SolicitationII.doc

All questions regarding this solicitation must be submitted in writing. You may either fax your questions to Ashley Pezeshkian at (410) 762-6270 or e-mail them to Ashley.A.Pezeshkian@uscg.mil. No inquiries will be answered verbally.

Government forms, as contained in the table of contents of the solicitation, can be accessed electronically from the Forms Library at http://www.gsa.gov/formslibrary, or at https://dhsonline.dhs.gov/portal/jhtml/dc/sf.jhtml?doid=13604

Offers received in response to this Request for Proposal, must be received at the following address prior to the date and time established for receipt of proposals.

U.S. Coast Guard Engineering Logistics Center

Propulsion Systems Acquisition Branch (Code 046)

Mail Stop 25, Bldg. 31, 2nd Floor

2401 Hawkins Point Road

Baltimore, MD 21226-5000

Proposals submitted electronically or via facsimile will NOT be accepted. Packages containing proposals must be clearly addressed and identified with the Solicitation Number.

Effective 01 January 2002, all Coast Guard vendors must be registered in Central Contractor Registration (CCR) System in order to be awarded a contract. For more information on CCR and to register online, simply visit the CCR web site:

http://www.ccr.gov or call the Coast Guard Finance Center Customer Service line at (757) 523-6940.

Ombudsman Notice

Notice for Filing Agency Protests

It is the policy of the Coast Guard to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the General Accounting Office (GAO). Interested parties are encouraged to seek resolution of their concerns within the Coast Guard as an Alternative Dispute Resolution (ADR) forum, rather than filing a protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the contracting officer or Ombudsman.

Informal forum with the Ombudsman. Interested parties who believe that a Coast Guard procurement is unfair or otherwise defective should first direct their concerns to the cognizant contracting officer. If the contracting officer is unable to satisfy the concerns, the interested party is encouraged to seek resolution of their concerns within the Coast Guard Ombudsman for Agency Protests. Under this informal process, the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, contracting officer, and solicitation closing date (if applicable).

Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the contracting officer through open and frank discussions. If the protester’s concerns are unresolved, an independent review is available by the Ombudsman. The protester may file a formal agency protest to either the contracting officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency’s goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth at FAR 33.103(d)(2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. This will not preclude re-filing of the protest to meet the requirement. To be timely, protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be forwarded to the address below:

Commandant (CG-851)

2100 2nd Street, SW, Room 2606 Washington, D. C. 20593 Telephone (202) 372-3692 Fax: (202) 372-3949

Section B

Supplies or Services and Prices/Costs Note: Pricing for CLIN’s B.0.2 through B.0.21, and all corresponding option year CLIN’s, shall include all shipping charges, including any brokerage fees and/or duties.

Pricing Structure:

BASE YEAR

Unit Total

CLIN

Description

QTY.

Price Price

accordance with specification P-245-0146

1 SET

B.0.2

B.0.2A Propeller: 18” Diameter, 16” Pitch

P/N: J755-18-16-1-1/4-RH-3BLD

NSN: 2010-01-419-3990

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.**

1 EA

1 EA

B.0.3

B.0.3A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-LH

NSN: 2010-01-033-4476

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

B.0.4

B.0.4A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-RH

NSN: 2010-01-074-2420

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

B.0.5

B.0.5A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32LH

NSN: 2010-01-125-3273

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.6

B.0.6A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32RH

NSN: 2010-01-130-4949

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.7

B.0.7A Propeller: 28” Diameter, 36” Pitch

P/N: 47B MLB 243-010 ITEM 18 PORT

NSN: 2010-01-463-9096

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

B.0.8

B.0.8A Propeller: 28” Diameter, 36” Pitch

P/N: 47B 243-010 ITEM 17

NSN: 2010-01-463-9101

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

B.0.9

B.0.9A Propeller: 31” Diameter, 22” Pitch

P/N: J-5001-LH

NSN: 2010-01-450-5805

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

B.0.10

B.0.10A

Propeller: 31” Diameter, 22” Pitch

P/N: J-5001 RH

NSN: 2010-01-450-5807

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

1 EA

B.0.11

B.0.11A Propeller: 56” Diameter, 46” Pitch

P/N: 4B56DX46P-RH

NSN: 2010-01-482-6135

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.12

B.0.12A Propeller: 48” Diameter, 46” Pitch

P/N: 48X46L.H.

