Attachment 1 - Bottle Filling Station with Acidifier Specifications.pdf
PDF 78 KB Posted
- Attached to
- Bottle Filling Station with Acidifier
- Solicitation number
- HU000126QE041
About this file
This document is a Specifications sheet for a Bottle Filling Station with Acidifier system designed for vivarium and laboratory animal research facilities. The equipment is an automated, self-contained system that integrates water storage, chemical injection, and automated dispensing into a single point system with 24-bottle capacity. Key technical requirements include a robust bottle fill table with built-in drainage, a cone-bottom reservoir tank paired with a dedicated pump and level sensors, and proportioning equipment featuring an injection/metering pump for precise mixing of stock treating solutions. The system must operate within a pH range of 2.5 to 3.5, include a pH probe installation, and be capable of handling Hydrochloric acid 2n. The controller features a front-mounted digital interface for launching fill and purge routines while monitoring real-time system diagnostics, with safety and diagnostic alarms that display error codes and alert operators to low reservoir levels or depleted solution tanks.
The system accommodates plain reverse osmosis (RO) water or automatically treats water via chlorination, acidification, or medication, with an optional pH monitor for quality verification. Adjustable timer controls enable operators to calibrate specific filling durations for consistent volume delivery across varying bottle capacities. The internal manifold and case retainer are fully interchangeable to match specific wire bottle basket footprints, and removable side walls allow direct linkage with automated laboratory conveyor systems. The frame is constructed of heavy-duty, corrosion-resistant stainless steel with onboard front-mounted micro-process control architecture. Operating modes include Fill, Purge, Stand-By, and Diagnostics. The fluid flow system incorporates an integrated cone-bottom water reservoir tank, continuous-duty delivery pump, and magnetic/electronic float level sensor. Optional installation services, including plumbing and electrical work, setup, and operator training, are available through the vendor.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Bottle Filling Station with Acidifier Specifications Background:
The Bottle Filling Stationwith acidifier is an automated,self-contained system designed forvivarium and laboratory animal research facilities.
Specifications:
Mustintegrate water storage, chemical injection,and automated dispensing into a single point system with 24 bottle filler.
● Bottle Fill Table & Drain: A robust workspace equippedwith built-in drainage to cleanly catch any spilled water during high-volume cycles.
● Reservoir Tank & Pump: Uses a cone-bottom storagetank paired with a dedicated pump and level sensors to guarantee a continuous, high-capacity water flow
● Proportioning Equipment: Features an injection/meteringpump positioned low on the frame for positive priming. It precisely mixes stock treating solutions directly into the water supply.
● Must have pH range from 2.5 to 3.5 pH range
● Must have a pH probe install.
● Must be able to handle Hydrochloric acid 2n.
● Controller: A front-mounted digital interface usedto launch fill and purge routines while monitoring real-time system diagnostics.
● An injection pump injects the chemical additive from the solution tank into the water as bottles are filled to provide uniform treatment.
● If possible Water Customization: The system handlesplain reverse osmosis (RO) water or accurately treats water via automatedchlorination, acidification,or medication. An optional pH monitor can be integrated for strict quality verification.
● Adjustable Timer Controls: Operators can calibratespecific filling durations to guarantee consistent, highly accurate volume delivery across varying bottle capacities.
● Flexible Configurations: The internal manifold andcase retainer are fully interchangeable to match your specific wire bottle basket footprints. Removable side walls also allow the system to be linked directly with automated laboratory conveyor systems.
● Safety & Diagnostic Alarms: The controller displaysinstant error codes and sounds alerts if the reservoir water drops too low or if the solution injection tank requires refilling.
● Equipment Type: Automated, self-contained laboratoryanimal bottle filling station.
● Frame Material: Heavy-duty, corrosion-resistant stainlesssteel.
● Control Architecture: Onboard front-mounted micro-process.
● Operating Modes: Fill, Purge, Stand-By, and Diagnostics.
https://hms.harvard.edu/sites/default/files/assets/Sites/Facilities/files/HMS_DS_PKG.pdf
● Fluid Flow System: Integrated cone-bottom water reservoir tank, continuous-duty delivery pump, and magnetic/electronic float level sensor.
● Optional installation (this will include plumbing and electrical by the vendor), set up, and training.
File details come from the government source that posted it. Updated .