TSA Terms and Conditions and Clauses_TSIC BAA 2019_Final.docx

Attachment 1 - Potential Clauses for Contract Award Information Assurance Requirements for TSA Government Acquisitions (April 2016) A. General Security Requirements A.1. The Contractor shall comply with all Federal, Department of Homeland Security (DHS) and Transportation Security Administration (TSA) security and privacy guidelines in effect at the time of the award of the contract, As well as those requirements that may be discretely added during the contract.

A.2. The Contractor shall perform periodic reviews to ensure compliance with all information security and privacy requirements.

A.3. The Contractor shall comply with all DHS and TSA security controls to ensure that the Government's security requirements are met. These controls are described in DHS PD 4300A and TSA MD 1400 series security policy documents and are based on the current National Institute of Standards and Technology (NIST) Special Publication (SP) 800-53 standards.

A.4. The Contractor shall include this guidance in all subcontracts at any tier where the subcontractor is performing the work defined in this statement of work (SOW).

A.5. The Contractor shall ensure all staff have the required level of security clearance commensurate with the sensitivity of the information being accessed, stored, processed, transmitted or otherwise handled by the System or required to perform the work stipulated by the contract. At a minimum, all Contractor staff shall be subjected to a Public Trust background check and be granted a Public Trust clearance before access to the System or other TSA resources is granted.

A.6. The Contractor shall sign a DHS Non-Disclosure Agreement (NDA) within (30) calendar days of the contract start date.

A.7. The Contractor shall not release, publish, or disclose agency information to unauthorized personnel, and shall protect such information in accordance with the provisions of the pertinent laws and regulations governing the confidentiality of sensitive information.

A.8. The Contractor shall ensure that its staff follow all policies and procedures governing physical, environmental, and information security described in the various TSA regulations pertaining thereto, and the specifications, directives, and manuals for conducting work to generate the products as required by this contract. Personnel shall be responsible for the physical security of their area and government furnished equipment (GFE) issued to the contractor under the terms of the contract.

A.9. The Contractor shall make all system information and documentation produced in support of the contract available to TSA upon request.

B. Training Requirements

B.1. All Contractor employees, requiring system access, shall receive initial Organizational Security Fundamentals Training within 60 days of assignment to the contract via the Online Learning Center (OLC). Refresher training shall be completed annually thereafter.

B.2. The Contractor shall complete annual online training for Organizational Security Fundamentals and TSA Privacy training.

B.3. Role Based training is required for contract employees with Significant Security Responsibility (SSR), whose job proficiency is required for overall network security within TSA, and shall be in accordance with DHS and TSA policy. The contractor will be notified if they have a position with significant security responsibility.

B.4. Individuals with SSR shall have a documented individual training and education plan, which shall ensure currency with position skills requirements, with the first course to be accomplished within 90 days of employment or change of position. The individual training plan shall be refreshed annually or immediately after a change in the individual’s position description requirements.

B.5. Information Secuirty and Privacy training supplied by the Contractor shall meet standards established by NIST and set forth in DHS and TSA security policy.

B.6. The Contractor shall maintain a list of all employees who have completed training and shall submit this list to the contracting officer representative (COR) upon request, or during DHS/TSA onsite validation visits performed on a periodic basis.

B.7. The contractor shall its employees review and sign the TSA Form 1403 Computer and Wireless Mobile Device Access Agreement (CAA) prior to accessing IT systems.

C. Configuration Management (hardware/software) C.1. Hardware or software configuration changes shall be in accordance with the DHS Information Security Performance Plan (current year and any updates thereafter), the DHS Continuous Diagnostics and Mitigation (CDM) Program to include dashboard reporting requirements and TSA’s Configuration Management policy. The TSA Chief Information Security Officer (CISO)/Information Assurance and Cyber Security Division (IAD) shall be informed of and involved in all configuration changes to the TSA IT environment including systems, software, infrastructure architecture, infrastructure assets, and end user assets. The TSA IAD POC shall approve any request for change prior to any development activity occurring for that change and shall define the security requirements for the requested change. The COR will provide access to the DHS Information Security Performance Plan.

C.2. The Contractor shall ensure all application or configuration patches and/or Requests for Change (RFC) have approval by the Technical Discussion Forum (TDF), Systems Configuration Control Board (SCCB) and lab regression testing prior to controlled change release under the security policy document, TSA Management Directive (MD) 1400.3 Information Technology Security and TSA Information Assurance (IA) Handbook, unless immediate risk requires immediate intervention. Approval for immediate intervention (emergency change) requires approval of the TSA CISO, SCCB co-chairs, and the appropriate Operations Manager, at a minimum.

C.3. The Contractor shall ensure all sites impacted by patching are compliant within 14 days of change approval and release.

