Attachment 1 - Amended Bottle Filling Station with Acidifier Specifications.pdf
PDF 155 KB Posted
- Attached to
- Bottle Filling Station with Acidifier
- Solicitation number
- HU000126QE041
About this file
This document contains technical specifications for a Bottle Filling Station with Acidifier, an automated, self-contained system designed for vivarium and laboratory animal research facilities. The system must integrate water storage, chemical injection, and automated dispensing into a single point system with a 24-bottle filler capacity. Key components include a robust bottle fill table with built-in drainage, a cone-bottom reservoir tank paired with a dedicated pump and level sensors for continuous high-capacity water flow, and proportioning equipment featuring an injection/metering pump positioned low on the frame for positive priming to precisely mix stock treating solutions into the water supply.
The system must maintain a pH range from 2.5 to 3.5, include a pH probe installation, and handle Hydrochloric acid 2n. It features a front-mounted digital controller used to launch fill and purge routines while monitoring real-time system diagnostics. The system accommodates plain reverse osmosis water or accurately treats water via automated chlorination, acidification, or medication, with optional pH monitoring for strict quality verification. Additional specifications include adjustable timer controls for consistent volume delivery across varying bottle capacities, flexible configurations with fully interchangeable internal manifolds and case retainers, heavy-duty corrosion-resistant stainless steel frame construction, onboard front-mounted micro-processor control architecture, and operating modes including Fill, Purge, Stand-By, and Diagnostics. Safety features include safety and diagnostic alarms that display error codes and alert operators when reservoir water drops too low or when solution injection tanks require refilling.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Bottle Filling Station with Acidifier Specifications Background:
The Bottle Filling Station with acidifier is an automated, self-contained system designed for vivarium and laboratory animal research facilities.
Specifications:
Must integrate water storage, chemical injection, and automated dispensing into a single point system with 24 bottle filler.
● Bottle Fill Table & Drain: A robust workspace equipped with built-in drainage to cleanly catch any spilled water during high-volume cycles.
● Reservoir Tank & Pump: Uses a cone-bottom storage tank paired with a dedicated pump and level sensors to guarantee a continuous, high-capacity water flow
● Proportioning Equipment: Features an injection/metering pump positioned low on the frame for positive priming. It precisely mixes stock treating solutions directly into the water supply.
● Must have pH range from 2.5 to 3.5 pH range
● Must have a pH probe install.
● Must be able to handle Hydrochloric acid 2n.
● Controller: A front-mounted digital interface used to launch fill and purge routines while monitoring real-time system diagnostics.
● An injection pump injects the chemical additive from the solution tank into the water as bottles are filled to provide uniform treatment.
● If possible Water Customization: The system handles plain reverse osmosis (RO) water or accurately treats water via automated chlorination, acidification, or medication. An optional pH monitor can be integrated for strict quality verification.
● Adjustable Timer Controls: Operators can calibrate specific filling durations to guarantee consistent, highly accurate volume delivery across varying bottle capacities.
● Flexible Configurations: The internal manifold and case retainer are fully interchangeable to match your specific wire bottle basket footprints. Removable side walls also allow the system to be linked directly with automated laboratory conveyor systems.
● Safety & Diagnostic Alarms: The controller displays instant error codes and sounds alerts if the reservoir water drops too low or if the solution injection tank requires refilling.
● Equipment Type: Automated, self-contained laboratory animal bottle filling station.
● Frame Material: Heavy-duty, corrosion-resistant stainless steel.
● Control Architecture: Onboard front-mounted micro-process.
● Operating Modes: Fill, Purge, Stand-By, and Diagnostics.
https://hms.harvard.edu/sites/default/files/assets/Sites/Facilities/files/HMS_DS_PKG.pdf
● Fluid Flow System: Integrated cone-bottom water reservoir tank, continuous-duty delivery pump, and magnetic/electronic float level sensor.
File details come from the government source that posted it. Updated .