Invitation+for+Bid+-+Dome+Paving.docx

STATE OF NORTH DAKOTA

INVITATION FOR BID (IFB)

(February 2024)

PROCUREMENT OFFICER

The Procurement Officer is the point of contact for this IFB. Bidders shall direct all communications regarding this IFB to the Procurement Officer. Please do not add the Procurement Officer to any marketing distribution lists.

PURCHASING AGENCY (STATE): Minot State University PROCUREMENT OFFICER: Sheila Latham EMAIL: sheila.latham@minotstateu.edu

PHONE: 701-858-4145

Engaging in unauthorized communication or seeking to obtain information about an open solicitation with any state employee or official other than the responsible Procurement Officer or designee is sufficient grounds for suspension or debarment. [N.D.A.C. § 4-12-05-04(7)]

BID QUESTION DEADLINE

Bidders should carefully review the IFB including all attachments. Bidders may ask questions to obtain clarification and request additional information, or object to material in the IFB. Questions and objections must be submitted to the Procurement Officer in writing by the deadline identified in the IFB. If no deadline is specified, questions or objections must be received at least seven days prior to the Bid Response deadline. The Procurement Officer may elect to respond to questions received after the deadline.

Email is the preferred method of submission with the IFB number and title cited in the email subject line. Responses to questions will be distributed as a solicitation amendment unless the question can be answered by referring the bidder to a specific section of the IFB.

A person or firm interested in submitting a proposal should ensure all communications related to the procurement are only with the designated point of contact. This section does not restrict communication with state officials or any member of the legislative assembly unless the state official or member of the legislative assembly is involved directly with the procurement for which the person is interested or has submitted a bid or proposal (N.D.C.C. § 54-44.4-01.1).

STATE PROCUREMENT WEBSITE (SPO ONLINE)

This solicitation has not been posted to the State Procurement website. The Procurement Officer will contact all bidders solicited regarding any amendments to this solicitation and award notices.

This IFB and any related amendments and notices will be posted on the North Dakota OMB website using the State Procurement Online system (SPO Online). Bidders are responsible for checking this website to obtain all information and documents related to this IFB: https://apps.nd.gov/csd/spo/services/bidder/main.htm

Select Recent Solicitations and find this solicitation. Recent solicitations are listed by close date.

Bidders not having completed the Bidders List registration may request to receive notices related to this IFB by contacting the Procurement Officer in writing with the following information: IFB title, business name, contact person, mailing address, telephone number, and email address.

SECTION 1

BIDDERS INSTRUCTIONS

1. Bidder Checklist. Have you remembered to?

· Ensure your Bid Response complies with all instructions, terms and conditions, delivery requirements, and specifications.

· Prepare your price in the specified unit of measure, FOB: Destination to the shipping location.

· Sign your bid, and initial any changes or corrections

· Ensure your Bid Response is received by the Procurement Officer by the Bid Response deadline. Called to confirm receipt.

· If using a delivery service, check tracking to ensure the Bid Response will be delivered on time. Contact the Procurement Officer as soon as possible in the event of delays due to weather, etc.

· Submit any required samples or documents.

2. Definitions.

· Bidder: any person or firm submitting a competitive bid in response to a solicitation.

· Bid Response: the executed document submitted by a Bidder in response to a solicitation.

· Commodities: all property, including equipment, supplies, materials, printing, insurance, and the lease of equipment.

· Contractor: any person or firm having a contract with a governmental body.

· Procurement Officer: an individual duly authorized to enter into and administer purchasing contracts and make written determinations with respect thereto; also includes an authorized representative acting with the limits of designated purchasing authority.

· Purchasing Agency (STATE): the entity on which the purchase is being made on behalf of.

· Services: the furnishing of labor, time, or effort by a Contractor, not involving the delivery of a specific end product other than reports that are merely incidental to the required performance.

· Solicitation: a document to notify prospective Bidders of a bidding opportunity.

· N.D.A.C.: North Dakota Administrative Code; rules with the force and effect of law.

· N.D.C.C.: North Dakota Century Code; state laws.

· OMB: Office of Management and Budget (OMB); a North Dakota state agency.

· SPO: State Procurement Office, a division of the Office of Management and Budget.

· SPO Online: a procurement information website maintained by the State Procurement Office pursuant to N.D.C.C. § 54-44.4-14.

3. Secretary of State Registration Requirements. The North Dakota Secretary of State has registration requirements for individuals and businesses transacting business in North Dakota. If the successful Offeror is determined to have a registration requirement with the North Dakota Secretary of State, they must be registered before the contract award and registration must remain active for the duration of the contract period (N.D.C.C. § 54-44.4-09.1)

See the OMB Guidelines to Vendor Registry for more information.

Visit the Secretary of State's Vendor Registration webpage for information on registration requirements and fees. Visit FirstStop, the Secretary of State's business and licensing software, for online form options.

· Check the Business Records database to see if a business is registered.

· Contact Secretary of State's office by email or call 701-328-2900 (choose menu item 2, then option 1).

· If you need to register, fees apply.

· Vendors may need to obtain businesses licenses. See the list of licenses required of businesses in the State of North Dakota. The link includes information on who to contact, application fees, renewal dates, and the legal reference.

