Attachment_1-_Product_Description_(Basic_Contract).pdf

Product Description Naval Special Warfare Command (NSWC)

Manufacturing of AR500 Ballistic Steel Target for Ranges

1. BACKGROUND

1.1 Steel targets are required to support of NSWC Ranges located throughout the United States.

2. OBJECTIVES

2.1 Naval Special Warfare Command intends to issue a firm-fixed price Indefinite Delivery Indefinite Quantity (IDIQ) contract for acquisition of steel targets and associated support items for ranges at Little Creek/Fort Story, Camp Atterbury, Fort Pickett, Fort A.P. Hill, Fort Chaffee, Stennis, MS, Coronado, CA, Hunter Liggett, CA, Hawaii, and other locations as specified at the task order level.

3. SCOPE

3.1 The Contractor shall provide the personnel, management and materials necessary to manufacture, develop and ship steel targets and associated support items. NSWC requires a minimum of 60 different types and styles of steel targets in support of Land Warfare, SNIPER Training, and Unit Level Training targets for various types of shooting and ballistic steel types and thicknesses.

These targets require various support items to mount them to hanging structures and stand them up in various types of terrain. Also the targets are intended to be mobile enough to be relocated by ATV’s and loaded by Range Technicians when they are transported, used, and stored.

4. REQUIREMENTS

4.1 The Contractor shall manufacture the following types of ½” AR500 Steel Targets in accordance with Attachment 3:

4.1.1 Ballistic Steel Target (A001-A032)

4.1.1.1 All Silhouettes (A001-A009) shall have a welded mount on the back that mounts/fits to 2X4’s.

4.1.1.2 The top of the silhouettes shall, when mounted, be tilted 20 degrees towards the ground to dissipate the majority of the bullet frag towards the ground. Tilt shall not be more than 20 degrees. See Attachment 3, page 5.

4.1.1.3 All hanging circles shall have holes to accommodate 2-1/4” 3/8-16 carriage bolts.

4.1.2 Steel Reactive and Knockdown Targets (A033-A044)

4.1.3 Ballistic Steel Replicated Shooting Vehicle Targets (A045-A054)

4.1.4 Quick Setup Target Stands (A055-A062)

4.1.5 AR500 Ballistic Steel Plates (A063-A064)

4.1.6 Miscellaneous Parts: A065-A076

4.1.7 Provide a ballistic steel pedigree certificate that shows the contractor is capable of providing AR500 ballistic steel (or better) targets.

4.2 The contractor shall use plasma cutting or water jet system to cut the targets.

4.3 The contractor shall conduct ballistic steel testing to ensure the metal is AR500 ballistic steel

(or better) prior to manufacturing the targets. Non-destructive (NDT), or chemical, or tensile, are acceptable testing criteria.

4.4 Contractor shall fulfill Delivery Orders no later than 60 days after receipt of order.

5. CONTRACTOR TRAVEL

6.1 No contractor travel is anticipated under this contract.

6. SECURITY

7.1 N/A

7. GOVERNMENT FURNISHED PROPERTY/EQUIPMENT/INFORMATION (GFP/GFE/GFI)

8.1 N/A

8. QUALITY CONTROL

9.1 The Contractor shall implement and maintain a Quality Control Plan (QCP) to ensure work performed conforms to the scope of work and meets the requirements under this PWS. The QCP shall, at a minimum provide a method for performing inspections; identifying correct thicknesses of ballistic AR500 steel, correcting and preventing problems/defective service;

addressing customer complaints, and improving the quality of services over the life of the contract.

9. QUALITY ASSURANCE

10.1 The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms and performance of the requirements in the PWS. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.

10.2 Contract Discrepancy Report (CDR). In the event of unsatisfactory contractor performance, the CO will issue a CDR that will explain the circumstances and findings concerning the incomplete or unsatisfactory service. The contractor shall acknowledge receipt of the CDR and respond in writing as to how he/she shall correct the unacceptable performance and avoid a recurrence. The Government will review the contractor's corrective action response to determine acceptability and will use any completed CDR as part of an overall evaluation of Contractor performance when determining present or future contractual actions.

10. DELIVERY ADDRESS

11.1 The Government anticipates most deliveries to be made to Joint Expeditionary Base Fort Story, Virginia Beach, VA and Joint Expeditionary Base Little Creek. Other locations may include Bowling Green, VA; Edinburgh, IN; Blackstone, VA; Stennis, MS;

Coronado, CA; Hunter Liggett, CA; and Hawaii.

11.2 Delivery locations will be specified at the delivery order level.

11. PERIOD OF PERFORMANCE

12.1 Five year ordering period from contract award