SUMMARY_OF_CHANGES.doc
DOC document 35 KB Posted
- Attached to
- USCG Shafts Purchase
- Solicitation number
- HSCG40-13-R-11003
About this file
SUMMARY OF CHANGES
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SUMMARY_OF_CHANGES.doc | DOC document | |
| SF-30_Amendment_2_Solicitation_Shafts.docx | DOCX document | |
| SF-30_Amendment_Solicitation_Shafts.docx | DOCX document | |
| Solicitation_Shafts.docx | DOCX document | |
| GOVERNMENT_FURNISHED_PROPERTY_DISCREPANCY_REPORT(3)_Shafts.docx | DOCX document | |
| Solicitation_Shafts.docx | DOCX document | |
| SF_294_Subcontracting_Report_for_Individual_Contracts.pdf | ||
| DHS_Form_700-5_Contractor_Report_of_Government_Property_(Shafts).pdf | ||
| Preparation_for_Delivery_Shafts.pdf | ||
| DHS_700-21_Material_Inspection_Receiving_Report.pdf | ||
| SF_295_Summary_Subcontract_Report.pdf | ||
| P-243-0211_Rev__J_(110_Shaft_Purchase_-_Final).pdf | ||
| OMB_SF_LLL_Lobbying_Activities.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SUMMARY OF CHANGES
For Solicitation Number HSCG40-13-R-11003
1. Page 4, Standard Form 1449 Solicitation/Contract/Order for Commercial Items, was updated with the correct Solicitation Issue Date and Offer Due Date/Local Time.
2. Pages 39 and 42 were updated with the correct Offer Due Date/Local Time.
Several questions were presented during the solicitation period. Below are the questions asked, answers to those questions and change(s), if any, that were made as a result of the question.
Question 1: In the technical proposal the government requests that the offeror shall indicate that they possess the following equipment.
1. CNC Lathe with 4” Spindle
2. Shaft Straightener, 29’
3. Total Indicated Runout Fixture
If the offeror does not possess one of the following items is it grounds to disqualify?
Answer: No. Not possessing one of the listed equipment does not disqualify an offeror; however, how would your company manufacture the shafts to specification without all of the equipment listed? The Company’s approach to manufacturing the shafts would have to detail how it would be done, such as the alternative that would be used to manufacture the shafts to specification. This alternative approach would have to be a part of your Technical Proposal and will be a factor in your company’s Technical Evaluation Rating.
Change: No change was required as a result of this question.
Question 2: Will there be an initial order of ten (10) shafts?
Answer: Yes.
Change: No change was required as a result of this question.
Question 3: There is not any detailed information on the taper required. Only the specification of 29.825:1 taper and the small end diameter of 3.344 Reference diameter is given. I need more detail on the dimensional requirements. Is this ratio (angle) with the shaft centerline or is it included angle.
Answer: Question was not understood. More detail is needed in order to answer this question.
Change: No change was required as a result of this question.
Question 4: What is the length of the taper (along the shaft axis of rotation)?
Answer: To find the length of the tapered section, simply apply the taper ratio to the 3.344 inch diameter and determine the run to reach 4 inches.
Change: No change was required as a result of this question.
File details come from the government source that posted it. Updated .