Exhibit_10_CPE_Amendment_2.pdf

PDF 161 KB Posted

Attached to
Protective Security Officer (PSO) services
Solicitation number
HSHQDC-16-R-00095
Issued by

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Exhibit 10 Contractor-Provided Equipment

1. Uniform Requirements

The Contractor shall furnish uniform clothing items, as indicated below, to PSOs performing on this Contract. Badges, patches, and other approved devices worn on uniforms shall carry distinctive company markings and in compliance with applicable state and local laws. Note:

Regional Directors, or designee, may authorize adjustments to uniform clothing items to account for varying climate zones.

Uniform Components Description Color Minimum

Body Armor Minimum, NIJ Level IIA with Concealed Carrier Black

Boots Pair, Quarter Black

Cap Baseball Style Black

Cap Knit Winter Cap Black

Double Magazine Case or Speed Loader Case Nylon, Compatible with Specified Weapon Black

Duty Belt “Keepers” Nylon Black

Expandable or Straight Police With Holder Black

Glove and Microshield

Nylon, Slide on Belt Type, Holds Set of Single Use Disposable Gloves and One (1) Single Use

Black

Gloves Winter, Pair Black

Handcuff Case Nylon Black

Handcuffs and Keys Meets NIJ 0307.01

Jacket Winter, Patrol Type Black

Jacket Nylon Windbreaker or similar Black

Jacket Full-length Rain Coat Black

Key Strap with Flap Nylon Black

Retention Holster Minimum, Level II, Nylon, Slide on Belt Type with hammer safety strap (left/right as required)

Black

Microshield Single Use, Disposable

Nameplate

2-1/2” x 5/8” Metal Plate with Rounded Edges and 1/4” Lettering Identifying First Initial and Last Name

Gold Metal with Black Lettering

Oleoresin Capsicum (OC)

2.0 ounce Non-Flammable Flip Top Safety Canister with Stream or Foam Spray Pattern (or as designated by State or local

Oleoresin Capsicum (OC) case

Nylon, Slide on Belt Type Black

Pistol belt Nylon without Shoulder Strap Black

Shirt, long sleeve Patrol Duty Uniform (PDU) Insignia, Shoulder Patch

Gray

Shirt, short sleeve Patrol Duty Uniform (PDU) Insignia, Shoulder Patch

Gray

Trouser Patrol Duty Uniform (PDU), Class B Pants.

All Season Weight

Black

Whistle With Chain Attachment

Flashlight w/holder Portable Black

Optional/Regional Specific

The contractor will provide all security officers, including part-time and reserve officers, with their own pistol. Select the firearm that will be used:

Caliber .40 S&W

Specifications

1. Caliber .40 S&W

The overall size shall not exceed 7.5” long, 5.5” high, and 1.5” wide and weigh no more than 30 oz.

excluding the magazine. The caliber authorized is .40 S&W and not any larger. The magazines (three for each pistol) shall hold a minimum of 10 rounds and not more than 15. The pistol must be able to be fired without a magazine inserted into the weapon. The magazine must fall free (unloaded) when the magazine catch is activated. The double action only trigger pull must not weigh more than 12 pounds and not less than 5 pounds. The pistol may be either a traditional double action only or a striker fired design.

The pistol shall have a dark corrosive resistant finish and must be must be capable of being fired without the manipulation of an external safety or cocking lever. Passively operated grip or trigger safeties are acceptable. The normal function of the pistol shall be double action only.

The pistol must be operable by a right or left-handed user. The use of a polymer-framed pistol is acceptable. There is not a requirement for an all-metal firearm.

All safeties must be internal or passive. An inertial interlocked firing pin will be the primary safety to positively prevent movement of the firing pin unless the trigger is pulled completely through its entire length of travel.

The sights must be drift adjustable and be luminous night sights, one (1) dot on the front sight, and two (2) dots on the rear sight, which appear as three (3) illuminated dots when the weapon is held at arm’s length. The illuminated dots must not be visible when viewed from the muzzle end of the pistol.

The color of the illuminated dots must be green. The illumination materials for the night sight must comply with Nuclear Regulatory Commission standards.

The following pistols are recommended:

• Smith & Wesson M&P .40 Cal.

• Glock 22 & 23 .40 Cal.

• SIGARMS Sigpro .40 Cal.; P226 and P229

• Steyr M Series .40 Cal.

• Springfield Armory XD in .40 Cal.

• H&K USP (Variant 7 DAO) .40 Cal.

Ammunition type authorized:

• 155-180 grain Jacketed Hollow Point

Recommended Brands:

• Federal

• Speer

• Winchester

• Remington

2. Personal Protective Equipment Requirement

The Contractor shall maintain a stock of the following Personal Protective Equipment (PPE) items for each PSO, post, and location covered by this contract and in quantities sufficient for a two-week period.