NSN: 2010-01-501-5755

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.13

B.0.13A Propeller: 48” Diameter, 46” Pitch

P/N: 48X46R.H.

NSN: 2010-01-501-5749

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.14

B.0.14A Propeller: 48” Diameter, 40” Pitch

P/N: 75-WLIC-245-001LH

NSN: 2010-01-534-9095

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.15

B.0.15A Propeller: 48” Diameter, 40” Pitch

P/N: 75-WLIC-245-001RH

NSN: 2010-01-534-9089

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.16

B.0.16A

Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-LH

NSN: 2010-01-377-2284

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.17

B.0.17A Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-RH

NSN: 2010-01-377-2308

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.18

B.0.18A Propeller: 48” Diameter, 43” Pitch

P/N: 48X43L.H.

NSN: 2010-01-501-5506

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.0.19

B.0.19A Propeller: 48” Diameter, 43” Pitch

P/N: 48X43R.H.

NSN: 2010-01-501-5504

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

B.0.20

B.0.20A Propeller: 46” Diameter, 51” Pitch

P/N: 46X51L.H.

NSN: 2010-01-501-5465

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

2 EA

1 EA

P/N: 46X51R.H.

NSN: 2010-01-501-5459

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

*NSP (Not Separately Priced) **If this work is considered inherent to your business as production overhead, please insert $0.00 for the total price.

OPTION YEAR 1

Unit Total

CLIN Description

QTY.

Price Price

1 SET

B.1.2

B.1.2A Propeller: 18” Diameter, 16” Pitch

P/N: J755-18-16-1-1/4-RH-3BLD

NSN: 2010-01-419-3990

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.**

1 EA

B.1.3

B.1.3A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-LH

NSN: 2010-01-033-4476

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

10 EA

1 EA

B.1.4

B.1.4A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-RH

NSN: 2010-01-074-2420

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

1 EA

B.1.5

B.1.5A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32LH

NSN: 2010-01-125-3273

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.6

B.1.6A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32RH

NSN: 2010-01-130-4949

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.7

B.1.7A Propeller: 28” Diameter, 36” Pitch

P/N: 47B MLB 243-010 ITEM 18 PORT

NSN: 2010-01-463-9096

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

1 EA

B.1.8

B.1.8A Propeller: 28” Diameter, 36” Pitch

P/N: 47B 243-010 ITEM 17

NSN: 2010-01-463-9101

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

8 EA

1 EA

B.1.9

B.1.9A Propeller: 31” Diameter, 22” Pitch

P/N: J-5001-LH

NSN: 2010-01-450-5805

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

3 EA

1 EA

B.1.10

B.1.10A Propeller: 31” Diameter, 22” Pitch

P/N: J-5001 RH

NSN: 2010-01-450-5807

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

1 EA

B.1.11

B.1.11A Propeller: 56” Diameter, 46” Pitch

P/N: 4B56DX46P-RH

NSN: 2010-01-482-6135

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.12

B.1.12A Propeller: 48” Diameter, 46” Pitch

P/N: 48X46L.H.

NSN: 2010-01-501-5755

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

P/N: 48X46R.H.

NSN: 2010-01-501-5749

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance

B.1.13A

B.1.14

B.1.14A

Propeller: 48” Diameter, 40” Pitch

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

P/N: 75-WLIC-245-001LH

NSN: 2010-01-534-9095

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

1 EA

B.1.15

B.1.15A Propeller: 48” Diameter, 40” Pitch

P/N: 75-WLIC-245-001RH

NSN: 2010-01-534-9089

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.16

B.1.16A Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-LH

NSN: 2010-01-377-2284

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.17

B.1.17A Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-RH

NSN: 2010-01-377-2308

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.18

B.1.18A

Propeller: 48” Diameter, 43” Pitch

P/N: 48X43L.H.

