Testing_Requirements_for_Solicitation_HC101318QA812_6-5-18.docx

Testing Requirements for Solicitation HC101318QA812

MINIMUM TECHNICAL SPECIFICATIONS:

SPECIFIC FORMAT TO BE USED IS:

LINE RATE: 10.709 GIGABITS/S, +- 100 PPM

LINE CODE: OPTIC

ETHERNET FRAME: 9192 OCTETS (BYTES)

1. TEST AND ACCEPTANCE: 10GB LAN PHY CIRCUITS SHALL PASS A FULLY

DOCUMENTED SATISFACTORY 72 HOUR SOAK TEST BY DISA GOC AT SCOTT

AFB, IL. PRIMARY: (C) 618-229-8691 (D) 779-8691

2. TESTING PARAMETERS AND THRESHOLDS: THE FOLLOWING TESTING

PARAMETERS SHALL BE MEASURED DURING TEST AND ACCEPTANCE TESTING.

ERROR PERFORMANCE SHALL BE MEASURED AND RECORDED OVER THE

DURATION OF THE CONTIGUOUS 24 HOUR TESTING INTERVAL AND SHALL BE

MEASURED AND RECORDED PER DEFINITION IN ITU-T-Y.1564.

3. ERROR PERFORMANCE: ERROR PERFORMANCE SHALL BE BETTER THAN THE

FOLLOWING PARAMETER THRESHOLDS TO BE ACCEPTABLE:

AVAILABILITY SHALL BE GREATER THAN 99.5% OR BETTER. FRAME LOSS

SHALL BE EQUAL TO ZERO WHEN TESTING AT 10 GIGABIT

HIGHEST FRAME RATE, AND SHALL MEET ITU-T-Y.1564 STANDARDS. JITTER

SHALL BE LESS THAN 3 MSEC. DELAY SHALL BE BETTER THAN 10 MSEC

4. MEAN TIME TO LOSS OF BIT COUNT INTEGRITY (MTTLBCI) SHALL BE

GREATER THAN 24 HOURS.

5. ROUND TRIP DELAY (RTD): RTD SHALL BE MEASURED OVER THE 10GB

ETHERNET CIRCUIT AND SHALL BE LESS THAN OR EQUAL TO 10

MILLISECONDS.

A.ANY ADDRESSEE ON THE TSO WILL NOTIFY ALL

ADDRESSEES IMMEDIATELY BY MESSAGE IDENTIFYING ANY ISSUES,

PROBLEMS, OR SITUATIONS WHICH MAY PREVENT OR DELAY THE

IMPLEMENTATION OF THIS TELECOMMUNICATIONS SERVICE ORDER (TSO).

ALL STATIONS WILL REVIEW THE CONFIGURATION, EQUIPMENT, CONTACT

NUMBERS AND ADDRESSES CONTAINED IN THIS TSO AND PROVIDE UPDATES

TO ORIGINATOR OF TSO ANY ERRORS SO THAT SUBSEQUENT TSOS MAY BE

UPDATED.

B.COMPLETION REPORT: SERVICE WILL BE ACCEPTED ON BEHALF OF THE U.S.

GOVERNMENT BYDISA CONUS IP/D312-770-8627,C618-220-8627 WHO WILL

SUBMIT A COMPLETION REPORT IAW DISAC 310-130-1, CHAP 2 OF DISAC

310-70-1, CHAP 8. REPORT WILL BE ADDRESSED TO THE ORIGINATOR AND

ALL ADDRESSEES OF THIS TSO.

C.DD FORM 1368: DD FORM 1368'S (MODIFIED USE OF LEASED

COMMUNICATION FACILITIES), OR EMAIL EQUIVALENT, WILL BE

SUBMITTED, AS REQUIRED, ON THIS CIRCUIT IAW DISAC-DITCO 350-135-1

BY THE STATION DESIGNATED IN PARAGRAPH 2H AS CCO/CMO. GUIDANCE

ON SUBMISSION IS AVAILABLE AT

HTTP://WWW.DITCO.DISA.MIL/CORPORATELIBRARY/HOME.ASP. CLICK ON

"350-135-1, DEFENSE COMMERCIAL COMMUNICATIONS ACQUISITION

PROCEDURES."