C.4. The acquisition of commercial-off-the-shelf (COTS) Information Assurance (IA) and IA-enabled IT products (to be used on systems entering, processing, storing, displaying, or transmitting “sensitive information”) shall be limited to those products that have been evaluated and validated, as appropriate, in accordance with the following:

· The NIST FIPS validation program.

· The National Security Agency (NSA)/NIST, National Information Assurance Partnership (NIAP) Evaluation and Validation Program.

· The International Common Criteria for Information Security Technology Evaluation Mutual Recognition Agreement.

C.5. US Government Configuration Baseline and DHS Configuration Guidance

a) The provider of information technology shall certify applications are fully functional and operate correctly as intended on systems using the US Government Configuration Baseline (USGCB) and in accordance with DHS and TSA guidance.

1. USGCB Guidelines:

a. http://usgcb.nist.gov/usgcb_content.html

2. DHS Sensitive Systems Configuration Guidance

a. http://dhsconnect.dhs.gov/org/comp/mgmt/cio/iso/Pages/sscg.aspx

b) The standard installation, operation, maintenance, updates and/or patching of software shall not alter the configuration settings from the approved USGCB configuration. The information technology shall also use the Windows Installer Service for installation to the default “program files” directory and shall be able to discretely install and uninstall.

c) Applications designed for general end users shall run in the general user context without elevated system administration privileges.

C.6. The Contractor shall establish processes and procedures for continuous monitoring of Contractor systems that contain TSA data/information by ensuring all such devices are monitored by, and report to, the TSA Security Operations Center (SOC). The Contractor shall perform monthly security scans on servers that contain TSA data, and shall send monthly scan results to the TSA IAD.

(End of term)

Sensitive Information Required Special Contract Terms (MARCH 2015) SAFEGUARDING OF SENSITIVE INFORMATION (MAR 2015)

(a) Applicability. This clause applies to the Contractor, its subcontractors, and Contractor employees (hereafter referred to collectively as “Contractor”). The Contractor shall insert the substance of this clause in all subcontracts.

(b) Definitions. As used in this clause— “Personally Identifiable Information (PII)” means information that can be used to distinguish or trace an individual's identity, such as name, social security number, or biometric records, either alone, or when combined with other personal or identifying information that is linked or linkable to a specific individual, such as date and place of birth, or mother’s maiden name. The definition of PII is not anchored to any single category of information or technology. Rather, it requires a case-by-case assessment of the specific risk that an individual can be identified. In performing this assessment, it is important for an agency to recognize that non-personally identifiable information can become personally identifiable information whenever additional information is made publicly available—in any medium and from any source—that, combined with other available information, could be used to identify an individual.

PII is a subset of sensitive information. Examples of PII include, but are not limited to: name, date of birth, mailing address, telephone number, Social Security number (SSN), email address, zip code, account numbers, certificate/license numbers, vehicle identifiers including license plates, uniform resource locators (URLs), static Internet protocol addresses, biometric identifiers such as fingerprint, voiceprint, iris scan, photographic facial images, or any other unique identifying number or characteristic, and any information where it is reasonably foreseeable that the information will be linked with other information to identify the individual.

“Sensitive Information” is defined in HSAR clause 3052.204-71, Contractor Employee Access, as any information, which if lost, misused, disclosed, or, without authorization is accessed, or modified, could adversely affect the national or homeland security interest, the conduct of Federal programs, or the privacy to which individuals are entitled under section 552a of Title 5, United States Code (the Privacy Act), but which has not been specifically authorized under criteria established by an Executive Order or an Act of Congress to be kept secret in the interest of national defense, homeland security or foreign policy. This definition includes the following categories of information:

(1) Protected Critical Infrastructure Information (PCII) as set out in the Critical Infrastructure Information Act of 2002 (Title II, Subtitle B, of the Homeland Security Act, Public Law 107-296, 196 Stat. 2135), as amended, the implementing regulations thereto (Title 6, Code of Federal Regulations, Part 29) as amended, the applicable PCII Procedures Manual, as amended, and any supplementary guidance officially communicated by an authorized official of the Department of Homeland Security (including the PCII Program Manager or his/her designee);

(2) Sensitive Security Information (SSI), as defined in Title 49, Code of Federal Regulations, Part 1520, as amended, “Policies and Procedures of Safeguarding and Control of SSI,” as amended, and any supplementary guidance officially communicated by an authorized official of the Department of Homeland Security (including the Assistant Secretary for the Transportation Security Administration or his/her designee);

(3) Information designated as “For Official Use Only,” which is unclassified information of a sensitive nature and the unauthorized disclosure of which could adversely impact a person’s privacy or welfare, the conduct of Federal programs, or other programs or operations essential to the national or homeland security interest; and

(4) Any information that is designated “sensitive” or subject to other controls, safeguards or protections in accordance with subsequently adopted homeland security information handling procedures.

“Sensitive Information Incident” is an incident that includes the known, potential, or suspected exposure, loss of control, compromise, unauthorized disclosure, unauthorized acquisition, or unauthorized access or attempted access of any Government system, Contractor system, or sensitive information.

