IT Infrastructure Engineer Designer Advertisement May 2026.pdf

Department/Agency Alamance Community College

Project Name Technology Infrastructure Replacement Project

SCO # 28434

NCCCS # 2861

Design Services Engineering

Scope

The Project consists of two integrated work elements:

Campus Conduit Infrastructure: Design of a diverse underground conduit pathway system providing a minimum of 2 separate and independent connectivity paths to each building on the Carrington-Scott Campus at 1247 Jimmie Kerr Road, Graham, NC, linking all campus buildings to a central distribution point(s). Work includes, but is not limited to, directional boring, trenching, conduit installation, pull boxes, handholes, and restoration of all disturbed surfaces.

Fiber Optic Network: Design of a redundant 24-strand single-mode fiber optic (SMF) network operating over the newly installed conduit system, with all strands terminated, tested and connected to both of the College’s on-campus data centers (Located in T Bldg and Main Bldg). The network architecture shall provide fully redundant pathways to eliminate single points of failure. Other relevant project information is available on RFQ Project Brief

Contact Jay Mayer Telephone (336) 506-4136 jnmayer503@alamancecc.edu Total Project Budget $700,000 Source of Funds SCIF Publish Date May 14, 2026 Closing Date June 2, 2026 at 3:00 pm

Pre-proposal meeting & site visit

May 20, 2026 at 10:00 am (Main Building Auditorium – Room 301)

Submit THREE (3) copies of qualifications information package and SF-254 (see RFQ Project Brief for additional proposal submittal requirements)

USPS Mailing Address:

Alamance Community College PO Box 8000 Graham, NC 27253 Main-Building, Room M364 Attn: Jay Mayer mailto:jnmayer503@alamancecc.edu

Address for Fed Ex/UPS delivery:

Alamance Community College 1247 Jimmie Kerr Road Graham, NC 27253

Attn: Jay Mayer

SELECTING CRITERIA

In selecting designers, the selection committee should take into consideration qualification information including such factors as:

1. Specialized or appropriate expertise in the type of project.

2. Past performance on similar projects.

3. Adequate staff and proposed design or consultant team for the project.

4. Current workload and State projects awarded.

5. Proposed design approach for the project including design team and consultants.

6. Recent experience with project costs and schedules.

7. Construction administration capabilities.

8. Proximity to and familiarity with the area where the project is located.

9. Record of successfully completed projects without major legal or technical problems.

10. Other factors which may be appropriate for the project.

SUBMITTAL CRITERIA

Please submit THREE (3) copies of current SF 254 Form with the required letters of interest and THREE (3) copies of information package. In the interest of costs-savings to the designers, consistency of the submittals and more efficient use of time by the pre-selection committee, the submitted information package should not include any notebooks, binders, tab, clips, etc. The format should be 8-1/2" x 11" pages stapled in the upper left-hand corner. The package length should not exceed twenty (20) pages plus the SF 254 Form.