Industry Day RFI.pdf

PDF 138 KB Posted

Attached to
Industry Day - Program Depot Management (PDM)
Solicitation number
FA8575
Issued by

About this file

This is a Request for Information (RFI) issued by the Air Force Life Cycle Management Center (AFLCMC/WAQKA) at Robins Air Force Base, Georgia, for the Royal Saudi Air Force (RSAF) F-15SA Program Depot Maintenance (PDM) initiative under sources sought FA8575_F15_PDM.

The RFI invites vendors to participate in a virtual industry day via Microsoft Teams scheduled for Tuesday, May 26, 2026. The event will feature 45-minute time slots allocated on a first-come, first-served basis, with each presentation conducted privately between the United States Government and individual vendors. Interested vendors must respond to the RFI by 4:00 PM Eastern Daylight Time on May 21, 2026, to receive the link for time slot registration, and must reserve their slot by the same deadline. Vendors are required to submit read-ahead materials or presentations by May 22, 2026. During presentations, vendors should demonstrate their capabilities in performing nondestructive inspections of assets both on and off aircraft, installing assets that pass inspections back onto aircraft, installing Government Furnished Property (GFP), maintaining GFP calibration dates, and maintaining GFP serviceability. Responses should be submitted electronically to four designated Air Force personnel: PCO Leon Castellano, Buyer Chantel Cummings, Lockheed Martin representative Jermiah Johnson, and Engineer Ryan Patterson.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Request for Information

Royal Saudi Air Force (RSAF) F-15SA

Program Depot Maintenance (PDM)

AFLCMC/WAQKA

Robins AFB, GA

Purpose The Program Depot Maintenance (PDM) Office (AFCMC/WAK) is issuing an RFI to host a virtual industry day via Teams for the Program Depot Maintenance (PDM) aircraft under sources sought FA8575_F15_PDM. The industry day will be Tuesday 26 May 2026.

RFI

1. The industry day will consist of 45-minute time slots, first come-first served for presentations, questions, etc.

2. Each presentation will be private amongst the United Staes Government (USG) and identified vendor.

3. Things to consider in presentation:

Show how you are going to do the following:

• Perform nondestructive inspections of assets both on and off the aircraft

• install assets that pass the inspections back onto the aircraft

• install Government Furnished Property (GFP)

• maintain GFP calibration dates and

• maintain GFP serviceability

Instructions

1. Please respond to this RFI to be provided with the link to sign up for a time slot no later than 4:00 PM Eastern Daylight Time (EDT) on 21 May 2026.

2. Respondents must reserve time slot no later than 4:00 PM Eastern Daylight Time (EDT) on 21 May 2026.

3. Please provide read ahead or presentations by 22 May 2026.

4. Responses should be submitted as follows:

a. Electronic responses: Submit responses to the following e-mail addresses:

i. PCO: leon.Castellano@us.af.mil

ii. Buyer: chantel.cummings@us.af.mil

iii. LM: jermiah.johson.65@us.af.mil

iv. Engineer: ryan.patterson.1@us.af.mil

File details come from the government source that posted it. Updated .