Excerpt from COMDTINST M10360.3D Colors and Coatings Manual.pdf

Appendix C to COMDTINST M10360.3D

C-11

General Material Class

Coating

FED-STD-595 Color

Total Rust and Corrosion Control RDP (NSN: 8030-01-356-8690 / 5 gal / CO)

SLIP RESISTANT SHEETS

3M Safety-Walk 770 Coarse Slip Resistant Surfacing

(authorized for all cutters and boats) Deck Gray

3M Safety-Walk 710 Coarse Slip Resistant Surfacing (authorized for maintenance of existing 710 systems only)

Black

3M Safety-Walk 610 General Purpose Slip Resistant Surfacing (No longer authorized – existing material should be replaced by 3M Safety-Walk 770 during next scheduled availability)

3M Safety-Walk Primer - 3M Safety-Walk Edge Sealing Compound No. 5569 -

SYNTHETIC WOOD FINISH (Use following or similar material.)

Akzo Nobel Sikkens Cetol Marine Satin Akzo Nobel Sikkens Cetol Marine Gloss Gloss Overcoat Flood Deks Olje #1 Matte Flood Deks Olje #2 Gloss Overcoat

2. Military/Federal Specification. Although National Stock Numbers are provided for convenience, any products that are listed on the Qualified Products List (QPL) for a given military/federal specification may be used. If there is no QPL for a given military/federal specification, any product certified as meeting all requirements of that specification may be used.

MIL-

SPEC

Coating FED-STD-595 Color

National Stock No.

Quantity U/I

FED SPEC TT-P-28 ALUMINUM HEAT RESISTING PAINT

1200oF nominal Aluminum 8010-01-344-5121 1.0 gal GL 1200oF nominal Aluminum 8010-01-344-5122 5.0 gal CN

FED SPEC TT-R-248 PAINT AND LACQUER REMOVER, SOLVENT TYPE (Inactive, but still available through GSA or use commercial equivalent)

- 8010-00-943-7128 1.0 gal GL

- 8010-00-515-2258 5.0 gal CN

FED SPEC TT-F-340 PLASTIC WOOD FILLER (Cancelled, but still available through GSA or use commercial equivalent) Natural 8030-00-262-9171 4.0 oz CN Natural 8030-00-262-9172 1.0 lb LB Light

Mahogany 8030-00-664-7077 4.0 oz CN

Walnut 8030-00-664-7088 4.0 oz CN

FED SPEC TT-S-711 STAIN, OIL TYPE, WOOD, INTERIOR (Cancelled, but still available through GSA or use commercial equivalent) Cherry 8010-00-165-4422 1.0 qt QT Dark Mahogany 8010-00-281-2075 1.0 gal GL

C-12

SPEC

Coating FED-STD-595 Color

National Stock No.

Quantity U/I

Dark Oak 8010-00-165-8628 1.0 qt QT Dark Oak 8010-00-281-2072 1.0 gal GL Dark Walnut 8010-00-281-2076 1.0 gal GL Light Oak 8010-00-597-8226 1.0 qt QT Light Oak 8010-00-166-0746 1.0 gal GL Light Walnut 8010-00-281-2074 1.0 gal GL Mahogany 8010-00-161-7264 1.0 pt PT Mahogany 8010-00-165-8627 1.0 qt QT Maple 8010-00-281-2077 1.0 qt QT Maple 8010-00-598-7669 1.0 gal GL Red Mahogany 8010-00-281-2071 1.0 gal GL Walnut 8010-00-597-8225 1.0 gal GL

CID A-A-1800 SPAR VARNISH OIL (Cancelled, but still available through GSA or use commercial equivalent)

- 8010-01-497-9756 1.0 pt PT

- 8010-00-597-7856 1.0 gal GL

- 8010-00-251-6980 5.0 gal CN

MIL-PRF-16173 CORROSION PREVENTION COMPOUNDS, SOLVENT CUTBACK, COLD APPLICATION,

THIN FILM

Class II, Grade 3, Soft Film, Water Displacing - 8030-01-396-5748 1.0 gal GL Class II, Grade 3, Soft Film, Water Displacing - 8030-01-347-0971 5.0 gal CN

MIL-PRF-17951 DECK COVERING, LIGHTWEIGHT NONSLIP (TREAD MATERIAL)

6.0" Width, 24.0" Length Black 7220-00-205-0389 - EA

MIL-R-19907 GLASS REINFORCED PLASTIC LAMINATE (FIBERGLASS) REPAIR KIT

- 2090-00-372-6064 - KT

MIL-PRF-23236 COATING SYSTEMS, FOR SHIP STRUCTURES

Fuel and/or Seawater Tanks (applied at temperatures > 50oF) (Type IV, V, or VI/Class 5/Grade C) PPG Amercoat 236 - - - - International Intergard 264 FPA327 - - - - International Interline 604 THA660 Series - - - - Sherwin Williams N11-100 Series - - - -

Fuel and/or Seawater Tanks (applied at temperatures 32 oF to 50oF) (Type IV, V, or VI/Class 5/Grade B) International Intergard 264 FPA321 - - - -

Ballast Tanks (applied at temperatures > 50oF) (Type IV, V, or VI/Class 7/Grade C) PPG Amercoat 235 - - - - PPG Amercoat 385 - - - - International Intergard 403 KB Series - - - - International Intertuf 262 Series KHA Series - - - -

NCP NBR 235 - - - -

Sherwin Williams Duraplate 235/Duraplate UHS - - - -

Ballast Tanks (applied at temperatures 32 oF to 50oF) (Type IV, V, or VI/Class 7/Grade B) PPG Amercoat 235 - - - - International Intertuf 262 Series KHA Series - - - -

C-13

SPEC

Coating FED-STD-595 Color

National Stock No.