“Sensitive Personally Identifiable Information (SPII)” is a subset of PII, which if lost, compromised or disclosed without authorization, could result in substantial harm, embarrassment, inconvenience, or unfairness to an individual. Some forms of PII are sensitive as stand-alone elements. Examples of such PII include: Social Security numbers (SSN), driver’s license or state identification number, Alien Registration Numbers (A-number), financial account number, and biometric identifiers such as fingerprint, voiceprint, or iris scan. Additional examples include any groupings of information that contain an individual’s name or other unique identifier plus one or more of the following elements:

Other PII may be “sensitive” depending on its context, such as a list of employees and their performance ratings or an unlisted home address or phone number. In contrast, a business card or public telephone directory of agency employees contains PII but is not sensitive.

(c) Authorities. The Contractor shall follow all current versions of Government policies and guidance accessible at http://www.dhs.gov/dhs-security-and-training-requirements-contractors, or available upon request from the Contracting Officer, including but not limited to:

(1) DHS Management Directive 11042.1 Safeguarding Sensitive But Unclassified (for Official Use Only) Information

(2) DHS Sensitive Systems Policy Directive 4300A

(3) DHS 4300A Sensitive Systems Handbook and Attachments

(4) DHS Security Authorization Process Guide

(5) DHS Handbook for Safeguarding Sensitive Personally Identifiable Information

(6) DHS Instruction Handbook 121-01-007 Department of Homeland Security Personnel Suitability and Security Program

(7) DHS Information Security Performance Plan (current fiscal year)

(8) DHS Privacy Incident Handling Guidance

(9) Federal Information Processing Standard (FIPS) 140-2 Security Requirements for Cryptographic Modules accessible at http://csrc.nist.gov/groups/STM/cmvp/standards.html

(10) National Institute of Standards and Technology (NIST) Special Publication 800-53 Security and Privacy Controls for Federal Information Systems and Organizations accessible at http://csrc.nist.gov/publications/PubsSPs.html

(11) NIST Special Publication 800-88 Guidelines for Media Sanitization accessible at http://csrc.nist.gov/publications/PubsSPs.html

(d) Handling of Sensitive Information. Contractor compliance with this clause, as well as the policies and procedures described below, is required.

(1) Department of Homeland Security (DHS) policies and procedures on Contractor personnel security requirements are set forth in various Management Directives (MDs), Directives, and Instructions. MD 11042.1, Safeguarding Sensitive But Unclassified (For Official Use Only) Information describes how Contractors must handle sensitive but unclassified information. DHS uses the term “FOR OFFICIAL USE ONLY” to identify sensitive but unclassified information that is not otherwise categorized by statute or regulation. Examples of sensitive information that are categorized by statute or regulation are PCII, SSI, etc. The DHS Sensitive Systems Policy Directive 4300A and the DHS 4300A Sensitive Systems Handbook provide the policies and procedures on security for Information Technology (IT) resources. The DHS Handbook for Safeguarding Sensitive Personally Identifiable Information provides guidelines to help safeguard SPII in both paper and electronic form. DHS Instruction Handbook 121-01-007 Department of Homeland Security Personnel Suitability and Security Program establishes procedures, program responsibilities, minimum standards, and reporting protocols for the DHS Personnel Suitability and Security Program.

(2) The Contractor shall not use or redistribute any sensitive information processed, stored, and/or transmitted by the Contractor except as specified in the contract.

(3) All Contractor employees with access to sensitive information shall execute DHS Form 11000-6, Department of Homeland Security Non-Disclosure Agreement (NDA), as a condition of access to such information. The Contractor shall maintain signed copies of the NDA for all employees as a record of compliance. The Contractor shall provide copies of the signed NDA to the Contracting Officer’s Representative (COR) no later than two (2) days after execution of the form.

(4) The Contractor’s invoicing, billing, and other recordkeeping systems maintained to support financial or other administrative functions shall not maintain SPII. It is acceptable to maintain in these systems the names, titles and contact information for the COR or other Government personnel associated with the administration of the contract, as needed.

(e) Authority to Operate. The Contractor shall not input, store, process, output, and/or transmit sensitive information within a Contractor IT system without an Authority to Operate (ATO) signed by the Headquarters or Component CIO, or designee, in consultation with the Headquarters or Component Privacy Officer. Unless otherwise specified in the ATO letter, the ATO is valid for three (3) years. The Contractor shall adhere to current Government policies, procedures, and guidance for the Security Authorization (SA) process as defined below.

(1) Complete the Security Authorization process. The SA process shall proceed according to the DHS Sensitive Systems Policy Directive 4300A (Version 11.0, April 30, 2014), or any successor publication, DHS 4300A Sensitive Systems Handbook (Version 9.1, July 24, 2012), or any successor publication, and the Security Authorization Process Guide including templates.