4. Bidders List. Individuals or business entities desiring to be notified of bidding opportunities may apply to be placed on the Bidders List (N.D.C.C. § 54-44.4-09) Bidders Lists are used to notify vendors when solicitations are issued on the State Procurement Office Online system (SPO Online). Placement on the Bidders List does not guarantee a vendor will receive notice of every solicitation (N.D.A.C. § 4-12-05-01). There are no fees to register as a bidder. The online application form requests contact information for the receipt of solicitation notices. The Bidders List application and SPO Online system use commodity codes to identify categories of goods, services, and information technology.

The commodity codes used for this solicitation are: 745-01,14,21,65,67,68,84,87; 750-51,56, 913-75,94.

Visit the OMB website for instructions and the online Bidders List Application:

Bidders List Registration Website

For assistance with Bidders List Registration, contact State Procurement Help Desk at 701-328-1728 or infospo@nd.gov.

5. Submission Instructions. Please follow these instructions to submit your Bid Response. Bid Responses must be received by the Procurement Officer by the Bid Response deadline. Bidders assume the risk of the delivery method selected. Late Bid Responses will be rejected.

Sealed bids are required; therefore, bids cannot be submitted by email to the Procurement Officer.

Upload Response Through the State Procurement Online System (SPO Online):

Bidders must electronically submit Bid Responses through the State Procurement Office Online system (SPO Online) by the Bid Response deadline.

DO NOT WAIT UNTIL THE “LAST MINUTE” TO SUBMIT A RESPONSE. Recommend uploading response 24 hours prior to the Bid Response deadline.

Bidder must begin the electronic submission process well in advance of the Bid Response deadline to allow for transmission and resolution of any technical difficulties. Be advised that the STATE is not responsible for a Bidder’s failure to timely submit a Bid Response due to any technical difficulties. If you experience any technical difficulties contact the Procurement Officer or the State Procurement Office at infospo@nd.gov or 701.328.2740.

If documents are in the process of being uploaded when the Bid Response deadline occurs, the upload process will stop. The attempted submission will not be uploaded successfully and is ineligible for consideration. The STATE takes no responsibility for electronic submissions that are captured, blocked, filtered, quarantined, or otherwise prevented from uploading by any anti-virus or other security software.

1. This solicitation is posted on SPO Online at: https://apps.nd.gov/csd/spo/services/bidder/main.htm

2. Select “Recent Solicitations” and find this solicitation. Solicitations are listed by close date.

3. Use “Upload Response” to upload a maximum of five (5), clearly labeled documents before the Bid Response deadline.

4. Offerors must upload their Bid Response as requested in the Bid Response section of this IFB.

5. The maximum file size allowed is 50 MB per file.

6. There is a 50 character file name limitation for the document being uploaded.

7. There is 75 character limit in the TITLE field within SPO Online.

8. All SPO Online field entries must be alphanumeric. Dashes and underscores are allowed; however, the system does not accept other special characters such as apostrophe, & symbol, quotation marks, etc.

9. DO NOT submit documents that are embedded (zip files), movies, wmp, encrypted, or mp3 files.

10.Bidder will receive an email confirmation from infospo@nd.gov that the upload response was received including the “File Description” for the uploaded files. Review this email to ensure all files were successfully uploaded. If Bidder do not receive an email confirmation, the upload was not successful, and you will need to upload the files again. If Bidder does not receive an email confirmation after the reattempt, contact the Procurement Officer or the State Procurement Office at infospo@nd.gov or 701.328.2740.

Visit https://www.omb.nd.gov/sites/www/files/documents/doing-business-with-the-state/procurement/spo-electronic-response-external-job-aid.pdf for the SPO Electronic Response Job Aid which describes how to submit an electronic response.

6. Additional Terms and Conditions. Additional terms and conditions submitted with a Bid Response are of no effect unless accepted in writing by the Procurement Officer. Bid Responses with additional terms and conditions may be rejected as non-responsive. (N.D.A.C. § 4-12-11-06).

7. Assistance to Bidders with a Disability. Bidders with a disability that need an accommodation must contact the Procurement Officer prior to Bid Response deadline so reasonable accommodation can be made.

8. Bid Response Held Firm. Bid Responses are not awarded at the bid opening. Bidders must hold their Bid Responses firm for 30 days, unless otherwise specified by the Procurement Officer in writing.

9. Bid Response Opening. A public Bid Response opening will be held. The Procurement Officer will hold the Bid Response opening will be held:

Onsite

· Date: May 30, 2025

· Time: 1:00 PM, C.T.

· Location: Minot State University

10. Bid Response Results. Interested parties may contact the Procurement Officer to obtain a summary of all Bid Responses received and the award. Bid Response results may be posted on SPO Online: https://apps.nd.gov/csd/spo/services/bidder/main.htm

11. Bidders List - Suspension and Debarment. Placement on the Bidders List does not guarantee a vendor will receive notice of every solicitation. A vendor may be removed from the Bidders List if a solicitation notice is undeliverable. Vendors may be suspended or debarred from the Bidders List for cause. (N.D.A.C. ch. 4-12-05)

12. Changes/Corrections. Bidders must initial any changes or corrections to the Bid Response, such as erasures and crossed out/rewritten prices. The Procurement Officer may confirm the Bid Response when changes are not initialed.

