HSCG40-16-Q-P30B48_A00001_(continued).pdf

HSCG40-16-Q-P30B48

Amendment Number A00001

14A. This Amendment is issued to answer the following questions submitted in response to this solicitation:

Question 1: Work Item D-001. General Welding, Provide. Paragraph 1.2. This is the only weld repairs needed, correct?

Answer: Yes as per the MRR and 02 A-Team meetings this was the only spot that was recognized to be welded, but as with any DD there may be some other areas after the boat is hauled out and as work items get activated that may need to be welded.

Question 2: Work Item D-015. Standard Hoses, Renew. Are these hoses Non-

Applicable, which means they are not part of the hoses to be renewed?

Answer: Yes.

Question 3. Work Item D-016. Lazarette Intake Vent, Inspect. Paragraph 3.2. Is this a remove, clean, inspect, and reinstall visual inspection?

Answer: Just a visual for obvious corrosion and deterioration. After the initial inspection and damage is noticed then proceed with a CIR for further tasking.

Question 4. Work Item D-018. Sea Strainers – Duplex (All Sizes), Overhaul.

Paragraph 3.2.4 & 3.3 are using incorrect test procedures and incorrect hardware materials. Can we use specs that were just released on other 47MLB’s?

Answer: Yes

Question 5. Work Item D-022. Rudder Assembly, Remove, Inspect and Reinstall.

Paragraph 3.4.1 to 3.4.3.7 appears to be made for the 52 MLBs, not the 47 MLBs. Can we utilize previous 47MLB rudder specs?

Question 6. Work Item D-023. Hull Identification Markings, Apply. Are we to just renew what is in the table or do all the strips have to be sandblasted and painted accordingly?

HSCG40-16-Q-P30B48

Amendment Number A00001

14B. The date and time established for receipt of proposals remains May 06, 2016 at

12:00 PM EST.

All other terms and conditions remain unchanged.

(END OF AMENDMENT NUMBER A00001)