(i) Security Authorization Process Documentation. SA documentation shall be developed using the Government provided Requirements Traceability Matrix and Government security documentation templates. SA documentation consists of the following: Security Plan, Contingency Plan, Contingency Plan Test Results, Configuration Management Plan, Security Assessment Plan, Security Assessment Report, and Authorization to Operate Letter. Additional documents that may be required include a Plan(s) of Action and Milestones and Interconnection Security Agreement(s). During the development of SA documentation, the Contractor shall submit a signed SA package, validated by an independent third party, to the COR for acceptance by the Headquarters or Component CIO, or designee, at least thirty (30) days prior to the date of operation of the IT system. The Government is the final authority on the compliance of the SA package and may limit the number of resubmissions of a modified SA package. Once the ATO has been accepted by the Headquarters or Component CIO, or designee, the Contracting Officer shall incorporate the ATO into the contract as a compliance document. The Government’s acceptance of the ATO does not alleviate the Contractor’s responsibility to ensure the IT system controls are implemented and operating effectively.

(ii) Independent Assessment. Contractors shall have an independent third party validate the security and privacy controls in place for the system(s). The independent third party shall review and analyze the SA package, and report on technical, operational, and management level deficiencies as outlined in NIST Special Publication 800-53 Security and Privacy Controls for Federal Information Systems and Organizations. The Contractor shall address all deficiencies before submitting the SA package to the Government for acceptance.

(iii) Support the completion of the Privacy Threshold Analysis (PTA) as needed. As part of the SA process, the Contractor may be required to support the Government in the completion of the PTA. The requirement to complete a PTA is triggered by the creation, use, modification, upgrade, or disposition of a Contractor IT system that will store, maintain and use PII, and must be renewed at least every three (3) years. Upon review of the PTA, the DHS Privacy Office determines whether a Privacy Impact Assessment (PIA) and/or Privacy Act System of Records Notice (SORN), or modifications thereto, are required. The Contractor shall provide all support necessary to assist the Department in completing the PIA in a timely manner and shall ensure that project management plans and schedules include time for the completion of the PTA, PIA, and SORN (to the extent required) as milestones. Support in this context includes responding timely to requests for information from the Government about the use, access, storage, and maintenance of PII on the Contractor’s system, and providing timely review of relevant compliance documents for factual accuracy. Information on the DHS privacy compliance process, including PTAs, PIAs, and SORNs, is accessible at http://www.dhs.gov/privacy-compliance.

(2) Renewal of ATO. Unless otherwise specified in the ATO letter, the ATO shall be renewed every three (3) years. The Contractor is required to update its SA package as part of the ATO renewal process. The Contractor shall update its SA package by one of the following methods: (1) Updating the SA documentation in the DHS automated information assurance tool for acceptance by the Headquarters or Component CIO, or designee, at least 90 days before the ATO expiration date for review and verification of security controls; or (2) Submitting an updated SA package directly to the COR for approval by the Headquarters or Component CIO, or designee, at least 90 days before the ATO expiration date for review and verification of security controls. The 90 day review process is independent of the system production date and therefore it is important that the Contractor build the review into project schedules. The reviews may include onsite visits that involve physical or logical inspection of the Contractor environment to ensure controls are in place.

(3) Security Review. The Government may elect to conduct random periodic reviews to ensure that the security requirements contained in this contract are being implemented and enforced. The Contractor shall afford DHS, the Office of the Inspector General, and other Government organizations access to the Contractor’s facilities, installations, operations, documentation, databases and personnel used in the performance of this contract. The Contractor shall, through the Contracting Officer and COR, contact the Headquarters or Component CIO, or designee, to coordinate and participate in review and inspection activity by Government organizations external to the DHS. Access shall be provided, to the extent necessary as determined by the Government, for the Government to carry out a program of inspection, investigation, and audit to safeguard against threats and hazards to the integrity, availability and confidentiality of Government data or the function of computer systems used in performance of this contract and to preserve evidence of computer crime.

(4) Continuous Monitoring. All Contractor-operated systems that input, store, process, output, and/or transmit sensitive information shall meet or exceed the continuous monitoring requirements identified in the Fiscal Year 2014 DHS Information Security Performance Plan, or successor publication. The plan is updated on an annual basis. The Contractor shall also store monthly continuous monitoring data at its location for a period not less than one year from the date the data is created. The data shall be encrypted in accordance with FIPS 140-2 Security Requirements for Cryptographic Modules and shall not be stored on systems that are shared with other commercial or Government entities. The Government may elect to perform continuous monitoring and IT security scanning of Contractor systems from Government tools and infrastructure.

(5) Revocation of ATO. In the event of a sensitive information incident, the Government may suspend or revoke an existing ATO (either in part or in whole). If an ATO is suspended or revoked in accordance with this provision, the Contracting Officer may direct the Contractor to take additional security measures to secure sensitive information. These measures may include restricting access to sensitive information on the Contractor IT system under this contract. Restricting access may include disconnecting the system processing, storing, or transmitting the sensitive information from the Internet or other networks or applying additional security controls.