NSN: 2010-01-501-5506

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.19

B.1.19A Propeller: 48” Diameter, 43” Pitch

P/N: 48X43R.H.

NSN: 2010-01-501-5504

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.20

B.1.20A Propeller: 46” Diameter, 51” Pitch

P/N: 46X51L.H.

NSN: 2010-01-501-5465

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.1.21

B.1.21A Propeller: 46” Diameter, 51” Pitch

P/N: 46X51R.H.

NSN: 2010-01-501-5459

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

**If this work is considered inherent to your business as production overhead, please insert $0.00 for the total price of this sub-CLIN.

OPTION YEAR 2

1 SET

B.2.2

B.2.2A

Propeller: 18” Diameter, 16” Pitch

P/N: J755-18-16-1-1/4-RH-3BLD

NSN: 2010-01-419-3990

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.**

1 EA

1 EA

B.2.3

B.2.3A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-LH

NSN: 2010-01-033-4476

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

10 EA

1 EA

B.2.4

B.2.4A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-RH

NSN: 2010-01-074-2420

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

1 EA

B.2.5

B.2.5A

Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32LH

NSN: 2010-01-125-3273

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.6

B.2.6A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32RH

NSN: 2010-01-130-4949

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.7

B.2.7A Propeller: 28” Diameter, 36” Pitch

P/N: 47B MLB 243-010 ITEM 18 PORT

NSN: 2010-01-463-9096

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

1 EA

B.2.8

B.2.8A Propeller: 28” Diameter, 36” Pitch

P/N: 47B 243-010 ITEM 17

NSN: 2010-01-463-9101

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

8 EA

1 EA

B.2.9

B.2.9A Propeller: 31” Diameter, 22” Pitch

P/N: J-5001-LH

NSN: 2010-01-450-5805

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

3 EA

1 EA

B.2.10

B.2.10A Propeller: 31” Diameter, 22” Pitch

P/N: J-5001 RH

NSN: 2010-01-450-5807

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

5 EA

1 EA

B.2.11

B.2.11A Propeller: 56” Diameter, 46” Pitch

P/N: 4B56DX46P-RH

NSN: 2010-01-482-6135

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.12

B.2.12A Propeller: 48” Diameter, 46” Pitch

P/N: 48X46L.H.

NSN: 2010-01-501-5755

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.13

B.2.13A Propeller: 48” Diameter, 46” Pitch

P/N: 48X46R.H.

NSN: 2010-01-501-5749

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

P/N: 75-WLIC-245-001LH

NSN: 2010-01-534-9095

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.15

B.2.15A Propeller: 48” Diameter, 40” Pitch

P/N: 75-WLIC-245-001RH

NSN: 2010-01-534-9089

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.16

B.2.16A Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-LH

NSN: 2010-01-377-2284

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.17

B.2.17A Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-RH

NSN: 2010-01-377-2308

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.18

B.2.18A Propeller: 48” Diameter, 43” Pitch

P/N: 48X43L.H.

NSN: 2010-01-501-5506

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.19

B.2.19A Propeller: 48” Diameter, 43” Pitch

P/N: 48X43R.H.

NSN: 2010-01-501-5504

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.20

B.2.20A Propeller: 46” Diameter, 51” Pitch

P/N: 46X51L.H.

NSN: 2010-01-501-5465

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

B.2.21

B.2.21A Propeller: 46” Diameter, 51” Pitch

P/N: 46X51R.H.

NSN: 2010-01-501-5459

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.

1 EA

1 EA

**If this work is considered inherent to your business as production overhead, please insert $0.00 for the total price of this sub-CLIN.

OPTION YEAR 3

1 SET

Revise, comment, and resubmit line item 1 for minor review if it is returned as deficient and or modified (this cycle can be repeated if needed.)