D.UNSATISFACTORY SERVICE REPORTING INSTRUCTIONS: FOR UNSATISFACTORY

SERVICE OR TO REPORT EQUIPMENT AND/OR CIRCUIT PROBLEMS INVOLVING

DISA PROVIDED TRANSPORT AND/OR EQUIPMENT, PLEASE CONTACT THE

DISN CUSTOMER CONTACT CENTER (DCCC) TOLL FREE NUMBER IS

1-844-347-2457 (1-844-DISA HLP) OPTION 2, COML 1-614-692-0032

OPTION 2, DSN 312-850-0032 OPTION 2.

E.THE COMMITTED INFORMATION RATE (CIR)(10GBE) WILL REQUIRE

VENDOR TO DELIVER 10GB ETHERNET LAN PHY INTERFACE AT THE DROP

SIDE OF THE COMMERCIAL DEMARC'S AT THE "A" AND "Z" LOCATIONS.

F. TELECOMM PROVIDER MUST PROVIDE TOTAL FIBER MILES AND

ROUND-TRIP DELAY (RTD) FROM THE CUSTOMER "A" LOCATION TO THE

CUSTOMER "Z" LOCATION.

G.THIS REQUIREMENT MUST BE ENGINEERED AND PROVISIONED TOTALLY

DIVERSE END TO END TO THE GOVERNMENT'S SERVICE DELIVERY POINTS

(SDP'S) FROM TSR RU03OCT175637; MEANING THAT THE PHYSICAL PATHS

ARE TOTALLY SEPARATE INCLUDING MAN HOLES, CONDUIT, (CENTRAL

OFFICE LOCATIONS), AND FIBER BUILDS. ADDITIONALLY, AS A MINIMUM

MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR RU03OCT175637.

H.VENDOR MUST PROVIDE LIGHT LEVEL READINGS (DB LOSS) ON

EXTENSION FROM COMMERCIAL POP TO GOVERNMENT SERVICE DELIVERY

POINT (SDP) AT THE "Z" LOCATION PRIOR TO CIRCUIT TURN UP TO

THE GOVERNMENT ENSURING LEVELS ARE WITHIN

SPECS. LIGHT LEVELS MUST BE ADJUSTED TO -3 TO -9.

I. VENDOR MUST CONDUCT WALK-THROUGH SITE SURVEY PRIOR TO

INSTALLATION AT THE "Z" LOCATION ONLY.

J. VENDOR MUST CONTACT DISA GOC IP BACKBONE ENGINEERING AND

IMPLEMENTATION GROUP UPON RECEIPT OF A VALID TSO TO ESTABLISH THE

COORDINATION AND ACTIVATION PROCESS. (C) 618-220-8627 (D) 770-8627

K.PROVIDER MUST CONDUCT A SATISFACTORY 24-HOUR TEST FROM THE

DROP SIDE OF THEIR OR LOCAL EXCHANGE CARRIERS FDP

INSTALLED IN THEIR EQUIPMENT SUITE AT THE "A" LOCATION TO THE

GOVERNMENT'S SDP AT THE "Z" LOCATION AND MUST INCLUDE THE

EXTENSION BETWEEN THE COMMERCIAL DEMARC AND THE GOVERNMENT'S SDP

AT THE "Z" LOCATION. VENDOR MUST ENSURE A TEST SET IS PLACED AT

THE DROP SIDE OF TELECOMM PROVIDER'S OR LOCAL ACCESS PROVIDERS

FDP AS APPLICABLE AT THE "A" LOCATION AND A SECOND TEST SET AT

THE END OF THE FIBER JUMPERS TO BE USED FOR TERMINATION TO THE

GOVERNMENT'S SDP AT THE "Z" LOCATION. TESTING MUST BE

SATISFACTORY PRIOR TO TURN OVER TO THE GOVERNMENT FOR ACCEPTANCE

TESTING. TESTING CRITERIA: VENDOR MUST TEST THE CIRCUIT FOR 24

HOURS IAW ITU-T.Y.1564 BENCH MARKING CONFIGURATION AND

PERFORMANCE OF ETHERNET SERVICE. NOTE-ETHERNET FRAME SIZE

DESIGNATOR 'H' (MTU) IS EQUAL TO 9192 BYTES.