Item Numbers and Salient Characteristics.docx
DOCX document 22 KB Posted
- Attached to
- Radio and TV Transmitters Federal contract opportunity
- Solicitation number
- HQ0516-12-R-0007
- Issued by
- Defense Media Activity
About this file
CLINS and Slaient Characteristics
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Questions 2.docx | DOCX document | |
| Questions.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM NO
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNK YSN - 5KW, FM
FFP
Two 5KW FM transmitters in Main/Alternate configuration. - See Table 1 CLIN Specifications for detailed requirements.
FOB: Destination
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNE ROTA - 5KW, FM, 102.5MHZ
Two 5KW FM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNE VICENZA - 5KW, FM, 106.0 or 107.0 MHZ
Two 5KW FM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 2 |
| Each |
AFNE KATTERBACH - 1KW, FM
Two 1KW FM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 2 |
| Each |
AFNK DGU - 1KW, FM, 88.5MHz
Two 1KW FM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFN BORINQUEN - 300W, FM, 90.5MHz
Two 300W - 1KW FM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFN BORINQUEN - 300W, FM, 91.1MHz
Two 300W - 1KW FM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNK CSY - 100W, FM, 88.5MHz
Two 100W - 300W FM Digital transmitters/exciters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNK CONCORD - 100W, FM, 88.5MHz
Two 100W - 300W FM Digital transmitters/exciters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNK OSN - 50W, FM, 88.5MHz
50W - 300W FM Digital transmitters/exciters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNK DGU - 5KW, AM, 1080KHz
5KW AM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNE SPG - 1KW, AM, 1143KHz
Two 1KW AM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNK CSY - 1KW, AM, 1197KHz
Two 1KW AM transmitters in Main/Alternate configuration - See Table 1 CLIN Specifications for detailed requirements.
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Each |
AFNK CSY - 250W, AM, 1161KHz
Two 250W - 1KW AM transmitters in Main/Alternate configuration - Table 1 CLIN Specifications for comple required specifications
SPECIFICATIONS TABLE 1
TABLE 1 CLIN SPECIFICATIONS
All 14 Systems supplied shall be from one manufacturer to ensure continuity in support, training, and maintenance.
CLIN0001 - 5000W FM Transmitter System salient characteristics:
1. Two 5KW FM transmitters in Main/Alternate configuration.
2. AC Input Voltage: 240VAC, 50/60Hz, Single-Phase
3. Efficiency: 50% or better
4. Power Factor: 0.90 or better
5. Output Impedance: 50 ohms
6. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
7. Must meet all FCC, DOC, and IEC 215 safety requirements
8. Analog, composite, and AES inputs.
a. AES Impedance: 110 Ohm balanced
b. L&R Impedance: 600 Ohm or 10K Ohm selectable, Balanced
9. Stereo generator.
10. IP Connectivity
11. Front Panel Control and Metering
12. Automatic transmitter switcher.
13. RF switch.
14. Low Pass Filter
15. Rack cabinets
16. Load resistor
17. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 1 each Frequency: 102.7MHz
CLIN0003 - 5000W FM Transmitter System salient characteristics:
1. Two 5KW FM transmitters in Main/Alternate configuration.
2. AC Input Voltage: 240VAC, 50/60Hz, 3-Phase D
3. Efficiency: 50% or better
4. Power Factor: 0.90 or better
5. Output Impedance: 50 ohms
6. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
7. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
8. Must Conform to all European Community Radio and telecommunications terminal equipment standards and have all required CE Conformity Markings and Inscriptions.
9. Analog, composite, and AES inputs.
a. AES Impedance: 110 Ohm balanced
b. L&R Impedance: 600 Ohm or 10K Ohm selectable, Balanced
10. Stereo generator.
11. IP Connectivity
12. Front Panel Control and Metering
13. Automatic transmitter switcher.
14. RF switch.
15. Low Pass Filter
16. Rack cabinets
17. Load resistor
18. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 1 each Frequencies: 106.0 MHz CLIN0002 - 5000W FM Transmitter System salient characteristics:
1. Two 5KW FM transmitters in Main/Alternate configuration.
2. AC Input Voltage: 208VAC, 60Hz, 3-Phase Y.
3. Efficiency: 50% or better.
4. Power Factor: 0.90 or better.
5. Output Impedance: 50 ohms.
6. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
7. Must meet all FCC, DOC, CE, and IEC 215 safety requirements.
8. Must Conform to all European Community Radio and telecommunications terminal equipment standards and have all required CE Conformity Markings and Inscriptions.
9. Analog, composite, and AES inputs.
a. AES Impedance: 110 Ohm balanced.
b. L&R Impedance: 600 Ohm or 10K Ohm selectable, Balanced.
10. Stereo generator.
11. IP Connectivity
12. Front Panel Control and Metering.
13. Automatic transmitter switcher.
14. RF switch.
15. Low Pass Filter.
16. Rack cabinets.
17. Load resistor.
18. Remote Control Unit that is GSM (cellular) Modem Compatible.
Requirement: 1 each Frequencies: 102.5MHz
CLIN0004 and CLIN0005 - 1000W FM Transmitter System salient characteristics:
1. Two 1KW FM transmitters in Main/Alternate configuration
2. AC Input Voltage: 240VAC, 50/60Hz, Single-Phase
3. Efficiency: 60% or better
4. Power Factor: 0.90 or better
5. Output Impedance: 50 ohms
6. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
7. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
8. Must Conform to all European Community Radio and telecommunications terminal equipment standards and have all required CE Conformity Markings and Inscriptions.