(6) Federal Reporting Requirements. Contractors operating information systems on behalf of the Government or operating systems containing sensitive information shall comply with Federal reporting requirements. Annual and quarterly data collection will be coordinated by the Government. Contractors shall provide the COR with requested information within three (3) business days of receipt of the request. Reporting requirements are determined by the Government and are defined in the Fiscal Year 2014 DHS Information Security Performance Plan, or successor publication. The Contractor shall provide the Government with all information to fully satisfy Federal reporting requirements for Contractor systems.

(f) Sensitive Information Incident Reporting Requirements.

(1) All known or suspected sensitive information incidents shall be reported to the Headquarters or Component Security Operations Center (SOC) within one hour of discovery in accordance with 4300A Sensitive Systems Handbook Incident Response and Reporting requirements. When notifying the Headquarters or Component SOC, the Contractor shall also notify the Contracting Officer, COR, Headquarters or Component Privacy Officer, and US-CERT using the contact information identified in the contract. If the incident is reported by phone or the Contracting Officer’s email address is not immediately available, the Contractor shall contact the Contracting Officer immediately after reporting the incident to the Headquarters or Component SOC. The Contractor shall not include any sensitive information in the subject or body of any e-mail. To transmit sensitive information, the Contractor shall use FIPS 140-2 Security Requirements for Cryptographic Modules compliant encryption methods to protect sensitive information in attachments to email. Passwords shall not be communicated in the same email as the attachment. A sensitive information incident shall not, by itself, be interpreted as evidence that the Contractor has failed to provide adequate information security safeguards for sensitive information, or has otherwise failed to meet the requirements of the contract.

(2) If a sensitive information incident involves PII or SPII, in addition to the reporting requirements in 4300A Sensitive Systems Handbook Incident Response and Reporting, Contractors shall also provide as many of the following data elements that are available at the time the incident is reported, with any remaining data elements provided within 24 hours of submission of the initial incident report:

(i) Data Universal Numbering System (DUNS);

(ii) Contract numbers affected unless all contracts by the company are affected;

(iii) Facility CAGE code if the location of the event is different than the prime contractor location;

(iv) Point of contact (POC) if different than the POC recorded in the System for Award Management (address, position, telephone, email);

(v) Contracting Officer POC (address, telephone, email);

(vi) Contract clearance level;

(vii) Name of subcontractor and CAGE code if this was an incident on a subcontractor network;

(viii) Government programs, platforms or systems involved;

(ix) Location(s) of incident;

(x) Date and time the incident was discovered;

(xi) Server names where sensitive information resided at the time of the incident, both at the Contractor and subcontractor level;

(xii) Description of the Government PII and/or SPII contained within the system;

(xiii) Number of people potentially affected and the estimate or actual number of records exposed and/or contained within the system; and

(xiv) Any additional information relevant to the incident.

(g) Sensitive Information Incident Response Requirements.

(1) All determinations related to sensitive information incidents, including response activities, notifications to affected individuals and/or Federal agencies, and related services (e.g., credit monitoring) will be made in writing by the Contracting Officer in consultation with the Headquarters or Component CIO and Headquarters or Component Privacy Officer.

(2) The Contractor shall provide full access and cooperation for all activities determined by the Government to be required to ensure an effective incident response, including providing all requested images, log files, and event information to facilitate rapid resolution of sensitive information incidents.

(3) Incident response activities determined to be required by the Government may include, but are not limited to, the following:

(i) Inspections,

(ii) Investigations,

(iii) Forensic reviews, and

(iv) Data analyses and processing.

(4) The Government, at its sole discretion, may obtain the assistance from other Federal agencies and/or third-party firms to aid in incident response activities.

(h) Additional PII and/or SPII Notification Requirements.

(1) The Contractor shall have in place procedures and the capability to notify any individual whose PII resided in the Contractor IT system at the time of the sensitive information incident not later than 5 business days after being directed to notify individuals, unless otherwise approved by the Contracting Officer. The method and content of any notification by the Contractor shall be coordinated with, and subject to prior written approval by the Contracting Officer, in consultation with the Headquarters or Component Privacy Officer, utilizing the DHS Privacy Incident Handling Guidance. The Contractor shall not proceed with notification unless the Contracting Officer, in consultation with the Headquarters or Component Privacy Officer, has determined in writing that notification is appropriate.

(2) Subject to Government analysis of the incident and the terms of its instructions to the Contractor regarding any resulting notification, the notification method may consist of letters to affected individuals sent by first class mail, electronic means, or general public notice, as approved by the Government. Notification may require the Contractor’s use of address verification and/or address location services. At a minimum, the notification shall include:

(i) A brief description of the incident;

(ii) A description of the types of PII and SPII involved;

(iii) A statement as to whether the PII or SPII was encrypted or protected by other means;

(iv) Steps individuals may take to protect themselves;

(v) What the Contractor and/or the Government are doing to investigate the incident, to mitigate the incident, and to protect against any future incidents; and

(vi) Information identifying who individuals may contact for additional information.