13. Multiple Bid Responses. Bidders may submit more than one Bid Response in response to this solicitation. Each Bid Response submitted must be prepared in accordance with the Bid Response instructions and meet the stated requirements.

14. Open Records Requests. Bid Responses are exempt records until the date and time of the Bid Response opening. After the Bid Response opening, all Bid Responses are subject to North Dakota open records laws. Interested parties may contact the Procurement Officer to request information related to this solicitation.

15. Packaging. All packaging must be strong and secure in accordance with accepted commercial practices.

16. Protests. Protests of the solicitation must be received by the Procurement Officer within seven days before the Bid Response deadline. Protests of the award or Notice of Intent to Award must be received by the Procurement Officer within seven days after receiving notice of award. Seven calendar days after award or issuance of the Notice of Intent to Award it will be assumed that all interested parties knew or should have known all the facts surrounding the award. Protests must be made in writing to the Procurement Officer and include the basis for the protest. (N.D.C.C. § 54-44.4-12; N.D.A.C. ch. 4-12-14.)

17. Signature. The Bidder’s authorized representative must provide their printed name, title, and sign the Bid Response. The lack of a signature may be waived as a minor informality, provided a signed Bid Response is submitted by the deadline established by the Procurement Officer. (N.D.A.C. ch. 4-12-10)

18. Specifications, Compliance. All Bid Responses must comply with the stated specifications, and the successful Bidder will be held responsible. Bidders who desire to submit commodities or services that deviate from these specifications or have any objections to the stated specifications must contact the Procurement Officer by the deadline for questions or at least seven days before the Bid Response deadline, so the Procurement Officer can determine whether the specifications need to be amended.

19. Specifications Prepared by Non-State Personnel. When a purchasing agency has specifications prepared by someone other than a state employee or official on behalf of the state, that person or business entity must be excluded from submitting bids or proposals in accordance with N.D.A.C. § 4-12-06-06.

20. Supplier Registration (Payee). The successful Bidder will be required to complete Supplier Registration, if not already registered as a Supplier. Any individual or business who will be receiving payment from a state agency or higher education institution must complete a registration process to collect important financial and taxpayer information. Payments are generally made by check or automatic clearing house (ACH), and taxpayer information must be collected in compliance with IRS requirements. The State and North Dakota University System (NDUS) have separate financial systems and vendor registration processes.

21. Withdrawal or changes to a Bid Response prior to the Bid Response deadline. Before the Bid Response deadline, the Bidder’s authorized representative may withdraw or change a Bid Response by making a written request to the Procurement Officer.

22. Withdrawals or changes to a Bid Response after the Bid Response deadline. After the Bid Response deadline, no changes may be made to Bid Response, except as provided in N.D.A.C. ch. 4-12-10. The Bidder’s authorized representative may make a written request to withdraw the Bid Response.

SECTION 2

EVALUATION AND AWARD

1. Award. Award will be made to the responsible Bidder with the lowest priced Bid Response that is responsive to the specifications and all other requirements stated herein. Award will be made as follows:

· All or none.

2. Award – Printing Preference Laws. If practicable, all state, county, and other political subdivision public printing, binding, and blank book manufacturing, blanks, and printed stationery must be awarded to a resident North Dakota Bidder. (N.D.C.C. § 46-02-15, N.D.C.C. § 44-08-02, N.D.A.C. § 4-12-16-01)

· Bid Responses from nonresident (out-of-state) Bidders will be accepted. See Guidelines to North Dakota Purchasing Preference Laws.

3. Award – Preference Laws. The reciprocal preference law, N.D.C.C.§ 44-08-01, was repealed effective August 1, 2023.

4. Award – Tie Bid Response Preference. If a tie occurs between two or more Bidders with equal Bid Response prices or offerors with identical evaluation scores:

a. Preference must be given to a resident North Dakota bidder, seller, vendor, offeror, or contractor as defined in N.D.C.C. § 44-08-02. (N.D.C.C. 54-44.4-05.1)

b. If a tie still remains, award shall be made in accordance with N.D.A.C. § 4-12-11-05.

5. Late Bid Responses. Bid Response responses must be received by the Procurement Officer by the Bid Response deadline. Late Bid Responses will be rejected, regardless of the degree of lateness, unless the delay is due to the error of the Procurement Officer and discovered before the selection of the successful Bidder. (N.D.A.C. § 4-12-08-13)

6. Responsiveness of the Bid Response. Any Bid Response that does not meet the requirements of the solicitation, other than mistakes determined to be minor informalities, will be rejected. (N.D.A.C. § 4-12-11-03)

7. Minor Informalities. The STATE reserves the right to waive minor informalities in Bid Responses. Minor informalities are insignificant omissions or nonjudgmental mistakes that are matters of form rather than substance, evident from the Bid Response document, with a negligible effect on price, quantity, quality, delivery, or contractual conditions that can be waived or corrected without prejudice to other Bidders. (N.D.A.C. ch. 4-12-10)

8. Mistakes. The Procurement Officer may confirm the Bid Response in the event of apparent errors, such as an unreasonably priced Bid Response. Mistakes will be handled in accordance with N.D.A.C. ch. 4-12-10.