B.3.2

B.3.2A Propeller: 18” Diameter, 16” Pitch

P/N: J755-18-16-1-1/4-RH-3BLD

NSN: 2010-01-419-3990

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract.**

1 EA

1 EA

B.3.3

B.3.3A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-LH

NSN: 2010-01-033-4476

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

10 EA

1 EA

B.3.4

B.3.4A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-RH

NSN: 2010-01-074-2420

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

5 EA

1 EA

B.3.5

B.3.5A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32LH

NSN: 2010-01-125-3273

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.6

B.3.6A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32RH

NSN: 2010-01-130-4949

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.7

B.3.7A Propeller: 28” Diameter, 36” Pitch

P/N: 47B MLB 243-010 ITEM 18 PORT

NSN: 2010-01-463-9096

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

5 EA

1EA

B.3.8

B.3.8A Propeller: 28” Diameter, 36” Pitch

P/N: 47B 243-010 ITEM 17

NSN: 2010-01-463-9101

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

8 EA

1EA

B.3.9

B.3.9A Propeller: 31” Diameter, 22” Pitch

P/N: J-5001-LH

NSN: 2010-01-450-5805

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

3 EA

1EA

B.3.10

B.3.10A Propeller: 31” Diameter, 22” Pitch

P/N: J-5001 RH

NSN: 2010-01-450-5807

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

5 EA

1EA

B.3.11

B.3.11A Propeller: 56” Diameter, 46” Pitch

P/N: 4B56DX46P-RH

NSN: 2010-01-482-6135

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.12

B.3.12A Propeller: 48” Diameter, 46” Pitch

P/N: 48X46L.H.

NSN: 2010-01-501-5755

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.13

B.3.13A Propeller: 48” Diameter, 46” Pitch

P/N: 48X46R.H.

NSN: 2010-01-501-5749

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.14

B.3.14A Propeller: 48” Diameter, 40” Pitch

P/N: 75-WLIC-245-001LH

NSN: 2010-01-534-9095

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.15

B.3.15A Propeller: 48” Diameter, 40” Pitch

P/N: 75-WLIC-245-001RH

NSN: 2010-01-534-9089

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.16

B.3.16A Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-LH

NSN: 2010-01-377-2284

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.17

B.3.17A Propeller: 44” Diameter, 50” Pitch

P/N: 75WAGL-4400-2-RH

NSN: 2010-01-377-2308

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.18

B.3.18A Propeller: 48” Diameter, 43” Pitch

P/N: 48X43L.H.

NSN: 2010-01-501-5506

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.19

B.3.19A Propeller: 48” Diameter, 43” Pitch

P/N: 48X43R.H.

NSN: 2010-01-501-5504

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.20

B.3.20A Propeller: 46” Diameter, 51” Pitch

P/N: 46X51L.H.

NSN: 2010-01-501-5465

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.3.21

B.3.21A Propeller: 46” Diameter, 51” Pitch

P/N: 46X51R.H.

NSN: 2010-01-501-5459

Manufactured, Tested, Inspected, Preserved, Packaged, Packed, & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

1 EA

**If this work is considered inherent to your business as production overhead, please insert $0.00 for the total price of this sub-CLIN.

OPTION YEAR 4

1 SET

Revise, comment, and resubmit line item 1 for minor review if it is returned as deficient and or modified (this cycle can be repeated if needed.)

B.4.2

B.4.2A Propeller: 18” Diameter, 16” Pitch

P/N: J755-18-16-1-1/4-RH-3BLD

NSN: 2010-01-419-3990

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.4.3

B.4.3A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-LH

NSN: 2010-01-033-4476

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

10 EA

1 EA

B.4.4

B.4.4A Propeller: 26” Diameter, 28” Pitch

P/N: BM35-RH

NSN: 2010-01-074-2420

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

5 EA

1 EA

B.4.5

B.4.5A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32LH

NSN: 2010-01-125-3273

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with specification P-245-0146.

Labor, special tools, and materials to fabricate a pattern based on specific propeller attributes, produce a mold from this pattern, and develop/finish casting(s) in accordance with contract delivery order requirements. This shall be a fixed, one-time cost for the duration of the contract

1 EA

1 EA

B.4.6

B.4.6A Propeller: 38” Diameter, 32” Pitch

P/N: 55ANB38X32RH

NSN: 2010-01-130-4949

Manufactured, Tested, Inspected, Preserved, Packaged, Packed & Marked in accordance with…