(i) Credit Monitoring Requirements. In the event that a sensitive information incident involves PII or SPII, the Contractor may be required to, as directed by the Contracting Officer:

(1) Provide notification to affected individuals as described above; and/or

(2) Provide credit monitoring services to individuals whose data was under the control of the Contractor or resided in the Contractor IT system at the time of the sensitive information incident for a period beginning the date of the incident and extending not less than 18 months from the date the individual is notified. Credit monitoring services shall be provided from a company with which the Contractor has no affiliation. At a minimum, credit monitoring services shall include:

(i) Triple credit bureau monitoring;

(ii) Daily customer service;

(iii) Alerts provided to the individual for changes and fraud; and

(iv) Assistance to the individual with enrollment in the services and the use of fraud alerts; and/or

(3) Establish a dedicated call center. Call center services shall include:

(i) A dedicated telephone number to contact customer service within a fixed period;

(ii) Information necessary for registrants/enrollees to access credit reports and credit scores;

(iii) Weekly reports on call center volume, issue escalation (i.e., those calls that cannot be handled by call center staff and must be resolved by call center management or DHS, as appropriate), and other key metrics;

(iv) Escalation of calls that cannot be handled by call center staff to call center management or DHS, as appropriate;

(v) Customized FAQs, approved in writing by the Contracting Officer in coordination with the Headquarters or Component Chief Privacy Officer; and

(vi) Information for registrants to contact customer service representatives and fraud resolution representatives for credit monitoring assistance.

(j) Certification of Sanitization of Government and Government-Activity-Related Files and Information. As part of contract closeout, the Contractor shall submit the certification to the COR and the Contracting Officer following the template provided in NIST Special Publication 800-88 Guidelines for Media Sanitization.

(k) Security Training Requirements.

(1) All users of Federal information systems are required by Title 5, Code of Federal Regulations, Part 930.301, Subpart C, as amended, to be exposed to security awareness materials annually or whenever system security changes occur, or when the user’s responsibilities change. The Department of Homeland Security (DHS) requires that Contractor employees take an annual Information Technology Security Awareness Training course before accessing sensitive information under the contract. Unless otherwise specified, the training shall be completed within thirty (30) days of contract award and be completed on an annual basis thereafter not later than October 31st of each year. Any new Contractor employees assigned to the contract shall complete the training before accessing sensitive information under the contract. The training is accessible at http://www.dhs.gov/dhs-security-and-training-requirements-contractors. The Contractor shall maintain copies of training certificates for all Contractor and subcontractor employees as a record of compliance. Unless otherwise specified, initial training certificates for each Contractor and subcontractor employee shall be provided to the Contracting Officer’s Representative (COR) not later than thirty (30) days after contract award. Subsequent training certificates to satisfy the annual training requirement shall be submitted to the COR via e-mail notification not later than October 31st of each year. The e-mail notification shall state the required training has been completed for all Contractor and subcontractor employees.

(2) The DHS Rules of Behavior apply to every DHS employee, Contractor and subcontractor that will have access to DHS systems and sensitive information. The DHS Rules of Behavior shall be signed before accessing DHS systems and sensitive information. The DHS Rules of Behavior is a document that informs users of their responsibilities when accessing DHS systems and holds users accountable for actions taken while accessing DHS systems and using DHS Information Technology resources capable of inputting, storing, processing, outputting, and/or transmitting sensitive information. The DHS Rules of Behavior is accessible at http://www.dhs.gov/dhs-security-and-training-requirements-contractors. Unless otherwise specified, the DHS Rules of Behavior shall be signed within thirty (30) days of contract award. Any new Contractor employees assigned to the contract shall also sign the DHS Rules of Behavior before accessing DHS systems and sensitive information. The Contractor shall maintain signed copies of the DHS Rules of Behavior for all Contractor and subcontractor employees as a record of compliance. Unless otherwise specified, the Contractor shall e-mail copies of the signed DHS Rules of Behavior to the COR not later than thirty (30) days after contract award for each employee. The DHS Rules of Behavior will be reviewed annually and the COR will provide notification when a review is required.

(l) Privacy Training Requirements. All Contractor and subcontractor employees that will have access to Personally Identifiable Information (PII) and/or Sensitive PII (SPII) are required to take Privacy at DHS: Protecting Personal Information before accessing PII and/or SPII. The training is accessible at http://www.dhs.gov/dhs-security-and-training-requirements-contractors. Training shall be completed within thirty (30) days of contract award and be completed on an annual basis thereafter not later than October 31st of each year. Any new Contractor employees assigned to the contract shall also complete the training before accessing PII and/or SPII. The Contractor shall maintain copies of training certificates for all Contractor and subcontractor employees as a record of compliance. Initial training certificates for each Contractor and subcontractor employee shall be provided to the COR not later than thirty (30) days after contract award. Subsequent training certificates to satisfy the annual training requirement shall be submitted to the COR via e-mail notification not later than October 31st of each year. The e-mail notification shall state the required training has been completed for all Contractor and subcontractor employees.

