InnerSpring Mattress Core_Request for Quote Specs.pdf
PDF 44 KB Posted
- Solicitation number
- SRC0000035532
- Issued by
- Sandusky County, Cincinnati City, Ohio
About this file
This is a Request for Quote specifications document issued by the Ohio Department of Rehabilitation and Correction (DRC) through Ohio Penal Industries (OPI) for innerspring mattress cores to be manufactured and used at the Chillicothe Correctional Institution located at 15802 State Route 104 North, Chillicothe, Ohio. The bid seeks suppliers to provide innerspring mattress units in two sizes: 34 inches wide by 74 inches long (regular length) containing a minimum of 208 coils, and 34 inches wide by 78 inches long (long length) containing a minimum of 252 coils. These cores are intended for fabrication into mattresses for high-risk and public occupancy applications within the correctional facility. The specifications require perimeter and interior coils to be a minimum of 13 gauge, with coil height of 5 inches plus or minus one-quarter inch, and helical wire of 17 gauge or greater. All coils must be Bonnell type with a minimum of three turn/convolutions, constructed from high carbon spring steel with tensile strength between 205,000 and 275,000 p.s.i. Border rods must be 6-gauge high carbon spring steel extending around the full perimeter, and all units must be heat treated after assembly to relieve stress. Innerspring units are to be compressed, crated to meet all safety requirements, and delivered in bundles of 20 units.
The document does not contain information regarding pricing terms, set-aside provisions, incumbent suppliers, funding sources, contract award dates, response deadlines, or the term of the contract. These details would typically be found in the full solicitation document or accompanying bid instructions.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRC – Request for Quote: Innerspring Mattress Cores for OPI Mattress Shop
SPECIFICATIONS
I. SCOPE:
The purpose of this bid is to obtain a supplier to provide materials to be used in the fabrication of innerspring mattresses for high risk and public occupancy applications at the Ohio Penal Industries (OPI) Mattress Shop located at the Chillicothe Correctional Institution, 15802 State Route 104 North, Chillicothe, OH 45601.
II. PRODUCT REQUIREMENTS
A. Innerspring Mattress Unit
1. Units must be available in two (2) sizes: 34 ½ inches wide by 74 ½ (regular length) and 34 ½ inches wide by 78 ½ inches long (long length).
a. Regular length units are to consist of a minimum of 208 coils.
b. Long length units are to consist of a minimum or 252 coils.
2. Perimeter coils (outside rows) are to be a minimum of 13 gauge and interior coils
(middle six (6) rows) are to be a minimum of 13 ½ gauge.
3. Coil height must be 5”, +/- ¼”
4. Border rods must extend around the full perimeter of the unit, both top and bottom, and are to be 6-gauge high carbon spring steel.
5. Helical wire must be greater than or equal to 17 ½ gauge. Index
6. The complete spring units must be heat treated after assembly to relieve stress.
7. All coils must be Bonnell type and are to have no fewer than three (3) turn/convolutions (five counting top and bottom).
8. Coil wire must be high carbon spring steel, hard drawn American Steel grade or equal with tensile strength specifications of 205,000 p.s.i. minimum and 275,000 p.s.i. maximum.
9. Preparation for Delivery: Innerspring units must be compressed and crated, so as to meet all safety requirements, in bundles of 20 units.
10. Intended Use: The Innerspring Mattress Units required by this specification is intended for the use as mattress cores in the fabrication of mattresses for high risk and public occupancy applications.
File details come from the government source that posted it. Updated .