9. Responsibility of the Bidder. The Procurement Officer, at any time, may make a supplementary investigation as to the responsibility of any Bidder, even though the Bidder may be on the Bidders List. If a Bidder is determined to be not responsible, that Bid Response will be rejected even if it is the lowest Bid Response, and the Bidder may be debarred or suspended from the Bidders List. (N.D.A.C. § 4-12-11-04)

10. Rejection. The STATE reserves the right to reject any and all Bid Responses in whole or in part. The Procurement Officer will send a rejection notice, including the reason for rejection. Bid Responses will be rejected if:

a. the Bid Response is determined to be not responsive to the instructions, specifications, and other requirements of the solicitation, other than mistakes or omissions determined to be minor informalities;

b. the Bid Response is determined to be late;

c. the Bidder fails to comply with Bidders List Application requirements by the stated deadline;

d. the Bidder is determined to be not responsible, in accordance with N.D.A.C. § 4-12-11-04;

e. the Bid Response is not legible.

If all Bid Responses are rejected, the Procurement Officer will send written notice to Bidders, including the reason all Bid Responses were rejected. (N.D.A.C. § 4-12-11-09)

SECTION 3

SPECIAL TERMS AND CONDITIONS

1. State Contract. The contract resulting from this solicitation will be a State Contract made available to North Dakota state agencies and institutions.

2. Term of the Contract. The term of the contract issued as a result of this solicitation will be as follows:

a. Contract Period. This Contract term (Term) begins on June 2, 2025, or its Effective Date, and ends on August 22, 2025.

b. No Automatic Renewal. This Contract will not automatically renew.

3. Billing Address. After delivery of commodities or services under contract, the CONTRACTOR must submit a correct invoice. Payment will be made after inspection and acceptance.

· Invoices must be addressed to the Purchasing Agency. All invoice and payment inquiries must be directed to the Purchasing Agency.

4. Contract Amendment – Unanticipated Amendment. After a binding contract has been entered into, no changes may be made, unless prior written approval has been obtained from the Purchasing Agency through execution of a contract amendment. The Contractor may request changes, such as substitutions of a product, by submitting a written request to the Procurement Officer. Unanticipated amendments must be within the scope of the original contract, authorized by the terms of the contract and due to legitimate, unforeseen circumstances. (N.D.A.C. ch. 4-12-13)

5. Contract Estimated Volume. The volume of this contract is estimated. Estimates are not to be considered as either a minimum or maximum, but rather an estimate based upon past and anticipated usage. The CONTRACTOR or CONTRACTORs will be required to furnish actual requirements upon receipt of an order. This contract will not include items of a similar nature, which must be bought for emergency use.

6. Delivery Time Required. The CONTRACTOR must meet the specified delivery requirements. If delivery cannot be made within the specified time, the CONTRACTOR must notify the Ordering Agency in writing of the delay and the approximate date delivery may be expected.

· Delivery is required by the date indicated in the Specifications of this solicitation.

7. Descriptive Literature. The Bid Response must include descriptive literature or detailed manufacturer specifications for the offered equipment or commodities. Bidders are instructed to clearly mark the literature that demonstrates compliance with the specifications. Indicate whether optional features are included to meet the specifications.

8. Inspection and Acceptance or Rejection. The STATE reserves the right to conduct inspections and investigations related to the Bidder and the offered commodities or services, including but not limited to the firm, personnel, qualifications, and the commodities and services offered to make determinations regarding compliance with the Bid Response requirements and responsibility of the Bidder. All material and workmanship are subject to inspection and testing by the STATE at the point of manufacturer, place of storage, or upon receipt. The STATE reserves the right to reject any commodities or services and terminate the contract if the CONTRACTOR fails to comply with the specifications, terms and conditions, or the seller’s express or implied warranties. Rejected commodities will be removed at the CONTRACTOR’s expense. Failure to satisfactorily perform may result in suspension or debarment from the Bidders List.

If commodities or services are rejected as being not compliant with the requirements of this solicitation, the STATE will inform the CONTRACTOR in writing. The Purchasing Agency may provide the CONTRACTOR with a reasonable opportunity to cure, whenever practicable, as set forth in writing by the Purchasing Agency.

9. Invoicing.

All invoices and payment inquiries must be directed to the Purchasing Agency.

10. Pricing – Tax Exempt. All prices must be in United States currency. Bid Response prices must include all discounts and deductions, and to be less federal and state taxes. Bidders may contact the Procurement Officer to obtain the Purchasing Agency’s tax exemption number and tax-exempt certificate.

11. Price Adjustment. Pricing during the term of the contract will be as follows:

· Firm-Fixed. Pricing shall be firm for the period of the contract.

12. Pricing, Unit of Measure. The unit prices is to be according to the unit of measurement specified in the solicitation. In the event of mathematical differences between the unit price and extended total, the unit price will prevail. (N.D.A.C. § 4-12-10-02)

13. Background Checks for CONTRACTOR Personnel. The Purchasing Agency requires all background checks to be performed on all CONTRACTOR Personnel who will access the facility.

