IFB 161212 ATTACHMENT E-Materials Approval Information.pdf

This is an Attachment E Materials Approval Information document for Invitation for Bid (IFB) 161212 issued by the Commonwealth of Virginia for pipe rehabilitation work on Route 644 in Culpeper County. The document establishes material submission requirements for vendors bidding on the project to apply a spray-on pipe liner inside an existing corrugated metal pipe. Vendors must select and submit information for only one product type: either fiber-reinforced or non-shrink hydraulic cement mortar. For fiber-reinforced products, vendors must provide test data including shrinkage measurements, compressive strength values per ASTM C109, flexural strength and toughness values per ASTM C1609, modulus of elasticity per ASTM C469, and chloride ion penetration resistance per ASTM C1202. For non-shrink hydraulic cement mortar conforming to ASTM C1107, vendors must submit drying shrinkage data per ASTM C596, compressive strength values per ASTM C109, flexural strength per ASTM C78, and chloride ion penetration resistance per ASTM C1202.

All material characteristic values submitted must be absolute values that vendors independently verify against the standards listed. The document requires vendors to complete all applicable information corresponding to their selected material type to ensure compliance with project specifications and technical requirements for the pipe rehabilitation work.