(End of Clause)

H.3052.204-70 SECURITY REQUIREMENTS FOR UNCLASSIFIED INFORMATION TECHNOLOGY RESOURCES (JUN 2006)

(a) The Contractor shall be responsible for Information Technology (IT) security for all systems connected to a DHS network or operated by the Contractor for DHS, regardless of location. This clause applies to all or any part of the contract that includes information technology resources or services for which the Contractor must have physical or electronic access to sensitive information contained in DHS unclassified systems that directly support the agency’s mission.

(b) The Contractor shall provide, implement, and maintain an IT Security Plan. This plan shall describe the processes and procedures that will be followed to ensure appropriate security of IT resources that are developed, processed, or used under this contract.

(1) Within 30 days after contract award, the contractor shall submit for approval its IT Security Plan, which shall be consistent with and further detail the approach contained in the offeror's proposal. The plan, as approved by the Contracting Officer, shall be incorporated into the contract as a compliance document.

(2) The Contractor’s IT Security Plan shall comply with Federal laws that include, but are not limited to, the Computer Security Act of 1987 (40 U.S.C. 1441 et seq.); the Government Information Security Reform Act of 2000; and the Federal Information Security Management Act of 2002; and with Federal policies and procedures that include, but are not limited to, OMB Circular A-130.

(3) The security plan shall specifically include instructions regarding handling and protecting sensitive information at the Contractor’s site (including any information stored, processed, or transmitted using the Contractor’s computer systems), and the secure management, operation, maintenance, programming, and system administration of computer systems, networks, and telecommunications systems.

(c) Examples of tasks that require security provisions include--

(1) Acquisition, transmission or analysis of data owned by DHS with significant replacement cost should the contractor’s copy be corrupted; and

(2) Access to DHS networks or computers at a level beyond that granted the general public (e.g., such as bypassing a firewall).

(d) At the expiration of the contract, the contractor shall return all sensitive DHS information and IT resources provided to the contractor during the contract, and certify that all non-public DHS information has been purged from any contractor-owned system. Components shall conduct reviews to ensure that the security requirements in the contract are implemented and enforced.

(e) Within 6 months after contract award, the contractor shall submit written proof of IT Security accreditation to DHS for approval by the DHS Contracting Officer. Accreditation will proceed according to the criteria of the DHS Sensitive System Policy Publication, 4300A (Version 2.1, July 26, 2004) or any replacement publication, which the Contracting Officer will provide upon request. This accreditation will include a final security plan, risk assessment, security test and evaluation, and disaster recovery plan/continuity of operations plan. This accreditation, when accepted by the Contracting Officer, shall be incorporated into the contract as a compliance document. The contractor shall comply with the approved accreditation documentation.

(End of clause)

H.3052.204-71 CONTRACTOR EMPLOYEE ACCESS (SEP 2012)

(a) Sensitive Information, as used in this clause, means any information, which if lost, misused, disclosed, or, without authorization is accessed, or modified, could adversely affect the national or homeland security interest, the conduct of Federal programs, or the privacy to which individuals are entitled under section 552a of title 5, United States Code (the Privacy Act), but which has not been specifically authorized under criteria established by an Executive Order or an Act of Congress to be kept secret in the interest of national defense, homeland security or foreign policy. This definition includes the following categories of information:

(1) Protected Critical Infrastructure Information (PCII) as set out in the Critical Infrastructure Information Act of 2002 (Title II, Subtitle B, of the Homeland Security Act, Public Law 107-296, 196 Stat. 2135), as amended, the implementing regulations thereto (Title 6, Code of Federal Regulations, Part 29) as amended, the applicable PCII Procedures Manual, as amended, and any supplementary guidance officially communicated by an authorized official of the Department of Homeland Security (including the PCII Program Manager or his/her designee);

(2) Sensitive Security Information (SSI), as defined in Title 49, Code of Federal Regulations, Part 1520, as amended, “Policies and Procedures of Safeguarding and Control of SSI,” as amended, and any supplementary guidance officially communicated by an authorized official of the Department of Homeland Security (including the Assistant Secretary for the Transportation Security Administration or his/her designee);

(3) Information designated as “For Official Use Only,” which is unclassified information of a sensitive nature and the unauthorized disclosure of which could adversely impact a person’s privacy or welfare, the conduct of Federal programs, or other programs or operations essential to the national or homeland security interest; and

(4) Any information that is designated “sensitive” or subject to other controls, safeguards or protections in accordance with subsequently adopted homeland security information handling procedures.