CONTRACTOR shall provide the Procurement Officer with the names of all individuals that will have access to the premises along with background checks for each individual for approval by the Purchasing Agency. This information must be received prior to the CONTRACTOR Personnel attempting to access the facility, and the CONTRACTOR must receive confirmation of approval. CONTRACTOR will be responsible for notifying the Procurement Officer or designee if any CONTRACTOR Personnel changes and provide background checks for any new CONTRACTOR Personnel. Under no circumstance shall any CONTRACTOR Personnel have access to the facility without a background check and approval by the Purchasing Agency. All background check and supporting documentation shall be provided through the North Dakota Bureau of Criminal Investigation. The cost of the background checks will be the CONTRACTOR’s responsibility. At any time during the contract period, the Purchasing Agency may request the CONTRACTOR to provide updated background checks of any CONTRACTOR Personnel that have access to the premises.

14. Time is of the Essence.

CONTRACTOR hereby acknowledges that time is of the essence for performance under this Contract unless otherwise agreed to in writing by the parties.

SECTION 4

RISK MANAGEMENT REQUIREMENTS

Bidders are instructed to review the following provisions. Objections to these provisions must be made in writing to the Procurement Officer by the deadline for questions.

1) Indemnification. Indemnification provisions are incorporated and made part of this solicitation and resultant contract.

· Contractor agrees to defend, indemnify, and hold harmless the state of North Dakota, its agencies, officers, and employees (State), from claims resulting from the performance of the contractor or its agent, including all costs, expenses and attorneys' fees, which may in any manner result from or arise out of this agreement, except claims based upon the State’s sole negligence or intentional misconduct. The legal defense provided by Contractor to the State under this provision must be free of any conflicts of interest, even if retention of separate legal counsel for the State is necessary. Any attorney appointed to represent the State must first qualify as and be appointed by the North Dakota Attorney General as a Special Assistant Attorney General as required under N.D.C.C. § 54-12-08. Contractor also agrees to reimburse the State for all costs, expenses and attorneys' fees incurred in establishing and litigating the indemnification coverage provided herein. This obligation shall continue after the termination of this agreement.

2) Insurance. Insurance provisions are incorporated and made part of this solicitation and resultant contract. Bidders are instructed to review the Insurance Requirements. The Successful Bidder will be required to provide the required proof of insurance prior to contract award, and failure to provide evidence of insurance coverage is a material breach and grounds for award rescission. Failure of the CONTRACTOR to keep the required insurance in effect during the term of the contract is grounds for termination of the contract.

CONTRACTOR shall provide certificate of insurance and any endorsements to STATE electronically to:

Name: Sheila Latham Email Address: sheila.latham@minotstateu.edu Email Subject Line: Certificate of Insurance – MSU-25-003

· Contractor shall secure and keep in force during the term of this agreement and Contractor shall require all subcontractors, prior to commencement of an agreement between Contractor and the subcontractor, to secure and keep in force during the term of this agreement, from insurance companies, government self-insurance pools or government self-retention funds, authorized to do business in North Dakota, the following insurance coverages:

1) Commercial general liability, including premises or operations, contractual, and products or completed operations coverages (if applicable), with minimum liability limits of $2,000,000 per occurrence.

2) Automobile liability, including Owned (if any), Hired, and Non-Owned automobiles, with minimum liability limits of $500,000 per person and $2,000,000 per occurrence.

3) Workers’ compensation coverage meeting all statutory requirements. The policy shall provide coverage for all states of operation that apply to the performance of this contract.

4) Employer’s liability or “stop gap” insurance of not less than $2,000,000 as an endorsement on the workers compensation or commercial general liability insurance.

5) Professional errors and omissions with minimum limits of $1,000,000 per claim and in the aggregate, Contractor shall continuously maintain such coverage during the contact period and for three years thereafter. In the event of a change or cancellation of coverage, Contractor shall purchase an extended reporting period to meet the time periods required in this section.

The insurance coverages listed above must meet the following additional requirements:

1) Any deductible or self-insured retention amount or other similar obligation under the policies shall be the sole responsibility of the Contractor.

2) This insurance may be in policy or policies of insurance, primary and excess, including the so-called umbrella or catastrophe form and must be placed with insurers rated “A-” or better by A.M. Best Company, Inc., provided any excess policy follows form for coverage. Less than an “A-” rating must be approved by the State. The policies shall be in form and terms approved by the State.

3) The State will be defended, indemnified, and held harmless to the full extent of any coverage actually secured by the Contractor in excess of the minimum requirements set forth above. The duty to indemnify the State under this agreement shall not be limited by the insurance required in this agreement.

4) The state of North Dakota and its agencies, officers, and employees (State) shall be endorsed on the commercial general liability policy on a primary and noncontributory basis, including any excess policies (to the extent applicable), as additional insured. The State shall have all the benefits, rights, and coverages of an additional insured under these policies that shall not be limited to the minimum limits of insurance required by this agreement or by the contractual indemnity obligations of the Contractor.

5) The insurance required in this agreement, through a policy or endorsement, shall include:

a) a “Waiver of Subrogation” waiving any right to recovery the insurance company may have against the State.

b) a provision that Contractor’s insurance coverage shall be primary (i.e. pay first) as respects any insurance, self-insurance or self-retention maintained by the State and that any insurance, self-insurance or self-retention maintained by the State shall be in excess of the Contractor’s insurance and shall not contribute with it.

c) cross liability/severability of interest for all policies and endorsements.

d) The legal defense provided to the State under the policy and any endorsements must be free of any conflicts of interest, even if retention of separate legal counsel for the State is necessary.

e) The insolvency or bankruptcy of the insured Contractor shall not release the insurer from payment under the policy, even when such insolvency or bankruptcy prevents the insured Contractor from meeting the retention limit under the policy.

