Gate Cameras - Statement of Need 11 Aug 25.pdf
PDF 162 KB Posted
- Attached to
- 22 SFS Gate Cameras Federal contract opportunity
- Solicitation number
- FA462125Q0057
About this file
This Statement of Need outlines the requirements for the 22nd Security Forces Squadron (22 SFS) at McConnell Air Force Base to install eleven Axis P3265-LVE cameras or equivalent at three installation entry control points (Gates 1, 2, and 3). The cameras must have specific technical specifications, including a 1/2.8" progressive scan RGB CMOS sensor, varifocal lens, high-resolution imaging capabilities, and advanced low-light performance. The installation involves connecting the cameras via CAT 6 LAN Cable to the base network, with monitoring capabilities at multiple locations including the Base Defense Operations Center.
The document specifies detailed camera placement at each gate, with six cameras at Gate 1, four cameras at Gate 2, and one camera at Gate 3's gate shack. All electrical components must comply with NFPA 70 standards and be U.L. labeled. The contractor is required to provide all necessary personnel, materials, and installation services, with a delivery and installation timeline of 30 days after order receipt. Additionally, the contractor must pass on all commercial warranties to the government, with warranty documentation to be submitted no later than the final inspection date.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Gate Cameras - Statement of Need (UPDATED) - 4 Sep 25 (1).pdf | ||
| Solicitation Amendment - FA462125Q00570001.pdf | ||
| Solicitation FA462125Q00570001 - SF30 - Signed.pdf | ||
| Gate Cameras QA FA462125Q0057.pdf | ||
| Gate Cameras QA FA462125Q0057.pdf | ||
| Extra Gate Cameras Diagram.pdf | ||
| Non-nuclear List.pdf | ||
| Solicitation - FA462125Q0057 - CO Signed.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
11 Aug 25
Statement of Need
Installation Base Entry Point Cameras
McConnell AFB, Kansas
1. Overview
1.1. The 22 SFS requires eleven (11) Axis P3265-LVE or equal for use at the 3 Installation Entry Control Points (Gate 1/Building 172, Gate 2/Building 63, Gate 3/Building 2086) at McConnell AFB.
2. Description
2.1. The cameras must be fixed cameras Axis P3265-LVE or equal from Non-Nuclear Configuration Management Database (CMD) Equipment Approval. Cameras must have the following features:
• 1/2.8” progressive scan RGB CMOS, Varifocal, 3.4–8.9 mm, F1.8 Horizontal field of view: 100°- 36° Vertical field of view: 53°-20° Minimum focus distance: 50 cm (20 in), 1920x1080 to 160x9, 25/30 fps with power line frequency 50/60Hz, Minimum illumination With Forensic WDR and Lightfinder 2.0: Color: 0.1 lux at 50 IRE, F1.8/F1.6 ( 9 mm/22 mm) B/W: 0 lux at 50 IRE, F1.8/F1.6 ( 9 mm/22 mm), Pan ±180°, tilt ±75°, rotation ±175°, Two-way, full duplex
2.2. Cameras will be connected via CAT 6 LAN Cable to the base network.
2.3. 22 SFS will provide Internet Protocol connectivity and connect via LAN to the Axis Video Management System (AVMS) in Building 1115 Room #139 / Base Defense Operations Center, alternate monitoring station in Building 1115 Room #165 / NCOIC, Electronic Security Systems office and Building 51 Room #114 / Alternate BDOC.
2.4. All cameras must have junction boxes with electric and camera cables ran to each location.
2.5. All electrical components, devices, and accessories will be listed and labeled as defined in NFPA 70, Article 100, by a testing agency acceptable to authorities having jurisdiction, and marked for intended use. All equipment shall be U.L. labeled. Comply with any applicable building code, local ordinances and regulations, and requirements of authorities having jurisdiction.
2.6. Delivery and installation costs must be provided.
2.7. The contractor/installer shall provide all necessary personnel, materials, equipment, transportation or any other items and services necessary to install the safes in Gate 1, Gate 2 and Gate 3.
2.8. SPECIFICS
2.8.1. GATE 1 Camera Locations (See Attachment #1)
a. Camera #1 will be affixed to ID Check Station #1
b. Camera #2 will be affixed to ID Check Station #2
c. Camera #3 will be affixed to ID Check Station #3
d. Camera #4 will be affixed to ID Check Station #4
e. Camera #5 will be affixed to ID Check Station #5
f. Camera #6 will be affixed to ID Check Station #6
2.8.2. Gate 2 Camera Locations (See Attachment #2)
a. Camera #1 will be affixed to ID Check Station #1
b. Camera #2 will be affixed to ID Check Station #2
c. Camera #3 will be affixed to ID Check Station #3
d. Camera #4 will be affixed to ID Check Station #4
2.8.3. Gate 3 Camera Location (See Attachment #3)
a. Camera will be affixed to Gate Shack
3. Warranty
3.1 The Contractor shall pass on all commercial warranties to the government. A copy of each warranty shall be furnished to the Contracting Office no later than the date of the final inspection
4. Delivery
4.1 The Contractor will deliver all requested items and complete the requested installation services by 30 Days after the receipt of order.
File details come from the government source that posted it. Updated .