9. Analog, composite, and AES inputs.
a. AES Impedance: 110 Ohm balanced
b. L&R Impedance: 600 Ohm or 10K Ohm selectable, Balanced
10. Stereo generator.
11. IP Connectivity
12. Front Panel Control and Metering
13. Automatic transmitter switcher.
14. RF switch.
15. Low Pass Filter
16. Rack cabinets
17. Load resistor
18. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 2 each Frequencies: CLIN0005 -107.3MHz CLIN0004 - 88.5MHz
CLINS 0006 and 0007 - 300W FM Transmitter System salient characteristics:
1. Two 300W - 1KW FM transmitters in Main/Alternate configuration
2. AC Input Voltage: 240VAC, 50/60Hz, Single-Phase
3. Efficiency: 60% or better
4. Power Factor: 0.90 or better
5. Output Impedance: 50 ohms
6. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
7. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
8. Analog, composite, and AES inputs.
a. AES Impedance: 110 Ohm balanced
b. L&R Impedance: 600 Ohm or 10K Ohm selectable, Balanced
9. Stereo generator.
10. IP Connectivity
11. Front Panel Control and Metering
12. Automatic transmitter switcher.
13. RF switch.
14. Low Pass Filter
15. Rack cabinets
16. Load resistor
17. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 2 each Frequencies: 90.5MHz CLIN0006 91.1MHz CLIN0007
CLIN0008 and CLIN0009 100W FM Transmitter System salient characteristics:
1. Two 100W - 300W FM Digital transmitters/exciters in Main/Alternate configuration
2. AC Input Voltage: 110/240VAC, 50/60Hz, Single-Phase
3. Power Factor: 0.90 or better
4. Output Impedance: 50 ohms
5. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
6. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
7. Analog, composite, and AES inputs.
a. AES Impedance: 100-110 Ohm balanced
b. L&R Impedance: 600 Ohm or 10K Ohm selectable, Balanced
8. Stereo generator.
9. Front Panel Control
10. Automatic transmitter switcher.
11. RF switch.
12. RF output Low Pass Filter
13. Rack cabinets
14. Load resistor
15. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 2 each Frequencies: 88.5MHz CLIN0008 88.5MHz CLIN0009
CLIN0010 - 50W FM Transmitter System salient characteristics:
16. Two 50W - 300W FM Digital transmitters/exciters in Main/Alternate configuration
17. AC Input Voltage: 110/240VAC, 50/60Hz, Single-Phase
18. Power Factor: 0.90 or better
19. Output Impedance: 50 ohms
20. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
21. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
22. Analog, composite, and AES inputs.
a. AES Impedance: 100-110 Ohm balanced
b. L&R Impedance: 600 Ohm or 10K Ohm selectable, Balanced
23. Stereo generator.
24. Front Panel Control
25. Automatic transmitter switcher.
26. RF switch.
27. RF output Low Pass Filter
28. Rack cabinets
29. Load resistor
30. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 1 each Frequency: 88.5MHz CLIN0010
CLIN0011 - 5000W AM Transmitter System salient characteristics:
1. Two 5KW AM transmitters in Main/Alternate configuration
2. AC Input Voltage: 240VAC, 50/60Hz, Single-Phase
3. Efficiency: 75% or better
4. Power Factor: 0.80 or better
5. Output Impedance: 50 ohms
6. Redundant Power Supplies
7. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
8. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
9. Analog, composite
a. Impedance: 600 Ohm Balanced
10. Automatic transmitter switcher.
11. Front Panel Metering
12. RF switch.
13. Rack cabinets
14. Load resistor
15. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 1 each Frequency: 1080KHz CLIN0011
CLIN0012 and CLIN0013 1000W AM Transmitter System salient characteristics:
1. Two 1KW AM transmitters in Main/Alternate configuration
2. AC Input Voltage: 240VAC, 50/60Hz, Single-Phase
3. Efficiency: 60% or better
4. Power Factor: 0.70 or better
5. Output Impedance: 50 ohms
6. Redundant Power Supplies
7. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
8. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
9. Must Conform to all European Community Radio and telecommunications terminal equipment standards and have all required CE Conformity Markings and Inscriptions.
10. Analog, composite
a. Impedance: 600 Ohm Balanced
11. Automatic transmitter switcher.
12. Front Panel Metering
13. RF switch.
14. Rack cabinets
15. Load resistor
16. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 2 each Frequencies: 1197KHz CLIN0013 1143KHz CLIN0012
CLIN0014 - 250W AM Transmitter System salient characteristics:
1. Two 250W - 1KW AM transmitters in Main/Alternate configuration
2. AC Input Voltage: 240VAC, 50/60Hz, Single-Phase
3. Efficiency: 60% or better
4. Power Factor: 0.70 or better
5. Output Impedance: 50 ohms
6. Redundant Power Supplies
7. RF Harmonics Suppression: Must meet all FCC/DOC requirements and CCIR recommendations.
8. Must meet all FCC, DOC, CE, and IEC 215 safety requirements
9. Analog, composite
a. Impedance: 600 Ohm Balanced
10. Automatic transmitter switcher.
11. Front Panel Metering
12. RF switch.
13. Rack cabinets
14. Load resistor
15. Remote Control Unit that is GSM (cellular) Modem Compatible Requirement: 1 each Frequency: 1161KHz CLIN0014
END OF TABLE 1 CLIN SPECIFICATIONS
DELIVERY INFORMATION
| CLIN |
| DELIVERY DATE |
| QUANTITY |
| SHIP TO ADDRESS |
| UIC |
| 0001 |
| 120 dys. ADC |
| 1 |
| HQ0516 DEFENSE MEDIA ACTIVITY |
AL SOLIS
CENTRAL RECEIVING POINT
5921 16TH STREET BLDG 190
FT BELVOIR VA 22060
301-222-6567
HQ0516
File details come from the government source that posted it. Updated .