-MIB CISCO-STACKWISE-MIB

CISCO-ENTITY-FRU-CONTROL-MIB CISCO-STP-

EXTENSIONS-MIB

CISCO-ENTITY-SENSOR-MIB CISCO-SYSLOG-MIB

CISCO-ENTITY-VENDORTYPE-OID-MIB CISCO-TCP-MIB

CISCO-ERR-DISABLE-MIB CISCO-UDLDP-MIB

CISCO-FLASH-MIB CISCO-VLAN-IFTABLE-

RELATIONSHIP- MIB

CISCO-FLOW-MONITOR-MIB ENTITY-MIB

CISCO-FTP-CLIENT-MIB HC-ALARM-MIB

CISCO-HSRP-EXT-MIB HC-RMON-MIB

CISCO-HSRP-MIB IEEE8023-LAG-MIB

CISCO-IETF-BFD-MIB IF-MIB

CISCO-IETF-PPVPN-MPLS-VPN-MIB IP-FORWARD-MIB

CISCO-IETF-PW-MPLS-MIB IP-MIB

CISCO-IF-EXTENSION-MIB LLDP-EXT-MED-MIB

CISCO-IGMP-FILTER-MIB LLDP-MIB

CISCO-IMAGE-LICENSE-MGMT-MIB MAU-MIB

CISCO-IMAGE-MIB MPLS-L3VPN-STD-MIB

CISCO-IP-CBR-METRICS-MIB MPLS-LSR-STD-MIB

CISCO-IP-STAT-MIB MPLS-VPN-MIB

CISCO-IP-TAP-MIB OLD-CISCO-CHASSIS-

MIB

CISCO-IP-URPF-MIB OLD-CISCO-CPU-MIB

CISCO-IPSEC-FLOW-MONITOR-MIB OLD-CISCO-

INTERFACES-MIB

CISCO-IPSEC-MIB OLD-CISCO-IP-MIB

CISCO-IPSEC-PROVISIONING-MIB OLD-CISCO-MEMORY-

MIB

CISCO-IPSLA-AUTOMEASURE-MIB OLD-CISCO-SYS-MIB

CISCO-IPSLA-ECHO-MIB OLD-CISCO-TCP-MIB

CISCO-IPSLA-JITTER-MIB OLD-CISCO-TS-MIB

CISCO-L2-CONTROL-MIB POWER-ETHERNET-MIB

CISCO-L2L3-INTERFACE-CONFIG-MIB RFC1213-MIB

CISCO-LAG-MIB RMON-MIB

CISCO-LICENSE-MGMT-MIB RMON2-MIB

CISCO-LOCAL-AUTH-USER-MIB SMON-MIB

CISCO-MAC-NOTIFICATION-MIB SNMPv2-MIB

CISCO-MDI-METRICS-MIB SONET-MIB

CISCO-MEDIA-METRICS-MIB TCP-MIB

CISCO-MEMORY-POOL-MIB UDP-MIB

CISCO-MPLS-LSR-EXT-STD-MIB

CISCO-NBAR-PROTOCOL-DISCOVERY-MIB

Standards EEE 802.1s RMON I and II standards

IEEE 802.1w SNMPv1, v2c, and v3

IEEE 802.1x

IEEE 802.1x-Rev

IEEE 802.3ad

IEEE 802.3af

IEEE 802.3at

IEEE 802.3x full duplex on 10BASE-T, 100BASE-

TX, and 1000BASE-T ports

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1p CoS prioritization

IEEE 802.1Q VLAN

IEEE 802.3 10BASE-T specication

IEEE 802.3u 100BASE-TX specication

IEEE 802.3ab 1000BASE-T specication

IEEE 802.3z 1000BASE-X specication

IEEE 802.1AE - 128-bit AES MACsec inter network device encryption with MACsec Key Agreement

(MKA)

IEEE 802.3bz (for mGig PKG SKU’s only)

IEEE 802.3an (10GBase-T) (for mGig PKG SKU’s only)

Power supply speci�cations Table 19 lists the power specications for Cisco Catalyst 9200 Series switches based on the kind of power supply used.

Table 19. Power supply speci�cations

PWR-C5-

125WAC

PWR-C6-

125WAC

PWR-C5-

600WAC

PWR-C6-

600WAC

PWR-C5-

1KWAC

PWR

1KW

Power supply rated maximum

125W 125W 600W 600W 1000W 1000

Total output

BTU

(note: 1000 BTU/hr = 293W)

426.5

BTU/hr, 125W

426.5

BTU/hr, 125W

2047.3

BTU/hr, 600W

2047.3

BTU/hr, 600W

BTU/hr, 1000W

BTU/

Input-voltage range and

100 to 240 100 to 240 100 to 240 100 to 240 100 to 240 100 t

PWR-C6-

125WAC

PWR-C5-

600WAC

PWR-C6-

600WAC

PWR-C5-

1KWAC

PWR

1KW

frequency VAC, 50 to 60 Hz

VAC,

50 to 60 Hz

VAC,

50 to 60 Hz

VAC,

50 to 60 Hz

VAC,

50 to 60 Hz

VAC,

50 to

Input current 1.6-0.7A 1.6-0.7A 7-2.8A 7-2.8A 12-6A 12-6

Output ratings 12V at

10.5A

12V at

10.5A

54V at

11.1A

54V at

11.1A

54V at

16.5A

54V

16.5A

Output holdup time

20 ms minimum at

100 VAC

20 ms minimum at

100 VAC

20 ms minimum at

100 VAC

20 ms minimum at

100 VAC

20 ms minimum at

100 VAC

20 m minim

100 V

Power-supply input receptacles

IEC 320-

C14

(IEC60320-

C14)