6) The Contractor shall furnish a certificate of insurance to the undersigned State representative prior to commencement of this agreement. All endorsements shall be provided as soon as practicable.

7) Failure to provide insurance as required in this agreement is a material breach of contract entitling the State to terminate this agreement immediately.

8) Contractor shall provide at least 30-day notice of any cancellation or material change to the policies or endorsements. Contractor shall provide on an ongoing basis, current certificates of insurance during the term of the contract. A renewal certificate will be provided 10 days prior to coverage expiration.

3) Contract Bond. The CONTRACTOR will be required to furnish a contract bond in the amount of five percent (%) of bid that will guarantee compliance with all terms of the solicitation and contract.

4) Safety Requirements: The CONTRACTOR shall keep informed of and comply with all federal, state, and local laws, regulations, and other legal requirements governing the safety, health, sanitation, and performance of the contract in general. In addition, the Contractor shall provide, inspect and maintain all safeguards, safety devices, protective equipment, safety programs and other needed actions the Contractor determines necessary to reasonably protect the life, health and property of the Contractor, subcontractors, the State, the public and each of the employees, officers, assigns and agents of the Contractor, subcontractors and the State, in connection with the performance of work resulting from or arising out of the contract. The Contractor shall submit to the State a copy of the written safety program to be used as guidelines and direction for the Contractor's and subcontractors' activities. This program must meet all federal, state and local laws, regulations and other legal requirements and include the following minimum provisions: (1) a worksite safety policy and mission statement; (2) assigned responsibilities among management, supervisors and employees; (3) a system for periodic self-inspections, including inspections of job sites, materials, work performance and equipment; (4) a thorough accident and injury reporting and investigation process; (5) a safety orientation program including first aid, medical attention, emergency facilities, fire protection and prevention, housekeeping, illumination, sanitation, personal protective equipment, and occupational noise exposure; and (6) a safety training program including safety "tool box" meetings and other systems for ongoing training and also including training for employees on the recognition, avoidance and prevention of unsafe conditions. It will be a condition of the contract and shall be made a condition of each subcontract entered into pursuant to that contract, that the State is assuming no liability relating to its receipt and review of the Contractor's safety plan or activities. Safety remains the responsibility of the Contractor. Furthermore, the right of the State to receive and review the safety plan or activities shall not give rise to a duty on the part of the State to exercise this right for the benefit of the Contractor or any other person or entity.

SECTION 5

BID RESPONSE FORM

SPECIFICATIONS

Delivery Address: Minot State University, Procurement Officer, 500 University Ave W, Minot, ND 58707

Completion Date: August 22, 2025

Billing Address: Same as Delivery Address

Base Bid – South-side of the North Dome Parking Lot (see map) Mill depth 4 inches for south-side of the north Dome parking lot with cement stabilization. The parking lot is 190 feet by 220 feet at two 2-inch lifts total of 4 inches and 12 inches of stabilization

Project Information:

Hot Mix Asphalt Pavement

PART 1 – GENERAL

1.01 Section Summary

A. Bituminous pavement, bituminous prime, and tack coat.

1.02 References

A. North Dakota Department of Transportation “Standard Specifications for Road and Bridge Construction” Current Edition, as revised.

1. Section 401 – Prime, Tack, or Fog Coat

2. Section 420 – Bituminous Seal Coat

3. Section 430 – Hot Mix Asphalt (HMA)

4. Section 816 – Aggregates

5. Section 818 – Bituminous Materials

6. Section 826 – Joint Materials B. North Dakota Department of Transportation “Field Sampling and Testing Manual”

1.03 Submittals

A. Contractor shall submit mix design to MiSU for approval prior to construction.

B. Contractor shall be responsible for all Quality Control (QC) on the Project, including determining the specific gravity of the material for mix designs.

The Contractor shall conduct tests and submit results to the Engineer as described in the appropriate NDDOT Specification/Manual referenced above.

PART 2 – PRODUCTS

2.01 Hot Mix Asphalt Paving Materials

A. Bituminous Tack

1. CSS-1h or SS-1h emulsified asphalt.

B. Performance Graded (PG) Asphalt Cement

1. PG 58-28S asphalt cement shall be specified that meets AASHTO M 332.

C. Aggregate

1. The minimum aggregate designation for bituminous pavement mixes on MiSu shall be in compliance with NDDOT Specification Section 430 Superpave, FAA 43.

PART 3 – EXECUTION

3.01 General

A. Before paving operations may begin:

1. Aggregate base or existing surface to be overlaid must be approved by the MiSU.

2. Mix designs must be submitted and approved by MiSU

3.02 Hot Mix Asphalt Paving Operations

A. Paving operations shall conform to NDDOT Specification Section 430 except as modified herein:

1. HMA overlay must be placed within 14 days after the pavement surface has been stabilized. Each day pavement is not placed after 14 days of pavement milling, liquidated damages shall be charged at the amount of $3000 a day until paving has been completed. Any damage to the stabilized surface shall be corrected to the satisfaction MiSu at the Contractor’s expense.