The Contractor shall maintain all equipment in a ready and usable condition and replenish stock as necessary to ensure a two-week supply is available at all times.

Item Description QTY

Eyewear Blood and Air Borne Protection * Gloves Medical Examination Gloves * Hand Sanitizer Alcohol-Based * N95 Mask Filtering Face Piece Respirator * Microshield Single Use, Disposable *

* As appropriate to supply each security officer this equipment for at least two weeks in performance of their duties. Contractor shall replace disposable continuous wear items such as masks and gloves over course of a PSOs shift as recommended by manufacturer to ensure maximum effectiveness of the item.

3. Communications Equipment Requirement.

The Contractor shall provide, maintain, and supplement, as may be necessary at the site identified above, the following number(s) of radios/cellular phones and described associated equipment/ to equip each security officer on post a method to communicate with FPSFPB.

Type of Equipment Qty

Radio, portable, handy-talkie, four (4) watts, with Helifex antenna

Charger, rapid rate, portable

Charger, rapid rate, desktop

Battery, rapid rate

Standard carrying case

Base Station

Cellular telephone

Cellular telephone charger

Cellular telephone holder

Licenses and Frequencies: The Contractor shall apply for an FCC license and authorization to operate in frequencies specified by the Government. Where necessary, the COR shall issue a letter of authorization, identifying the Contractor as having a need to communicate over a frequency or frequencies assigned to an agency of the Federal Government.

Normal, Emergency and Continuous Communications: All two-way portable radio units must have the capability of transmitting and receiving clear and concise vocal transmissions between the security officer, supervisory personnel and the Contractor's base station.

The cellular phones must have a telephone number with the local area code of the location of the post. The cellular phone shall have the capability to receive and make calls without restrictions for having the capability for two-way communications between FPS, the Contractor, and the security officer personnel assigned to this Contract.

The Contractor shall provide a listing of radio(s) and associated equipment used on this Contract to the COR prior to standing post. The Contractor shall provide a listing of cellular telephone numbers and the associated posts used on this Contract to the COR prior to standing post.

4. Contractor Vehicle Requirement

The Contractor shall furnish vehicle(s), as indicated below, for patrol, to transport supervisors in the course of supervision duties, or emergency response, as may be necessary. The vehicles shall carry distinctive markings of the company. The vehicles shall be available at all times during the life of the contract.

The Contractor shall immediately replace a vehicle must be removed from operation for any reason. It is the Contractor's responsibility to register, insure, and provide proper maintenance for the vehicles. The vehicles shall have the following equipment:

• Rotational emergency roof light in compliance with applicable state and local laws

• One (1) 10 – 15 lb. portable dry chemical, ABC extinguisher, installed and maintained in accordance with NFPA 10, Portable Fire Extinguishers

• One (1) conventional, universal first aid kit that contains an Airway pack, Cling bandages, and a minimum of two bite sticks

Vehicle Type

Estimated use mi/hrs

Vehicle Type

Estimated use mi/hrs

5. Supplementary Equipment

The Contractor shall furnish the following supplemental equipment items for each PSO, post, or location as indicated.

Item Description Qty

6. NWDTP Equipment

In addition to the Government Provided Property, the contractor shall provide the following items to supplement the training kit:

Metal butter knives (6 EA), (3 EA), 9 volt batteries (6 EA), AA batteries (6 EA), AAA batteries (6 EA) , Large set of keys (1 EA), Small set of keys (1 EA), Toggle switch with paired wires (2 EA), Cell phone (Must have battery and cell circuitry installed) (1 EA), Bag glass marbles or glass aquarium stones (1 EA), Clothing/rag (Enough to serve as clutter), Bottled water (16 ounce/500

ml) (6 EA), Gym bags/Briefcases/Day packs/Computer Bags (12 EA), FedEx/UPS box (6 EA), Athletic Shoes (1 pair), Tennis Balls (3 EA), Ream of copy paper (2 RM), Digital kitchen timer (1 EA), Bag of screws/nails (1 BG), Scissors (less than 2.5”) (1 EA), Surge suppressor/power strip (1 EA), Cell phone/Tablet/Computer charging cords (4 EA), Collapsible baton (1 EA), Liquid baby formula (1 EA), Powder baby formula (1 EA), Carton of iodized salt (1 EA).

1. Uniform Requirements
Specifications
1. Caliber .40 S&W
2. Personal Protective Equipment Requirement
3. Communications Equipment Requirement.
4. Contractor Vehicle Requirement
5. Supplementary Equipment
6. NWDTP Equipment

File details come from the government source that posted it. Updated .