IEC 320-

C14

(IEC60320-

C14)

IEC 320-

C16

(IEC60320-

C16)

IEC 320-

C16

(IEC60320-

C16)

IEC 320-

C16

(IEC60320-

C16)

IEC 3

C16

(IEC6

C16)

Power cord rating

10A 10A 15A 15A 15A 15A

Physical speci�cations

(H x W x

D):

1.58” x

4.0” x 7.6”

Weight: 1.5 lb (0.68 kg)

(H x W x

D):

1.58” x

4.0” x 7.6”

Weight: 1.5 lb (0.68 kg)

(H x W x

D):

1.58” x

4.0” x 7.6”

Weight: 1.7 lb (0.77 kg)

(H x W x

D):

1.58” x

4.0” x 7.6”

Weight: 1.7 lb (0.77 kg)

(H x W x

D):

1.58” x

4.0” x 7.6”

Weight: 2 lb (0.9 kg)

(H x

D):

1.58

4.0”

Weig lb (0

PWR-C6-

125WAC

PWR-C5-

600WAC

PWR-C6-

600WAC

PWR-C5-

1KWAC

PWR

1KW

Supported Product Family

C9200, C9200L

C9200 C9200, C9200L

C9200 C9200, C9200L

C920

Operating temperature

Normal operating temperature* and altitudes:

● -5°C to +45°C, up to 5000 feet (1500m)

● -5°C to +40°C, up to 10,000 feet (3000m) *Minimum ambient temperature for cold start is 32°F (0°C)

Short-term* exceptional conditions:

● -5°C to +50°C, up to 5000 feet (1500m)

● -5°C to +45°C, up to 10,000 feet (3000m)

● -5°C to +45°C, at sea level with single fan failure *Not more than following in one-year period: 96 consecutive hours, or 360 hours tota

Storage temperature

-40° to 158°F (-40° to 70°C)

Relative humidity operating and nonoperating noncondensing

5% to 90% noncondensing

Altitude 10,000 ft. (3000 meters), up to 45°C

EMC

compliance

FCC Part 15 (CFR 47) Class A

ICES-003 Class A

EN 55032 Class A

CISPR 32 Class A

AS/NZS 3548 Class A

BSMI Class A

PWR-C6-

125WAC

PWR-C5-

600WAC

PWR-C6-

600WAC

PWR-C5-

1KWAC

PWR

1KW

VCCI Class A

CISPR 35

EN 55035, EN300 386*, EN 61000-3-2, EN 61000-3-3

Safety compliance

UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE M

LED indicators “AC OK”: Input power to the power supply is OK

“PS OK”: Output power from the power supply is OK

* Use shielded cables for locations other than telecom centers

Power consumption of Standalone 9200 Series switches Table 20 shows the power consumption of standalone Cisco Catalyst 9200 Series switches based on

Alliance for Telecommunications Industry Solutions (ATIS) testing using Internet Mix (IMIX) distribution stream trac, with input voltage of 115VAC at 60 Hz and no PoE loading. The values given are the maximum possible power consumption numbers under the respective test scenarios.

Table 20. Power consumption of standalone Catalyst 9200 Series switches

Measured P(W)

Half port tra�c Full port tra�c

SKU FEP Uplink Input 0.01%/

EEE

10% 30% 50% 100%

0.01%/

EEE

10% 30% 50%

C9200-

24T

125W

(C5/C6)

C9200-

NM-

4X1G

115VAC 33.09 36.08 36.15 36.20 36.34 35.51 41.78 41.89 42.00

230VAC 33.15 35.95 36.00 36.06 36.19 35.36 41.50 41.62 41.74

C9200-

24T

125W C9200-

NM—

4X10G

115VAC 33.62 36.99 37.29 37.58 38.26 35.41 42.00 42.55 43.11

230VAC 33.70 36.85 37.13 37.41 38.10 35.40 41.75 42.30 42.85

C9200-

24P

600W

(C5/C6)

C9200-

NM-

4X1G

115VAC 43.57 47.37 47.42 47.47 47.68 46.82 53.79 53.91 54.02

230VAC 43.38 46.92 46.95 47.03 47.18 46.35 53.23 53.34 53.45

C9200-

24P 600W

(C5/C6)

C9200-

NM-

4X10G

115VAC 44.62 48.49 48.79 49.11 49.88 47.02 54.18 54.77 55.34

230VAC 44.32 48.06 48.37 48.66 49.40 46.41 53.38 53.99 54.51

C9200-

24PXG

600W

(C6)

C9200-

NM-

4X10G

115VAC 84.30 90.90 91.00 92.30 94.20 95.00 110.60 111.60 112.60

230VAC 84.10 90.50 91.10 91.60 92.90 94.30 108.80 109.90 111.00

C9200-

24PXG

600W

(C6)

C9200-

NM-

2X25G

115VAC 83.41 87.59 88.56 89.19 90.85 93.96 101.38 103.32 104.89

230VAC 81.90 86.97 87.68 88.38 90.03 92.21 99.79 101.14 102.45

C9200-

24PXG

600W

(C6)

C9200-

NM-

2X40G

115VAC 82.34 86.78 87.91 88.90 91.64 92.97…