2. All edges of existing pavement must be saw cut full depth or must be milled to provide a smooth transition for new pavement.

3. All concrete edges, including curb and gutter must be tacked prior to paving operations for all paving lifts.

4. Tack shall be applied between pavement layers at a rate of 0.10 Gal/SY. MiSU may adjust the quantity as low as 0.05 Gal/SY if necessary.

5. Testing and Acceptance

a. Shall conform to the NDDOT Specification

b. The Contractor shall be solely responsible for the quality control (QC) portions of the mixture and compaction.

c. Densities per sublot will be taken at random with a minimum of 1 nuclear density (ASTM D2950) per sublot, and the mean density in each sublot shall equal or exceed the specified density. A minimum of 10 percent of the sublots shall be cored. Core density testing may be substituted for nuclear density testing.

d. The density of the compacted bituminous pavement shall be determined in accordance with Section 1000 – Quality Requirements.

e. Each day’s haul will be considered a “lot” and each “lot” shall be divided into acceptance sublots not to exceed 1,500 square yards except as modified in Section 1000 – Quality Requirements.

f. Contract price adjustments shall be per Section 430.06C of the NDDOT Specification. If the average density of the pavement compared to the maximum theoretical density is ` below the minimum densities shown Table 430-10, then the pavement shall be removed and replaced at the Contractor’s expense.

6. All pavement surfaces shall be 1/4-inch above all curb edges, manholes, gate valves, and inlets. Areas found to be out of tolerance shall be corrected at the Contractor’s expense.

7. The finished surface shall not hold water. All water must drain into required drainage. Areas found to be out of tolerance shall be corrected at the Contractor’s expense.

Cement Stabilization:

1. Do not begin pulverization and stabilization until pre construction meeting at least 7 days before the proposed work start date.

2. Proposed site is provided.

3. Milling will not be allowed to bring the parking area to proposed grade after cement stabilization mixing and reclamation operations.

4. Contractor is responsible for finish grades and all quality control.

5. Quality control is the sole responsibility of the Contractor.

6. If additional base material is needed after cement stabilization operations, class 5 or a MiSU approved alternative is to be used after cement stabilization operations to bring the base to proposed drainage grade and will be at the contractors expense.

7. Remove non-uniform chunks and deleterious material encountered after pulverization and cement stabilization mixing.

8. Begin Micro Cracking between 48 hours and 72 hours of finishing the cement stabilized base.

9. Traffic and pedestrian control is the responsibility of the contractor.

Cure cement base for and additional 24 hours minimum after Micro Cracking before applying bituminous asphalt or additional aggregate while maintaining section within tolerance of optimum moisture. The contractor will need

10. to provide a proof roll with a full water truck prior to 7 full days of curing from final finishing to prove the base can withstand deformation for paving and heavy truck operations.

Cement Stabilization Reporting & Testing:

1. The contractor shall provide cement stabilization 12 inches deep at 6%.

2. Cement stabilization mix designs will be provided by the contractor to reach the required 6%

3. At the time of stabilization, the contractor will schedule moisture tests and instruct the independent agency to collect base samples for moisture density relationship. Also, at this time schedule the follow up compaction testing. All testing is at contractors cost.

4. The contractor will get the results of the moisture tests on site and provide them to the cement stabilization crew to make any adjustment needed to added water in the mixing process when compared to the cement stabilized mix design.

5. The contractor will schedule compaction testing per at a rate of 1 test per 600 sy area to occur immediately after compaction efforts.

BIDDER INFORMATION AND SIGNATURE

By submitting a Bid Response, the Bidder agrees to sell, furnish, and deliver to the STATE all commodities and services contained in this Invitation for Bid for which a contract is awarded by the STATE. The Bidder shall fully perform the contract in accordance with all the specifications, requirements, terms, and conditions, and shall comply with all applicable provisions of the North Dakota Century Code, including chapters 54-44.4, 46-02, and 44-08, and North Dakota Administrative Code Chapter 4-12, made part of the Invitation for Bid and resultant contract by reference.

Written acceptance of the Bid Response by the STATE constitutes a binding contract made and entered into by and between the State of North Dakota, acting through the Purchasing Agency, and the Bidder named below. Written acceptance may be made by execution of a contract, purchase order, or order using a state purchasing card.

NOTICE. All notices or other communications required under this Contract must be given by registered or certified mail and are complete on the date postmarked when addressed to the parties identified herein. Notice provided under this provision does not meet the notice requirements for monetary claims against the STATE found at N.D.C.C. § 3212.204.

Bidder/Contractor Name:

Contractor Federal Employer Identification Number (FEIN)

Bidder Street Address/ P.O. Box:

City, State ZIP:

Contact Name:

Contact Title:

Telephone Number:

Email:

Authorized Representative Signature:

Date:

STATE OF NORTH DAKOTA

BID ACCEPTANCE AND CONTRACT AWARD

The parties to this contract (Contract) are the state of North Dakota, acting through the Purchasing Agency (STATE), and the above-named Bidder (CONTRACTOR). This Contract is not effective until fully executed by both parties. If no start date is specified in the Term of Contract, the most recent date of signatures of the parties shall be deemed the Effective Date.