Quantity U/I

Fuel and/or Seawater Tanks, High Solids, Edge-Retentive (applied at temperatures > 50oF) (Type VII/Class 5 /Grade C)

PPG Primer:

Amercoat 133 PPG Stripecoat/Topcoat:

Amercoat 333

Off-white/Red

Gray/Buff/

Pastel Green

International Interline 624 Primer: THA 626/THA627 Topcoat: THA 620 Series/THA627

Buff

Various

Sherwin-Williams Primer:

Dura-Plate UHS B62L210/B62V210 Sherwin-Williams Topcoat:

Dura-Plate UHS B62W210/ B62V210 Dura-Plate UHS B62W210/ B62G210 Dura-Plate UHS B62W210/B62A210

Blue

White Green

Light Gray

Sherwin Williams FastClad ER Primer: B62L230/B62V230 Topcoat: B62W230/B62V230 B62W230/B62G230 B62W230/B62A230

Blue

Light Gray

Sherwin Williams Primer:

Nova-Plate UHS B62L220/B62V220 Sherwin Williams Stripecoat/Topcoat:

Nova-Plate UHS B62A220/B62V220 Nova-Plate UHS B62W220/ B62V220 Nova-Plate UHS B62W220/ B62G220

Light Blue

Gray

Sigma Primer/Stripecoat/Topcoat:

Edgeguard 5427 Edgeguard 5428 Edgeguard 5428-5000

Cream

Ballast Tanks, High Solids, Edge-Retentive (applied at temperatures > 50oF) (Type VII/Class 7/Grade C) International Primer:

Intergard 143 (THA 141/THA 148) International Stripecoat/Topcoat:

Intergard 143 (THA 143/THA 148) Intergard 143 (THA 144/THA 148)

Pink

Sherwin Williams Euronavy Primer: ES301K

Topcoat: ES301S

Red/Haze Gray/

White/Gray/

Red/Haze Gray

Sigma Primer:

Sigmaguard BT Primer 5404 Sigmaguard BT Primer 5404 Sigma Stripecoat/Topcoat:

Sigma Sigmaguard BT 5411-5000 Sigma Sigmaguard BT 5411-5000 Sigma Sigmaguard BT 5411-S674 Sigma Sigmaguard BT 5411-S674 Sigma Sigmaguard BT 5411-7000 Sigma Sigmaguard BT 5411-7000

Amber Amber

Aqua Green Aqua Green

8010-01-470-7107 8010-01-470-7113

8010-01-470-8105 8010-01-470-7126 8010-01-470-8108 8010-01-470-8110 8010-01-470-7129 8010-01-470-7124

1.0 gal

5.0 gal

1.0 gal

5.0 gal

KT

KT

KT

C-14

SPEC

Coating FED-STD-595 Color

National Stock No.

Quantity U/I

Ballast Tanks, High Solids, Edge-Retentive (applied at temperatures 32-49oF) (Type VII/Class 7/Grade B)

Sherwin Williams Euronavy Primer: ES301L

Topcoat: ES301S

Red/Haze Gray/

White/Red/Gray

/Haze Gray

Grey Water, Sewage, and CHT Tanks High Solids, Edge-Retentive (applied at temperatures > 50oF) (Type

VII/Class 13/Grade C)

International Interline 624 Primer: THA 626/THA627 Topcoat: THA 620 Series/THA627

Various

Sherwin Williams Primer:

Nova-Plate UHS B62L220/B62V220 Sherwin Williams Stripecoat/Topcoat:

Nova-Plate UHS B62A220/B62V220 Nova-Plate UHS B62W220/ B62V220 Nova-Plate UHS B62W220/ B62G220

Light Blue

Sigma Primer/Stripecoat/Topcoat:

Edgeguard 5427 Edgeguard 5428 Edgeguard 5428-5000

Cream

MIL-PRF-24176 CEMENT, EPOXY, METAL REPAIR & HULL SMOOTHING

PPG Amercoat 140 Epoxy Repair Compound Gray - - - A. W. Chesterton ARC 10 Gray - - - A. W. Chesterton ARC 858 Gray - - - Belzona 1311 Ceramic R-Metal Gray - - - Belzona 1111 Super Metal Gray - - - Belzona 1211 E-Metal Gray - - - Chem Seal CS 2725 Epoxy Bonding Compound Gray - - - Enecon Epoxit 6003/403 Gray - - - Enecon Metalclad Duralloy Gray - - - Enecon Metalclad CeramAlloy CP Gray - - - International Intergard 822 Epoxy Filler Red - - - ITW Devcon Aluminum Putty F Aluminum - - - ITW Devcon Ceramic Repair Putty Dark Blue - - - ITW Devcon Plastic Steel Putty (A) Gray - - - ITW Devcon Titanium Putty Gray - - - ITW Philadelphia Resins Repair Compound Blue - - - Thortex Cerami-Tech EG Gray - - - Thortex Metal-Tech EG Gray - - -

MIL-PRF-24596 NONFLAMING FIRE-PROTECTIVE COATING COMPOUNDS

Rosewood 22519 8010-01-208-5832 1.0 gal GL Rosewood 22519 8010-01-208-1774 5.0 gal CN Beach Sand 22563 8010-01-206-4712 1.0 gal GL Beach Sand 22563 8010-01-208-7772 5.0 gal CN Sun Glow 23697 8010-01-209-1153 1.0 gal GL Sun Glow 23697 8010-01-208-7774 5.0 gal CN