Amendment_0002_for_FBO.pdf

1. CONTRACT ID CODE PAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable) 0002 24 July 2017 2118858***001

6. ISSUED BY CODE HSCG85 7. ADMINISTERED BY (If other than Item 6) CODE

USCG COMMAND

Surface Forces Logistics Centers, C&PD2-LREPL 1301 Clay Street, Suite 800N, Oakland, CA 94612

SAME AS BLOCK #6

8. NAME AND ADRESS OF CONTRACTOR (no., street, county, State and ZIP Code) √ 9.A AMENDMENT OF SOLICITATION NO.

TO ALL PROSPECTIVE OFFERORS

HSCG85-18-R-P45001

9B. DATE (SEE ITEM 11)

07 July 2017

10A. MODIFICATION OF CONTRACT/ORDER

NO. ?

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the Offer submitted: or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT/.ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority).

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

SUBJECT: RFP No. HSCG85-18-R-P45001 USCGC STRATTON (WMSL 752), Dockside Repairs FQ1 FY18

SEE PAGE 2 FOR DESCRIPTION

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Wilma L. Estrada, Contracting Officer 15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)PREVIOUS

EDITION UNUSABLE Prescribed by GSA, FAR (48 CFR) 53.243

HSCG85-18-R-P45001

USCGC STRATTON (WMSL 752) Dockside Repairs FQ1 FY18 Amendment No. 0002

The purpose of this amendment is to reply to the following Requests for Clarification:

Question 1: This is relating to Definite Work Item D-03; AT and WT Door, Renew; Paragraph 1.2: Item Description says the new door’s are Powder Coated White, however paragraph 3.10.1 require the new closures and coamings to be painted. Contractor recommends all disturbed surfaces IAW 3.10.2 Touch Up Preservation.

Answer to Question 1: The USCG has confirmed that all the AT/WT doors will arrive from the OEM in white powder coat IAW the specification. The door frames will be coated in an inorganic zinc primer and will require painting IAW 3.10.1 of the specification.

IAW paragraph 3.10.2, touch up preservation shall be used on any surfaces disturbed pursuant to installation of the fittings in question.

Question 2: This is in reference to Definite Work Item D-06; Deck Covering (Slip Resistant) Mast Platforms, Repair; Paragraph 3.1.4: Does any of the Mast Equipment Interferences 3.1.4 have to be removed?

Answer to Question 2: All existing cable transits and antennae have kick pipes installed which should alleviate the need for equipment removal; however, the Contractor shall handle all interferences in accordance with SFLC STD Spec 0000, paragraph 3.3.5, which states:

“3.3.5 Interferences. The Contractor shall remove all interferences in way of specified work, as necessary, without regard to whether interferences are listed in applicable work items; restore all removed interferences upon completion of the specified work. The Contractor may exercise the discretion to work around certain interferences, when possible, so long as the specified work is successfully accomplished.”

The Coast Guard is willing to facilitate a ship check on a sister ship to allow the contractor to assess whether or not they feel they can achieve adequate surface preparation IAW the specification without damaging installed systems.

Question 3: This is in reference to Definite Work Item D-10; Handrail and Grabrail, Install;

Paragraph 3.3: Of the 31 Scuttles, how many require more than 1? (3.3)

Answer to Question 3: The Coast Guard has identified some inconsistencies between the verbiage in the specification the referenced drawing revision (750-WMSL-612-502 Rev A).

The most current drawing revision is 750-WMSL-612-502 Rev B and will be provided via AMRDEC Safe Site to all potential offerors who have requested the original set of drawings. On this drawing 31 hatches/scuttles are denoted, of which, 19 require 2 hand grabs. See hand grab list and locations table on sheet 3 and 4 of the drawing.