Atatchment_B_CED_Matrix.pdf
PDF 80 KB Posted
- Attached to
- Meat Slicers
- Solicitation number
- HDEC04-18-R-0018
- Issued by
-
Defense Commissary Agency
About this file
Attachment B
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Price_Sheet_Attachment_C.xlsx | XLSX spreadsheet | |
| Attachment_A_Proposal_Checklist.pdf | ||
| HDEC04-18-R-0018_Amendment_1.pdf | ||
| Price_Sheet_Attachment_C.xlsx | XLSX spreadsheet | |
| Price_Sheet_Attachment_C.xlsx | XLSX spreadsheet | |
| Attachment_A_Proposal_Checklist.docx | DOCX document | |
| Atatchment_B_CED_Matrix.docx | DOCX document | |
| HDEC04-18-R-0018.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment B CED 4SMA
Generalized Operating Specifications Proposal Reference**
Comments Initials of Offeror Rep.
25 inches long / wide, 31 inches deep, 28 inches high. Dimensional sizes, such as length, width, and height can vary no more than + / - 6 inches. This equipment is to be a table top model.
Salient Characteristics that shall be provided:
Stainless steel or aluminum carriage with no crevice in carriage and fence / baffle plate
One piece base with limited crevices or bolt holes
Minimum 0.5 Horsepower (HP) motor Minimum speed 40 slices per minute Stainless / alloy steel blade / knife Accepts product size up to 10 inches in width and up to 7 inches in height
Slices meat or cheese products to a thickness from 0 to 0.9 inches
Automatic and manual modes Product slicing action by gravity feed Non-removable blade Ring guard cover Removable blade sharpening system No volt release: slicer must be restarted in the event of a power loss
Zero blade exposure for cleaning Industry Standards / Requirement(s):
Industry Standards: Underwriters Laboratory (UL) listed and National Sanitation Foundation (NSF) (8) certification, or approved equivalent.
CE is not acceptable for a standard.
Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
Electrical Requirements:
Standard U.S.A. electrical specifications: 120 volts, 60 Hertz, 1 phase.
Minimum 6 foot cord with a NEMA Standard plug, or a manufacturer’s equivalent to comply with the equipment plug in requirements
NOTE: the operating range for 120 volts is 110 to 120 volts; the operating range for 220 volts is 208 to 230 volts.
Standard Contractor Requirements:
Must be shipped ready to assemble, plug in, and use
This equipment requires disposal: store personnel should place the equipment item in a specified area until DeCA’s liquidation manager gives disposition instructions to the store
5.3 Information to be provided by the
Contractor to the commissary at the time of delivery:
Point of Contact for Service Installation and Operating Instructions Parts List
File details come from the government source that posted it.