(b) “Information Technology Resources” include, but are not limited to, computer equipment, networking equipment, telecommunications equipment, cabling, network drives, computer drives, network software, computer software, software programs, intranet sites, and internet sites.

(c) Contractor employees working on this contract must complete such forms as may be necessary for security or other reasons, including the conduct of background investigations to determine suitability. Completed forms shall be submitted as directed by the Contracting Officer. Upon the Contracting Officer's request, the Contractor's employees shall be fingerprinted, or subject to other investigations as required. All Contractor employees requiring recurring access to Government facilities or access to sensitive information or IT resources are required to have a favorably adjudicated background investigation prior to commencing work on this contract unless this requirement is waived under Departmental procedures.

(d) The Contracting Officer may require the Contractor to prohibit individuals from working on the contract if the Government deems their initial or continued employment contrary to the public interest for any reason, including, but not limited to, carelessness, insubordination, incompetence, or security concerns.

(e) Work under this contract may involve access to sensitive information. Therefore, the Contractor shall not disclose, orally or in writing, any sensitive information to any person unless authorized in writing by the Contracting Officer. For those Contractor employees authorized access to sensitive information, the Contractor shall ensure that these persons receive training concerning the protection and disclosure of sensitive information both during and after contract performance.

(f) The Contractor shall include the substance of this clause in all subcontracts at any tier where the subcontractor may have access to Government facilities, sensitive information, or resources.

(End of clause)

ALTERNATE I (SEP 2012)

(g) Before receiving access to IT resources under this contract the individual must receive a security briefing, which the Contracting Officer’s Technical Representative (COTR) will arrange, and complete any nondisclosure agreement furnished by DHS.

(h) The Contractor shall have access only to those areas of DHS information technology resources explicitly stated in this contract or approved by the COTR in writing as necessary for performance of the work under this contract. Any attempts by Contractor personnel to gain access to any information technology resources not expressly authorized by the statement of work, other terms and conditions in this contract, or as approved in writing by the COTR, is strictly prohibited. In the event of violation of this provision, DHS will take appropriate actions with regard to the contract and the individual(s) involved.

(i) Contractor access to DHS networks from a remote location is a temporary privilege for mutual convenience while the Contractor performs business for the DHS Component. It is not a right, a guarantee of access, a condition of the contract, or Government Furnished Equipment (GFE).

(j) Contractor access will be terminated for unauthorized use. The Contractor agrees to hold and save DHS harmless from any unauthorized use and agrees not to request additional time or money under the contract for any delays resulting from unauthorized use or access.

(k) Non-U.S. citizens shall not be authorized to access or assist in the development, operation, management or maintenance of Department IT systems under the contract, unless a waiver has been granted by the Head of the Component or designee, with the concurrence of both the Department’s Chief Security Officer (CSO) and the Chief Information Officer (CIO) or their designees. Within DHS Headquarters, the waiver may be granted only with approval of both the CSO and the CIO or their designees. In order for a waiver to be granted:

(1) There must be a compelling reason for using this individual as opposed to a U. S. citizen; and

(2) The waiver must be in the best interest of the Government.

(l) Contractors shall identify in their proposals the names and citizenship of all non-U.S. citizens proposed to work under the contract. Any additions or deletions of non-U.S. citizens after contract award shall also be reported to the Contracting Officer.

(End of clause)

H.5200.204.002 CONTRACTOR PERSONNEL ACCESS TO TSA FACILITIES, INFORMATION AND/OR SYSTEMS (SEP 2018)

A. All Contractor personnel requiring access to TSA facilities, information systems, and/or information will be subject to the security procedures set forth in this contract.

B. All contractor employees seeking to provide services to TSA under a TSA contract are subject to a fitness determination to assess whether their initial employment or continued employment on a TSA contract protects or promotes the efficiency of the agency. TSA, by and through the Law Enforcement/Federal Air Marshall Service’s, Personnel Security Section (PerSec), will allow a contractor employee to commence work on a TSA contract only if a review of the contractor employee’s preliminary background check is favorable. Contractor employees with unfavorable preliminary background checks will not be allowed to work on a TSA contract.

C. A fitness determination involves the following three phases:

1. Phase 1: Enter On Duty Fitness Determination: a review of a contractor employee’s consumer credit report, criminal history records, and submitted security forms to determine, to the extent possible, if the contractor employee has bad debt and/or criminal offenses and/or falsification issues that would prohibit employment as a TSA contractor. This determination may include verification of citizenship for contractor employees born outside of the United States. A favorable Enter On Duty Suitability Determination is not a final fitness determination; rather, it is a preliminary review of external data sources that allows the contractor employee to commence work prior to the required background investigation being completed.

When a contractor employee is deemed eligible to commence work on a TSA contract, TSA PerSec will notify the appropriate Contracting Officer’s Representative…