NOTICE. All notices or other communications required under this Contract must be given by registered or certified mail and are complete on the date postmarked when addressed to the parties identified herein. Notice provided under this provision does not meet the notice requirements for monetary claims against the STATE found at N.D.C.C. § 3212.204.

Acting through its Purchasing Agency:

Minot State University

BY: (Signature)

Printed Name:

Krista Lambrecht

Title:

Vice President for Administration and Finance

Date:

SECTION 6

CONTRACT TERMS AND CONDITIONS

1. Scope of Work. CONTRACTOR, in exchange for the compensation paid by STATE under this Contract, shall provide the commodities and services described in this solicitation.

2. Compensation.

Contractual Amount STATE shall pay for the accepted services provided by CONTRACTOR under this Contract an amount not to exceed the amount indicated on the Bid Response form (Contractual Amount). The Contractual Amount is firm for the duration of the Contract and constitutes the entire compensation due CONTRACTOR for performance of its obligations under this Contract, unless amended, regardless of the difficulty, materials or equipment required, including fees, licenses, overhead, profit and all other direct and indirect costs incurred by CONTRACTOR, except as provided by an amendment to this Contract.

Payment

1) Payment made in accordance with this Compensation section shall constitute payment in full for the services and work performed and the deliverables and work(s) provided under this Contract and CONTRACTOR shall not receive any additional compensation hereunder.

2) STATE shall make payment under this Contract within forty-five (45) calendar days after receipt of a correct invoice.

3) Payment of an invoice by STATE will not prejudice STATE’s right to object to or question that or any other invoice or matter in relation thereto. CONTRACTOR's invoice will be subject to reduction for amounts included in any invoice or payment made which are determined by STATE, on the basis of audits conducted in accordance with the terms of this Contract, not to constitute allowable costs. At STATE’s sole discretion, all payments shall be subject to reduction for amounts equal to prior overpayments to CONTRACTOR.

4) For any amounts that are or will become due and payable to STATE by CONTRACTOR, STATE reserves the right to deduct the amount owed from payments that are or will become due and payable to CONTRACTOR under this Contract.

3. Prepayment. STATE will not make any advance payments before performance by CONTRACTOR under this Contract.

4. Payment of Taxes by State. STATE is not responsible for and will not pay local, state, or federal taxes. STATE will furnish certificates of exemption upon request by the CONTRACTOR.

5. Termination.

a. Termination for Convenience or by Mutual Agreement This Contract may be terminated by STATE upon thirty (30) days’ written notice to CONTRACTOR. This Contract may be terminated by mutual consent of both parties executed in writing.

b. Early Termination in the Public Interest STATE is entering into this Contract for the purpose of carrying out the public policy of the State of North Dakota, as determined by its Governor, Legislative Assembly, Agencies and Courts. If this Contract ceases to further the public policy of the State of North Dakota, STATE, in its sole discretion, by written notice to CONTRACTOR, may terminate this Contract in whole or in part.

c. Termination for Lack of Funding or Authority STATE by written notice to CONTRACTOR, may terminate the whole or any part of this Contract under any of the following conditions:

1) If funding from federal, state, or other sources is not obtained and continued at levels sufficient to allow for purchase of the services or supplies in the indicated quantities or term.

2) If federal or state laws or rules are modified or interpreted in a way that the services are no longer allowable or appropriate for purchase under this Contract or are no longer eligible for the funding proposed for payments authorized by this Contract.

3) If any license, permit, or certificate required by law or rule, or by the terms of this Contract, is for any reason denied, revoked, suspended, or not renewed.

Termination of this Contract under this subsection is without prejudice to any obligations or liabilities of either party already accrued prior to termination.

d. Termination for Cause STATE may terminate this Contract effective upon delivery of written notice to CONTRACTOR, or any later date stated in the notice:

1) If CONTRACTOR fails to provide services required by this Contract within the time specified or any extension agreed to by STATE; or

2) If CONTRACTOR fails to perform any of the other provisions of this Contract, or so fails to pursue the work as to endanger performance of this Contract in accordance with its terms.

The rights and remedies of STATE provided in this subsection are not exclusive and are in addition to any other rights and remedies provided by law or under this Contract.

6. Force Majeure. Neither party shall be held responsible for delay or default caused by fire, riot, terrorism, acts of God, or war if the event is beyond the party’s reasonable control and the affected party gives notice to the other party promptly upon occurrence of the event causing the delay or default or that is reasonably expected to cause a delay or default.

7. Works for Hire. CONTRACTOR acknowledges that all work(s) under this Contract is "work(s) for hire" within the meaning of the United States Copyright Act (Title 17 United States Code) and hereby assigns to STATE all rights and interests CONTRACTOR may have in the work(s) it prepares under this Contract, including any right to derivative use of the work(s). All software and related materials developed by CONTRACTOR in performance of this Contract for STATE shall be the sole property of STATE, and CONTRACTOR hereby assigns and transfers all its right, title, and interest therein to STATE.CONTRACTOR shall execute all necessary documents to enable STATE to protect STATE’s intellectual property rights under this section.

8. Work Product. All work product, equipment or materials created…